board: toradex: add Colibri iMX6ULL support

Add support for the Colibri iMX6ULL module which comes with
on-board raw NAND.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>

5 files changed, 557 insertions, 0 deletions

diff --git a/board/toradex/colibri-imx6ull/Kconfig b/board/toradex/colibri-imx6ull/Kconfig
new file mode 100644
index 0000000000..3ce9885c12
--- /dev/null
+++ b/board/toradex/colibri-imx6ull/Kconfig
@@ -0,0 +1,29 @@
+if TARGET_COLIBRI_IMX6ULL
+
+config SYS_BOARD
+	default "colibri-imx6ull"
+
+config SYS_VENDOR
+	default "toradex"
+
+config SYS_CONFIG_NAME
+	default "colibri-imx6ull"
+
+config TDX_CFG_BLOCK
+	default y
+
+config TDX_HAVE_NAND
+	default y
+
+config TDX_CFG_BLOCK_OFFSET
+	default "2048"
+
+config TDX_CFG_BLOCK_OFFSET2
+	default "133120"
+
+config TDX_CFG_BLOCK_2ND_ETHADDR
+	default y
+
+source "board/toradex/common/Kconfig"
+
+endif
diff --git a/board/toradex/colibri-imx6ull/MAINTAINERS b/board/toradex/colibri-imx6ull/MAINTAINERS
new file mode 100644
index 0000000000..7cda555984
--- /dev/null
+++ b/board/toradex/colibri-imx6ull/MAINTAINERS
@@ -0,0 +1,10 @@
+Colibri iMX6ULL
+M:	Stefan Agner <stefan.agner@toradex.com>
+M:	Toradex ARM Support <support.arm@toradex.com>
+W:	http://developer.toradex.com/software/linux/linux-software
+W:	https://www.toradex.com/community
+S:	Maintained
+F:	arch/arm/dts/imx6ull-colibri.dts
+F:	board/toradex/colibri-imx6ull/
+F:	configs/colibri-imx6ull_defconfig
+F:	include/configs/colibri-imx6ull.h
diff --git a/board/toradex/colibri-imx6ull/Makefile b/board/toradex/colibri-imx6ull/Makefile
new file mode 100644
index 0000000000..f478e68049
--- /dev/null
+++ b/board/toradex/colibri-imx6ull/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (C) 2018 Toradex AG
+
+obj-y  := colibri-imx6ull.o
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
new file mode 100644
index 0000000000..fcb49a0718
--- /dev/null
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Toradex AG
+ */
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch-mx6/clock.h>
+#include <asm/arch-mx6/imx-regs.h>
+#include <asm/arch-mx6/mx6ull_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <dm/platform_data/serial_mxc.h>
+#include <fdt_support.h>
+#include <fsl_esdhc.h>
+#include <imx_thermal.h>
+#include <jffs2/load_kernel.h>
+#include <linux/sizes.h>
+#include <mmc.h>
+#include <miiphy.h>
+#include <mtd_node.h>
+#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+#include "../common/tdx-common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
+	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm |			\
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define ENET_PAD_CTRL_MII  (PAD_CTL_DSE_40ohm)
+
+#define ENET_RX_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_48ohm)
+
+#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
+		PAD_CTL_DSE_48ohm)
+
+#define NAND_PAD_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
+
+#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
+
+#define USB_CDET_GPIO	IMX_GPIO_NR(7, 14)
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TX_DATA__UART1_DTE_RX	| MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__UART1_DTE_TX	| MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RTS_B__UART1_DTE_CTS	| MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_CTS_B__UART1_DTE_RTS	| MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+#ifdef CONFIG_FSL_ESDHC
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	MX6_PAD_SD1_CLK__USDHC1_CLK	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_CMD__USDHC1_CMD	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA0__USDHC1_DATA0	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA1__USDHC1_DATA1	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA2__USDHC1_DATA2	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA3__USDHC1_DATA3	| MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX6_PAD_SNVS_TAMPER0__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+#endif
+
+static iomux_v3_cfg_t const usb_cdet_pads[] = {
+	MX6_PAD_SNVS_TAMPER2__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_NAND_MXS
+static iomux_v3_cfg_t const gpmi_pads[] = {
+	MX6_PAD_NAND_DATA00__RAWNAND_DATA00	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_DATA01__RAWNAND_DATA01	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_DATA02__RAWNAND_DATA02	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_DATA03__RAWNAND_DATA03	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_DATA04__RAWNAND_DATA04	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_DATA05__RAWNAND_DATA05	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_DATA06__RAWNAND_DATA06	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_DATA07__RAWNAND_DATA07	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_CLE__RAWNAND_CLE		| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_ALE__RAWNAND_ALE		| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_RE_B__RAWNAND_RE_B		| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_WE_B__RAWNAND_WE_B		| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B	| MUX_PAD_CTRL(NAND_PAD_CTRL),
