New board directory and config for the benq delta board (copied from

zylonite). Minor pxa-regs.h update.

6 files changed, 992 insertions, 0 deletions

diff --git a/board/delta/Makefile b/board/delta/Makefile
new file mode 100644
index 0000000000..d968efbf81
--- /dev/null
+++ b/board/delta/Makefile
@@ -0,0 +1,48 @@
+
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= delta.o flash.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/delta/config.mk b/board/delta/config.mk
new file mode 100644
index 0000000000..09b0f71557
--- /dev/null
+++ b/board/delta/config.mk
@@ -0,0 +1,4 @@
+#TEXT_BASE = 0x0
+#TEXT_BASE = 0xa1700000
+#TEXT_BASE = 0xa3080000
+TEXT_BASE = 0xa3008000
diff --git a/board/delta/delta.c b/board/delta/delta.c
new file mode 100644
index 0000000000..e618ab96a1
--- /dev/null
+++ b/board/delta/delta.c
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* arch number of Lubbock-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	setenv("stdout", "serial");
+	setenv("stderr", "serial");
+	return 0;
+}
+
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
+
+	return 0;
+}
diff --git a/board/delta/flash.c b/board/delta/flash.c
new file mode 100644
index 0000000000..883c1ba3b3
--- /dev/null
+++ b/board/delta/flash.c
@@ -0,0 +1,434 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+
+/* Board support for 1 or 2 flash devices */
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)               __swab16(x)
+#else
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)               __swab32(x)
+#endif
+
+#define FPW	   FLASH_PORT_WIDTH
+#define FPWV   FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+void inline spin_wheel (void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+#if 0
+	int i;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			break;
+		case 1:
+			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+			break;
+		default:
+			panic ("configured too many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + monitor_flash_len - 1,
+			&flash_info[0] );
+
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+
+	return size;
+#endif
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+			info->protect[i] = 0;
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F128J3A:
+		printf ("28F128J3A\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
+{
+	volatile FPW value;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb ();
+	value = addr[0];
+
+	switch (value) {
+
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);			/* no or unknown flash  */
+	}
+
+	mb ();
+	value = addr[1];			/* device ID        */
+
+	switch (value) {
+
+	case (FPW) INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x02000000;
+		break;				/* => 16 MB     */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+			info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	start = get_timer (0);
+	last = start;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf ("Erasing sector %2d ... ", sect);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
+
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
+
+			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
+					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
+					rcode = 1;
+					break;
+				}
+			}
+
+			*addr = 0x00500050;	/* clear status register cmd.   */
+			*addr = 0x00FF00FF;	/* resest to read mode          */
+
+			printf (" done\n");
+		}
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel ();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (0);
+}
+
+void inline spin_wheel (void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S
new file mode 100644
index 0000000000..4d62be5d5e
--- /dev/null
+++ b/board/delta/lowlevel_init.S
@@ -0,0 +1,375 @@
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE:  .long   CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+   .macro CPWAIT reg
+   mrc  p15,0,\reg,c2,c0,0
+   mov  \reg,\reg
+   sub  pc,pc,#4
+   .endm
+
+
+.macro wait time
+	ldr             r2, =OSCR
+	mov             r3, #0
+	str             r3, [r2]
+0:
+	ldr             r3, [r2]
+	cmp             r3, \time
+	bls             0b
+.endm
+			
+/*
+ * 	Memory setup
+ */
+
+.globl lowlevel_init
+lowlevel_init:
+	/* Set up GPIO pins first ----------------------------------------- */
+	mov      r10, lr
+	
+        /*  Configure GPIO Pins 41 - 48 as UART1 / altern. Fkt. 2 */
+	ldr             r0, =0x40E10438 @ GPIO41 FFRXD
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+	ldr             r0, =0x40E1043C @ GPIO42 FFTXD
