Merge branch 'master' of http://www.denx.de/git/u-boot

7 files changed, 313 insertions, 12 deletions

diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index 3a50b095ca..a0acbba70c 100644
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -76,6 +76,9 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_MAN_SST:
 		printf("SST ");
 		break;
+        case FLASH_MAN_MX:
+		printf ("MACRONIX ");
+		break;
 	default:
 		printf("Unknown Vendor ");
 		break;
@@ -124,6 +127,9 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_STMW320DT:
 		printf ("M29W320DT (32 M, top sector)\n");
 		break;
+	case FLASH_MXLV320T:
+		printf ("MXLV320T (32 Mbit, top sector)\n");
+		break;
 	default:
 		printf("Unknown Chip Type\n");
 		break;
@@ -375,6 +381,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
 		return flash_erase_2(info, s_first, s_last);
 	} else {
@@ -555,6 +562,7 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
 	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT)) {
 		return write_word_2(info, dest, data);
 	} else {
@@ -648,6 +656,9 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
+	case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+		info->flash_id = FLASH_MAN_MX;
+		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
@@ -676,6 +687,12 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 		info->sector_count = 67;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
+	case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+		info->flash_id += FLASH_MXLV320T;
+		info->sector_count = 71;
+		info->size = 0x00400000;
+		break;	/* => 4 MB	*/
+
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		return (0);	/* => no or unknown flash */
@@ -711,6 +728,19 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
 			--i;
 			info->start[i] = base;
 		}
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00002000;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000a000;
+		info->start[i--] = base + info->size - 0x0000c000;
+		info->start[i--] = base + info->size - 0x0000e000;
+		info->start[i--] = base + info->size - 0x00010000;
+
+		for (; i >= 0; i--)
+			info->start[i] = base + i * 0x00010000;
 	} else {
 		if (info->flash_id & FLASH_BTYPE) {
 			/* set sector offsets for bottom boot block type        */
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
index cb28936681..c9eca686b2 100644
--- a/board/amcc/yucca/init.S
+++ b/board/amcc/yucca/init.S
@@ -82,9 +82,49 @@
  *************************************************************************/
 
 	.section .bootpg,"ax"
-	.globl tlbtab
 
-tlbtab:
+/**************************************************************************
+ * TLB table for revA
+ *************************************************************************/
+	.globl tlbtabA
+tlbtabA:
+	tlbtab_start
+	tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
+
+	tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+
+	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbtab_end
+
+/**************************************************************************
+ * TLB table for revB
+ *
+ * Notice: revB of the 440SPe chip is very strict about PLB real addresses
+ * and ranges to be mapped for config space: it seems to only work with
+ * d_nnnn_nnnn range (hangs the core upon config transaction attempts when
+ * set otherwise) while revA uses c_nnnn_nnnn.
+ *************************************************************************/
+	.globl tlbtabB
+tlbtabB:
 	tlbtab_start
 	tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
 
@@ -94,11 +134,19 @@ tlbtab:
 	tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
 
 	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
-	tlbentry(CFG_FPGA_BASE,SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+	tlbentry(CFG_FPGA_BASE, SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
 
-	tlbentry(CFG_OPER_FLASH,SZ_16M,0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_OPER_FLASH, SZ_16M, 0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
 	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
 
 	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index ce1312cf7d..af12839c2c 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -21,12 +21,16 @@
  * MA 02111-1307 USA
  *
  * Port to AMCC-440SPE Evaluation Board SOP - April 2005
+ *
+ * PCIe supporting routines derived from Linux 440SPe PCIe driver.
  */
 
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
 #include <i2c.h>
+#include <asm-ppc/io.h>
+
 #include "yucca.h"
 
 void fpga_init (void);
@@ -39,6 +43,9 @@ int get_console_port(void);
 unsigned long ppcMfcpr(unsigned long cpr_reg);
 unsigned long ppcMfsdr(unsigned long sdr_reg);
 
