board: ge: ppd: Enable CONFIG_DM_MMC

Use MMC device model, and remove USDHC pin configuration code since the
pinctrl driver is used.

Signed-off-by: Ian Ray <ian.ray@ge.com>

1 files changed, 0 insertions, 73 deletions

diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c
index 23bfe55541..9e13a24755 100644
--- a/board/ge/mx53ppd/mx53ppd.c
+++ b/board/ge/mx53ppd/mx53ppd.c
@@ -122,79 +122,6 @@ static void setup_iomux_fec(void)
 	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
 }
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC3_BASE_ADDR},
-	{MMC_SDHC1_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	return 1;
-}
-
-#define SD_CMD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
-				 PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL		(PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
-				 PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
-	static const iomux_v3_cfg_t sd1_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-			     SD_CMD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL),
-		MX53_PAD_EIM_DA11__GPIO3_11,
-	};
-
-	static const iomux_v3_cfg_t sd2_pads[] = {
-		NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
-		NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
-		MX53_PAD_EIM_DA13__GPIO3_13,
-	};
-
-	u32 index;
-	int ret;
-
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-	esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
-	for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) {
-		switch (index) {
-		case 0:
-			imx_iomux_v3_setup_multiple_pads(sd1_pads,
-							 ARRAY_SIZE(sd1_pads));
-			break;
-		case 1:
-			imx_iomux_v3_setup_multiple_pads(sd2_pads,
-							 ARRAY_SIZE(sd2_pads));
-			break;
-		default:
-			printf("Warning: you configured more ESDHC controller (%d) as supported by the board(2)\n",
-			       CONFIG_SYS_FSL_ESDHC_NUM);
-			return -EINVAL;
-		}
-		ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-#endif
-
 #define I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
 			 PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)