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+	ldr             r0, =0x40E10440 @ GPIO43 FFCTS
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+	ldr             r0, =0x40E10444 @ GPIO 44 FFDCD
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+	ldr             r0, =0x40E10448 @ GPIO 45 FFDSR
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+	ldr             r0, =0x40E1044C @ GPIO 46 FFRI
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+	ldr             r0, =0x40E10450 @ GPIO 47 FFDTR
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+	ldr             r0, =0x40E10454 @ GPIO 48
+	ldr             r1, =0x802
+	str             r1, [r0]
+
+        /* tebrandt - ASCR, clear the RDH bit */
+	ldr             r0, =ASCR	
+	ldr             r1, [r0]
+	bic             r1, r1, #0x80000000
+	str             r1, [r0]
+	
+	/* ---------------------------------------------------------------- */
+	/* Enable memory interface                                          */
+	/*                                                                  */
+	/* The sequence below is based on the recommended init steps        */
+	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
+	/* Chapter 10.                                                      */
+	/* ---------------------------------------------------------------- */
+
+	/* ---------------------------------------------------------------- */
+	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
+	/*         clocks to settle. Only necessary after hard reset...     */
+	/*         FIXME: can be optimized later                            */
+	/* ---------------------------------------------------------------- */
+
+	/* mk:	 replaced with wait macro */
+/* 	ldr r3, =OSCR			/\* reset the OS Timer Count to zero *\/ */
+/* 	mov r2, #0 */
+/* 	str r2, [r3] */
+/* 	ldr r4, =0x300			/\* really 0x2E1 is about 200usec,   *\/ */
+/* 					/\* so 0x300 should be plenty        *\/ */
+/* 1: */
+/* 	ldr r2, [r3] */
+/* 	cmp r4, r2 */
+/* 	bgt 1b */
+	wait #300
+	
+mem_init:
+
+	/* configure the MEMCLKCFG register */
+        ldr             r1, =MEMCLKCFG
+        ldr             r2, =0x00010001
+        str             r2, [r1]             @ WRITE
+        ldr             r2, [r1]             @ DELAY UNTIL WRITTEN
+        
+	/* set CSADRCFG[0] to data flash SRAM mode */
+	ldr             r1, =CSADRCFG0
+	ldr             r2, =0x00320809
+	str             r2, [r1]             @ WRITE
+	ldr             r2, [r1]             @ DELAY UNTIL WRITTEN
+        
+	/* set CSADRCFG[1] to data flash SRAM mode */
+	ldr             r1, =CSADRCFG1
+	ldr             r2, =0x00320809
+	str             r2, [r1]             @ WRITE
+	ldr             r2, [r1]             @ DELAY UNTIL WRITTEN
+        
+	/* set MSC 0 register for SRAM memory */
+        ldr             r1, =MSC0
+        ldr             r2, =0x11191119
+        str             r2, [r1]             @ WRITE
+        ldr             r2, [r1]             @ DELAY UNTIL WRITTEN
+         
+	/* set CSADRCFG[2] to data flash SRAM mode */
+	ldr             r1, =CSADRCFG2
+	ldr             r2, =0x00320809
+	str             r2, [r1]             @ WRITE
+	ldr             r2, [r1]             @ DELAY UNTIL WRITTEN
+        
+	/* set CSADRCFG[3] to VLIO mode */
+        ldr             r1, =CSADRCFG3
+        ldr             r2, =0x0032080B
+        str             r2, [r1]             @ WRITE
+        ldr             r2, [r1]             @ DELAY UNTIL WRITTEN
+
+	/* set MSC 1 register for VLIO memory */
+        ldr             r1, =MSC1
+        ldr             r2, =0x123C1119
+        str             r2, [r1]             @ WRITE
+        ldr             r2, [r1]             @ DELAY UNTIL WRITTEN
+
+#if 0
+	/* This does not work in Zylonite. -SC */
+	ldr		r0, =0x15fffff0
+	ldr		r1, =0xb10b
+	str		r1, [r0]
+	str		r1, [r0, #4]
+#endif
+
+	/* Configure ACCR Register */
+	ldr		r0, =ACCR		@ ACCR
+	ldr		r1, =0x0180b108
+	str		r1, [r0]
+	ldr		r1, [r0]
+
+	/* Configure MDCNFG Register */
+	ldr		r0, =MDCNFG		@ MDCNFG
+	ldr		r1, =0x403
+	str		r1, [r0]
+	ldr		r1, [r0]
+
+	/* Perform Resistive Compensation by configuring RCOMP register */
+	ldr		r1, =RCOMP		@ RCOMP
+	ldr		r2, =0x000000ff
+	str		r2, [r1]
+	ldr		r2, [r1]
+
+	/* Configure MDMRS Register for SDCS0 */
+	ldr		r1, =MDMRS		@ MDMRS
+	ldr		r2, =0x60000023
+	ldr		r3, [r1]
+	orr		r2, r2, r3
+	str		r2, [r1]
+	ldr		r2, [r1]
+
+	/* Configure MDMRS Register for SDCS1 */
+	ldr		r1, =MDMRS		@ MDMRS
+	ldr		r2, =0xa0000023
+	ldr		r3, [r1]
+	orr		r2, r2, r3
+	str		r2, [r1]
+	ldr		r2, [r1]
+