+int ppc440spe_init_pcie_rootport(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+
 #define DEBUG_ENV
 #ifdef DEBUG_ENV
 #define DEBUGF(fmt,args...) printf(fmt ,##args)
@@ -908,6 +915,7 @@ void pci_target_init(struct pci_controller * hose )
 }
 #endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
+#if defined(CONFIG_PCI)
 /*************************************************************************
  *  is_pci_host
  *
@@ -923,12 +931,132 @@ void pci_target_init(struct pci_controller * hose )
  *
  *
  ************************************************************************/
-#if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
 	/* The yucca board is always configured as host. */
 	return 1;
 }
+
+
+int yucca_pcie_card_present(int port)
+{
+	u16 reg;
+
+	reg = in_be16((u16 *)FPGA_REG1C);
+	switch(port) {
+	case 0:
+		return !(reg & FPGA_REG1C_PE0_PRSNT);
+	case 1:
+		return !(reg & FPGA_REG1C_PE1_PRSNT);
+	case 2:
+		return !(reg & FPGA_REG1C_PE2_PRSNT);
+	default:
+		return 0;
+	}
+}
+
+/*
+ * For the given slot, set rootpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * and turn off reset.
+ */
+void yucca_setup_pcie_fpga_rootpoint(int port)
+{
+	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+	switch(port) {
+	case 0:
+		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
+		endpoint    = 0;
+		power 	    = FPGA_REG1A_PE0_PWRON;
+		green_led   = FPGA_REG1A_PE0_GLED;
+		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE0_YLED;
+		reset_off   = FPGA_REG1C_PE0_PERST;
+		break;
+	case 1:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
+		power 	    = FPGA_REG1A_PE1_PWRON;
+		green_led   = FPGA_REG1A_PE1_GLED;
+		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE1_YLED;
+		reset_off   = FPGA_REG1C_PE1_PERST;
+		break;
+	case 2:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
+		power 	    = FPGA_REG1A_PE2_PWRON;
+		green_led   = FPGA_REG1A_PE2_GLED;
+		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE2_YLED;
+		reset_off   = FPGA_REG1C_PE2_PERST;
+		break;
+
+	default:
+		return;
+	}
+
+	out_be16((u16 *)FPGA_REG1A,
+		 ~(power | clock | green_led) &
+		 (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+
+	out_be16((u16 *)FPGA_REG1C,
+		 ~(endpoint | reset_off) &
+		 (rootpoint | in_be16((u16 *)FPGA_REG1C)));
+	/*
+	 * Leave device in reset for a while after powering on the
+	 * slot to give it a chance to initialize.
+	 */
+	udelay(250 * 1000);
+
+	out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
+}
+
+
+static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
+
+void pcie_setup_hoses(void)
+{
+	struct pci_controller *hose;
+	int i, bus;
+
+	/*
+	 * assume we're called after the PCIX hose is initialized, which takes
+	 * bus ID 0 and therefore start numbering PCIe's from 1.
+	 */
+	bus = 1;
+	for (i = 0; i <= 2; i++) {
+		/* Check for yucca card presence */
+		if (!yucca_pcie_card_present(i))
+			continue;
+
+		yucca_setup_pcie_fpga_rootpoint(i);
+
+		if (ppc440spe_init_pcie_rootport(i)) {
+			printf("PCIE%d: initialization failed\n", i);
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno  = bus;
+		bus++;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+			CFG_PCIE_MEMSIZE,
+			PCI_REGION_MEM
+			);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		ppc440spe_setup_pcie(hose, i);
+		hose->last_busno = pci_hose_scan(hose);
+	}
+}
 #endif	/* defined(CONFIG_PCI) */
 
 int misc_init_f (void)
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 167dc0f846..775030c17c 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -203,6 +203,8 @@ int checkboard (void)
 