+	MX6_PAD_NAND_READY_B__RAWNAND_READY_B	| MUX_PAD_CTRL(NAND_PAD_READY0_CTRL),
+};
+
+static void setup_gpmi_nand(void)
+{
+	imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads));
+
+	setup_gpmi_io_clk((3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
+			  (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
+}
+#endif
+
+#ifdef CONFIG_VIDEO_MXS
+static iomux_v3_cfg_t const lcd_pads[] = {
+	MX6_PAD_LCD_CLK__LCDIF_CLK		| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_ENABLE__LCDIF_ENABLE	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_HSYNC__LCDIF_HSYNC		| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_CLK__LCDIF_CLK		| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA00__LCDIF_DATA00	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA01__LCDIF_DATA01	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA02__LCDIF_DATA02	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA03__LCDIF_DATA03	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA04__LCDIF_DATA04	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA05__LCDIF_DATA05	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA06__LCDIF_DATA06	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA07__LCDIF_DATA07	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA08__LCDIF_DATA08	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA09__LCDIF_DATA09	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA10__LCDIF_DATA10	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA11__LCDIF_DATA11	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA12__LCDIF_DATA12	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA13__LCDIF_DATA13	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA14__LCDIF_DATA14	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA15__LCDIF_DATA15	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA16__LCDIF_DATA16	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+	MX6_PAD_LCD_DATA17__LCDIF_DATA17	| MUX_PAD_CTRL(LCD_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const backlight_pads[] = {
+	/* Backlight On */
+	MX6_PAD_JTAG_TMS__GPIO1_IO11		| MUX_PAD_CTRL(NO_PAD_CTRL),
+	/* Backlight PWM<A> (multiplexed pin) */
+	MX6_PAD_NAND_WP_B__GPIO4_IO11		| MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#define GPIO_BL_ON IMX_GPIO_NR(1, 11)
+#define GPIO_PWM_A IMX_GPIO_NR(4, 11)
+
+static int setup_lcd(void)
+{
+	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+
+	imx_iomux_v3_setup_multiple_pads(backlight_pads, ARRAY_SIZE(backlight_pads));
+
+	/* Set BL_ON */
+	gpio_request(GPIO_BL_ON, "BL_ON");
+	gpio_direction_output(GPIO_BL_ON, 1);
+
+	/* Set PWM<A> to full brightness (assuming inversed polarity) */
+	gpio_request(GPIO_PWM_A, "PWM<A>");
+	gpio_direction_output(GPIO_PWM_A, 0);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+static iomux_v3_cfg_t const fec2_pads[] = {
+	MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2		| MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION,
+	MX6_PAD_GPIO1_IO06__ENET2_MDIO			| MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+	MX6_PAD_GPIO1_IO07__ENET2_MDC			| MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+	MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00		| MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01		| MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX6_PAD_ENET2_RX_ER__ENET2_RX_ER		| MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX6_PAD_ENET2_RX_EN__ENET2_RX_EN		| MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+	MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00		| MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01		| MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX6_PAD_ENET2_TX_EN__ENET2_TX_EN		| MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_fec(void)
+{
+	imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads));
+}
+#endif
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FSL_ESDHC
+
+#define USDHC1_CD_GPIO	IMX_GPIO_NR(5, 0)
+
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
+	{USDHC1_BASE_ADDR, 0, 4},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = !gpio_get_value(USDHC1_CD_GPIO);
+		break;
+	}
+
+	return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+
+	/* USDHC1 is mmc0 */
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			imx_iomux_v3_setup_multiple_pads(usdhc1_pads,
+							 ARRAY_SIZE(usdhc1_pads));
+			gpio_request(USDHC1_CD_GPIO, "usdhc1_cd");
