Merge git://git.denx.de/u-boot-marvell

4 files changed, 52 insertions, 3 deletions

diff --git a/board/Marvell/db-88f6820-gp/README b/board/Marvell/db-88f6820-gp/README
new file mode 100644
index 0000000000..9bea5b35cb
--- /dev/null
+++ b/board/Marvell/db-88f6820-gp/README
@@ -0,0 +1,18 @@
+Update from original Marvell U-Boot to mainline U-Boot:
+-------------------------------------------------------
+
+The resulting image including the SPL binary with the
+full DDR setup is "u-boot-spl.kwb".
+
+To update the SPI NOR flash, please use the following
+command:
+
+=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\
+sf update 2000000 0 60000
+
+Note that the original Marvell U-Boot seems to have
+problems with the "sf update" command. This does not
+work reliable. So here this command should be used:
+
+=> sf probe;tftpboot 2000000 db-88f6820-gp/u-boot-spl.kwb;\
+sf erase 0 60000;sf write 2000000 0 60000
diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
index 51ac495a44..e661fa1296 100644
--- a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
+++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
@@ -11,6 +11,8 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 
+#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #define BIT(nr)				(1UL << (nr))
@@ -54,6 +56,35 @@ static struct marvell_io_exp io_exp[] = {
 	{ 0x21, 3, 0xC0 }  /* Output Data, register#1 */
 };
 
+/*
+ * Define the DDR layout / topology here in the board file. This will
+ * be used by the DDR3 init code in the SPL U-Boot version to configure
+ * the DDR3 controller.
+ */
+static struct hws_topology_map board_topology_map = {
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
+	{ { { {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0} },
+	    SPEED_BIN_DDR_1866L,	/* speed_bin */
+	    BUS_WIDTH_8,		/* memory_width */
+	    MEM_4G,			/* mem_size */
+	    DDR_FREQ_800,		/* frequency */
+	    0, 0,			/* cas_l cas_wl */
+	    HWS_TEMP_LOW} },		/* temperature */
+	5,				/* Num Of Bus Per Interface*/
+	BUS_MASK_32BIT			/* Busses mask */
+};
+
+struct hws_topology_map *ddr3_get_topology_map(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &board_topology_map;
+}
+
 int board_early_init_f(void)
 {
 	/* Configure MPP */
diff --git a/board/Marvell/db-88f6820-gp/kwbimage.cfg b/board/Marvell/db-88f6820-gp/kwbimage.cfg
index e81245420f..cc05792556 100644
--- a/board/Marvell/db-88f6820-gp/kwbimage.cfg
+++ b/board/Marvell/db-88f6820-gp/kwbimage.cfg
@@ -9,4 +9,4 @@ VERSION		1
 BOOT_FROM	spi
 
 # Binary Header (bin_hdr) with DDR3 training code
-BINARY board/Marvell/db-88f6820-gp/binary.0 0000005b 00000068
+BINARY spl/u-boot-spl.bin 0000005b 00000068
diff --git a/board/maxbcm/maxbcm.c b/board/maxbcm/maxbcm.c
index 2fbb90cfff..119ba4c6c8 100644
--- a/board/maxbcm/maxbcm.c
+++ b/board/maxbcm/maxbcm.c
@@ -11,8 +11,8 @@
 #include <asm/arch/soc.h>
 #include <linux/mbus.h>
 
-#include "../drivers/ddr/mvebu/ddr3_hw_training.h"
-#include "../arch/arm/mach-mvebu/serdes/high_speed_env_spec.h"
+#include "../drivers/ddr/marvell/axp/ddr3_hw_training.h"
+#include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h"
 
 DECLARE_GLOBAL_DATA_PTR;