+	/* Configure MDREFR */
+	ldr		r1, =MDREFR		@ MDREFR
+	ldr		r2, =0x00000006
+	str		r2, [r1]
+	ldr		r2, [r1]
+
+	/* Configure EMPI */
+	ldr		r1, =EMPI		@ EMPI
+	ldr		r2, =0x80000000
+	str		r2, [r1]
+	ldr		r2, [r1]
+
+	/* Hardware DDR Read-Strobe Delay Calibration */
+	ldr             r0, =DDR_HCAL           @ DDR_HCAL
+	ldr             r1, =0x803ffc07     @ the offset is correct? -SC
+	str             r1, [r0]
+	wait		#5
+	ldr             r1, [r0]
+
+	/* Here we assume the hardware calibration alwasy be successful. -SC */
+	/* Set DMCEN bit in MDCNFG Register */
+	ldr		r0, =MDCNFG		@ MDCNFG
+	ldr		r1, [r0]
+	orr		r1, r1, #0x40000000	@ enable SDRAM for Normal Access
+	str		r1, [r0]
+
+	/* scrub/init SDRAM if enabled/present */
+/* 	ldr	r11, =0xa0000000 /\* base address of SDRAM (CFG_DRAM_BASE) *\/ */
+/* 	ldr	r12, =0x04000000 /\* size of memory to scrub (CFG_DRAM_SIZE) *\/ */
+/* 	mov	r8,r12		 /\* save DRAM size (mk: why???) *\/ */
+	ldr	r8, =0xa0000000  /* base address of SDRAM (CFG_DRAM_BASE) */
+	ldr	r9, =0x04000000  /* size of memory to scrub (CFG_DRAM_SIZE) */
+	mov	r0, #0		 /* scrub with 0x0000:0000 */
+	mov	r1, #0
+	mov	r2, #0				
+	mov	r3, #0
+	mov	r4, #0					
+	mov	r5, #0
+	mov	r6, #0					
+	mov	r7, #0
+10:     /* fastScrubLoop */
+	subs	r9, r9, #32	// 32 bytes/line
+	stmia	r8!, {r0-r7}
+	beq	15f
+	b	10b
+
+15:
+	/* Mask all interrupts */
+	mov	r1, #0
+	mcr	p6, 0, r1, c1, c0, 0	@ ICMR
+
+	/* Disable software and data breakpoints */
+	mov	r0, #0
+	mcr	p15,0,r0,c14,c8,0  // ibcr0
+	mcr	p15,0,r0,c14,c9,0  // ibcr1
+	mcr	p15,0,r0,c14,c4,0  // dbcon
+
+	/* Enable all debug functionality */
+	mov	r0,#0x80000000
+	mcr	p14,0,r0,c10,c0,0  // dcsr
+
+
+	
+	/* We are finished with Intel's memory controller initialisation    */
+
+
+	/* ---------------------------------------------------------------- */
+	/* End lowlevel_init                                                     */
+	/* ---------------------------------------------------------------- */
+
+endlowlevel_init:
+
+    mov     pc, lr
+
+
+/*
+@********************************************************************************
+@ DDR calibration
+@  
+@  This function is used to calibrate DQS delay lines.
+@ Monahans supports three ways to do it. One is software 
+@ calibration. Two is hardware calibration. Three is hybrid
+@ calibration.
+@
+@ TBD
+@ -SC
+ddr_calibration:
+
+	@ Case 1:	Write the correct delay value once
+        @ Configure DDR_SCAL Register
+	ldr             r0, =DDR_SCAL           @ DDR_SCAL
+q	ldr             r1, =0xaf2f2f2f
+	str             r1, [r0]
+	ldr             r1, [r0]
+*/
+/*	@ Case 2:	Software Calibration
+	@ Write test pattern to memory
+	ldr		r5, =0x0faf0faf         @ Data Pattern
+	ldr		r4, =0xa0000000		@ DDR ram
+	str		r5, [r4]
+
+	mov		r1, =0x0		@ delay count
+	mov		r6, =0x0
+	mov		r7, =0x0
+ddr_loop1:
+	add		r1, r1, =0x1
+	cmp		r1, =0xf
+	ble		end_loop
+	mov		r3, r1
+	mov             r0, r1, lsl #30
+	orr		r3, r3, r0
+	mov             r0, r1, lsl #22
+	orr		r3, r3, r0
+	mov             r0, r1, lsl #14
+	orr		r3, r3, r0
+	orr		r3, r3, =0x80000000
+	ldr		r2, =DDR_SCAL
+	str		r3, [r2]
+
+	ldr		r2, [r4]
+	cmp		r2, r5
+	bne		ddr_loop1
+	mov		r6, r1
+ddr_loop2:
+	add		r1, r1, =0x1
+	cmp		r1, =0xf
+	ble		end_loop
+        mov             r3, r1
+        mov             r0, r1, lsl #30
+        orr             r3, r3, r0
+        mov             r0, r1, lsl #22
+        orr             r3, r3, r0
+        mov             r0, r1, lsl #14
+        orr             r3, r3, r0
+        orr             r3, r3, =0x80000000
+        ldr             r2, =DDR_SCAL
+        str             r3, [r2]
+
+	ldr		r2, [r4]
+	cmp		r2, r5
+	be		ddr_loop2
+	mov		r7, r2
+
+	add		r3, r6, r7
+	lsr		r3, r3, =0x1
+        mov             r0, r1, lsl #30
+        orr             r3, r3, r0
+        mov             r0, r1, lsl #22
+        orr             r3, r3, r0
+        mov             r0, r1, lsl #14
+        orr             r3, r3, r0
+        orr             r3, r3, =0x80000000
+        ldr             r2, =DDR_SCAL
+	
+end_loop:
+
+	@ Case 3:	Hardware Calibratoin
+	ldr             r0, =DDR_HCAL           @ DDR_HCAL
+	ldr             r1, =0x803ffc07     @ the offset is correct? -SC
+	str             r1, [r0]
+	wait		#5
+	ldr             r1, [r0]
+	mov		pc, lr	
+*/
diff --git a/board/delta/u-boot.lds b/board/delta/u-boot.lds
new file mode 100644
index 0000000000..f0102391b3
--- /dev/null
+++ b/board/delta/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/pxa/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}