+			gpio_direction_input(USDHC1_CD_GPIO);
+			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers"
+				"(%d) than supported by the board\n", i + 1);
+			return -EINVAL;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FEC_MXC
+
+static int setup_fec(void)
+{
+	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	int ret;
+
+	setup_iomux_fec();
+
+	/* provide the PHY clock from the i.MX 6 */
+	ret = enable_fec_anatop_clock(1, ENET_50MHZ);
+	if (ret)
+		return ret;
+
+	/* Use 50M anatop REF_CLK and output it on the ENET2_TX_CLK */
+	clrsetbits_le32(&iomuxc_regs->gpr[1],
+			IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK,
+			IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+	return 0;
+}
+#endif
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_FEC_MXC
+	setup_fec();
+#endif
+
+#ifdef CONFIG_NAND_MXS
+	setup_gpmi_nand();
+#endif
+
+#ifdef CONFIG_VIDEO_MXS
+	setup_lcd();
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+	imx_iomux_v3_setup_multiple_pads(usb_cdet_pads, ARRAY_SIZE(usb_cdet_pads));
+	gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+/* TODO */
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"nand", MAKE_CFGVAL(0x40, 0x34, 0x00, 0x00)},
+	{"sd1", MAKE_CFGVAL(0x10, 0x10, 0x00, 0x00)},
+	{NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+	int minc, maxc;
+
+	if (get_cpu_temp_grade(&minc, &maxc) != TEMP_COMMERCIAL)
+		env_set("variant", "-wifi");
+
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+#ifdef CONFIG_CMD_USB_SDP
+	if (is_boot_from_usb()) {
+		printf("Serial Downloader recovery mode, using sdp command\n");
+		env_set("bootdelay", "0");
+		env_set("bootcmd", "sdp 0");
+	}
+#endif /* CONFIG_CMD_USB_SDP */
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Model: Toradex Colibri iMX6ULL\n");
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
+	static struct node_info nodes[] = {
+		{ "fsl,imx6ull-gpmi-nand", MTD_DEV_TYPE_NAND, },
+		{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, },
+	};
+
+	/* Update partition nodes using info from mtdparts env var */
+	puts("   Updating MTD partitions...\n");
+	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
+
+	return ft_common_board_setup(blob, bd);
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+static iomux_v3_cfg_t const usb_otg2_pads[] = {
+		MX6_PAD_GPIO1_IO02__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_ehci_hcd_init(int port)
+{
+	switch (port) {
+	case 0:
+		break;
+	case 1:
+		imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
+						 ARRAY_SIZE(usb_otg2_pads));
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+int board_usb_phy_mode(int port)
+{
+	switch (port) {
+	case 0:
+		if (gpio_get_value(USB_CDET_GPIO))
+			return USB_INIT_DEVICE;
+		else
+			return USB_INIT_HOST;
+	case 1:
+	default:
+		return USB_INIT_HOST;
+	}
+}
+#endif
+
+static struct mxc_serial_platdata mxc_serial_plat = {
+	.reg = (struct mxc_uart *)UART1_BASE,
+	.use_dte = 1,
+};
+
+U_BOOT_DEVICE(mxc_serial) = {
+	.name = "serial_mxc",
+	.platdata = &mxc_serial_plat,
+};
diff --git a/board/toradex/colibri-imx6ull/imximage.cfg b/board/toradex/colibri-imx6ull/imximage.cfg
new file mode 100644
index 0000000000..2ce55a610a
--- /dev/null
+++ b/board/toradex/colibri-imx6ull/imximage.cfg
@@ -0,0 +1,106 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright (C) 2018 Toradex AG
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : nand
+ */
+
+BOOT_FROM	nand
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Enable all clocks */
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E04B4 0x000C0000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x000C0030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000030
+DATA 4 0x020E0264 0x00000030
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00000030
+DATA 4 0x020E0284 0x00000030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B080C 0x00000004
+DATA 4 0x021B083C 0x41640158
+DATA 4 0x021B0848 0x40403237
+DATA 4 0x021B0850 0x40403C33
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B08C0 0x00944009
+DATA 4 0x021B08b8 0x00000800
+DATA 4 0x021B0004 0x0002002D
+DATA 4 0x021B0008 0x1B333030
+DATA 4 0x021B000C 0x676B52F3
+DATA 4 0x021B0010 0xB66D0B63
+DATA 4 0x021B0014 0x01FF00DB
+DATA 4 0x021B0018 0x00201740
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B002C 0x000026D2
+DATA 4 0x021B0030 0x006B1023
+DATA 4 0x021B0040 0x0000004F
+DATA 4 0x021B0000 0x84180000
+DATA 4 0x021B0890 0x00400000
+DATA 4 0x021B001C 0x02008032
+DATA 4 0x021B001C 0x00008033
+DATA 4 0x021B001C 0x00048031
+DATA 4 0x021B001C 0x15208030
+DATA 4 0x021B001C 0x04008040
+DATA 4 0x021B0020 0x00000800
+DATA 4 0x021B0818 0x00000227
+DATA 4 0x021B0004 0x0002552D
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+