 int misc_init_r (void)
 {
+	ulong flash_sup_end, snum;
+
 	/*
 	 * Adjust flash start and offset to detected values
 	 */
@@ -257,6 +259,12 @@ int misc_init_r (void)
 			       (flash_info[0].start[0] - 1) + flash_info[0].size,
 			       &flash_info[0]);
 		*(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
+		printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n");
+		flash_info[0].size = 32 << 20;
+		for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20); 
+			flash_info[0].start[snum] < flash_sup_end; 
+			snum++);
+		flash_info[0].sector_count = snum;
 	}
 
 	return (0);
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index c37d4c662e..7af69f21a2 100755
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -30,8 +30,8 @@
 #include <command.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_BSP)
-#if defined (CONFIG_STK52XX)
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define DEFAULT_VOL	45
 #define DEFAULT_FREQ	500
 #define DEFAULT_DURATION	200
@@ -537,7 +537,9 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	return rcode;
 }
+#endif
 
+#if defined(CONFIG_STK52XX)
 void led_init(void)
 {
 	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
@@ -736,7 +738,9 @@ int do_led(char *argv[])
 
 	return 0;
 }
+#endif
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 /*
  * return 1 on CAN initialization failure
  * return 0 if no failure
@@ -1106,6 +1110,7 @@ int do_rs232(char *argv[])
 	return error_status;
 }
 
+#ifndef CONFIG_FO300
 static void sm501_backlight (unsigned int state)
 {
 	if (state == BL_ON) {
@@ -1115,6 +1120,7 @@ static void sm501_backlight (unsigned int state)
 		*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
 			~((1 << 26) | (1 << 27));
 }
+#endif
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1124,7 +1130,9 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	printf ("Revision 100 of STK52XX not supported!\n");
 	return 1;
 #endif
+#if defined(CONFIG_STK52XX)
 	led_init();
+#endif
 	can_init();
 
 	switch (argc) {
@@ -1152,6 +1160,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			else
 				printf ("Error\n");
 			return rcode;
+#ifndef CONFIG_FO300
 		} else if (strncmp (argv[1], "backlight", 4) == 0) {
 			if (strncmp (argv[2], "on", 2) == 0) {
 				sm501_backlight (BL_ON);
@@ -1161,14 +1170,17 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				sm501_backlight (BL_OFF);
 				return 0;
 			}
+#endif
 		}
 		break;
 
+#if defined(CONFIG_STK52XX)
 	case 4:
 		if (strcmp (argv[1], "led") == 0) {
 			return (do_led (argv));
 		}
 		break;
+#endif
 
 	default:
 		break;
@@ -1204,7 +1216,9 @@ U_BOOT_CMD(
 	"[channel]\n"
 	"    - play short beep on \"l\"eft or \"r\"ight channel\n"
 );
+#endif /* CONFIG_STK52XX  || CONFIG_FO300 */
 
+#if defined(CONFIG_STK52XX)
 U_BOOT_CMD(
 	fkt ,	4,	1,	cmd_fkt,
 	"fkt     - Function test routines\n",
@@ -1217,5 +1231,14 @@ U_BOOT_CMD(
 	"fkt backlight on/off\n"
 	"     - switch backlight on or off\n"
 );
-#endif /* CONFIG_STK52XX */
+#elif defined(CONFIG_FO300)
+U_BOOT_CMD(
+	fkt ,	3,	1,	cmd_fkt,
+	"fkt     - Function test routines\n",
+	"fkt can\n"
+	"     - loopback plug for X16/X29 required\n"
+	"fkt rs232 number\n"
+	"     - loopback plug(s) for X21/X22 required\n"
+);
+#endif
 #endif /* CFG_CMD_BSP */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index d6f7737d5b..c8350ab3b5 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -290,8 +290,10 @@ int checkboard (void)
 # define CARRIER_NAME	"TB5200"
 #elif defined(CONFIG_CAM5200)
 # define CARRIER_NAME	"Cam5200"
+#elif defined(CONFIG_FO300)
+# define CARRIER_NAME	"FO300"
 #else
-# error "Unknown carrier board"
+# error "UNKNOWN"
 #endif
 
 	puts (	"Board: " MODULE_NAME " (TQ-Components GmbH)\n"
@@ -541,7 +543,11 @@ int last_stage_init (void)
 
