diff options
| author | Max Krummenacher <max.krummenacher@toradex.com> | 2019-02-08 18:12:22 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2019-04-13 20:30:08 +0200 |
| commit | 5135db4d8b6def5eda4e47ca3f97b38fd7bc7702 (patch) | |
| tree | c4251fb8b5a7d69bb5b581f90d6f2419a2802b25 /board | |
| parent | 389f61ef44fd032ae5efd3995623842d9281b4c1 (diff) | |
apalis_imx6: revert fuse value set in mfgr_fuse
We have two commands to change the bootmode fuses:
mfgr_fuse which set fuse 0/5 and 0/6
and
updt_fuse which burns bit 4 of 0/5.
Before BSP 2.6 we fused in mfgr_fuse 0x5062, which boots
from the user partition of the eMMC.
To workaround certain hangs we moved to fastboot mode and
using the first bootpartition of the eMMC requiring a fuse
value of 0x5072 which could be achieved by the then added
updt_fuse command. At the same time the mfgr_fuse command
was changed to also fuse 0x5072, revert that second change
so that one can fuse both values, one with just mfgr_fuse
and the later with mfgr_fuse;updt_fuse.
Note that the mfgr_fuse command is only needed at module
production time, a customer might need to use updt_fuse
when upgrading an older module to be compatible with a
newer image. The command is integrated into the image
update scripts.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/toradex/apalis_imx6/do_fuse.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/board/toradex/apalis_imx6/do_fuse.c b/board/toradex/apalis_imx6/do_fuse.c index e6793e366a..22d191f52a 100644 --- a/board/toradex/apalis_imx6/do_fuse.c +++ b/board/toradex/apalis_imx6/do_fuse.c @@ -29,7 +29,7 @@ static int mfgr_fuse(void) return CMD_RET_FAILURE; } /* boot cfg */ - fuse_prog(0, 5, 0x00005072); + fuse_prog(0, 5, 0x00005062); /* BT_FUSE_SEL */ fuse_prog(0, 6, 0x00000010); return CMD_RET_SUCCESS; |