 #ifdef CONFIG_VIDEO_SM501
 
+#ifdef CONFIG_FO300
+#define DISPLAY_WIDTH   800
+#else
 #define DISPLAY_WIDTH   640
+#endif
 #define DISPLAY_HEIGHT  480
 
 #ifdef CONFIG_VIDEO_SM501_8BPP
@@ -571,6 +577,28 @@ static const SMI_REGS init_regs [] =
 	{0x80218, 0x000201e9},
 	{0x80200, 0x00013306},
 #else  /* panel + CRT */
+#ifdef CONFIG_FO300
+	{0x00004, 0x0},
+	{0x00048, 0x00021807},
+	{0x0004C, 0x301a0a01},
+	{0x00054, 0x1},
+	{0x00040, 0x00021807},
+	{0x00044, 0x091a0a01},
+	{0x00054, 0x0},
+	{0x80000, 0x0f013106},
+	{0x80004, 0xc428bb17},
+	{0x8000C, 0x00000000},
+	{0x80010, 0x0C800C80},
+	{0x80014, 0x03200000},
+	{0x80018, 0x01e00000},
+	{0x8001C, 0x00000000},
+	{0x80020, 0x01e00320},
+	{0x80024, 0x042a031f},
+	{0x80028, 0x0086034a},
+	{0x8002C, 0x020c01df},
+	{0x80030, 0x000201ea},
+	{0x80200, 0x00010000},
+#else
 	{0x00004, 0x0},
 	{0x00048, 0x00021807},
 	{0x0004C, 0x091a0a01},
@@ -591,6 +619,7 @@ static const SMI_REGS init_regs [] =
 	{0x8002C, 0x020c01df},
 	{0x80030, 0x000201e9},
 	{0x80200, 0x00010000},
+#endif /* #ifdef CONFIG_FO300 */
 #endif
 	{0, 0}
 };
@@ -604,7 +633,7 @@ void video_get_info_str (int line_number, char *info)
 {
 	if (line_number == 1) {
 	strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200)
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300)
 	} else if (line_number == 2) {
 #if defined (CONFIG_STK52XX)
 		strcpy (info, "        on a STK52xx carrier board");
@@ -612,6 +641,9 @@ void video_get_info_str (int line_number, char *info)
 #if defined (CONFIG_TB5200)
 		strcpy (info, "        on a TB5200 carrier board");
 #endif
+#if defined (CONFIG_FO300)
+		strcpy (info, "        on a FO300 carrier board");
+#endif
 #endif
 	}
 	else {
@@ -697,3 +729,33 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
+
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+#ifdef CONFIG_FO300
+int board_early_init_f (void)
+{
+	vu_long timer3_status;
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* Configure GPT3 as GPIO input */
+	*(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
+
+	/* Read in TIMER_3 pin status */
+	timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
+	
+#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
+	/* Force silent console mode if S1 switch
+	 * is in closed position (TIMER_3 pin status is LOW). */
+	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
+#else
+	/* Force silent console mode if S1 switch
+	 * is in open position (TIMER_3 pin status is HIGH). */
+	if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
+#endif
+		gd->flags |= GD_FLG_SILENT;
+
+	return 0;
+}
+#endif
+#endif
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 26e52d29e8..d8a726b226 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -175,9 +175,11 @@ int misc_init_r (void)
 #endif /* CONFIG_VERSION_VARIABLE */
 
 #ifdef CONFIG_AUTO_UPDATE
-	extern int do_auto_update(void);
-	/* this has priority over all else */
-	do_auto_update();
+	{
+		extern int do_auto_update(void);
+		/* this has priority over all else */
+		do_auto_update();
+	}
 #endif
 
 	for (i = 0; i < KEYBD_KEY_NUM; ++i) {