arm: imx8: factor out uart init code

New imx8 boards started adding duplicated UART init code.
Factor out this to common function sc_pm_setup_uart().

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>

4 files changed, 12 insertions, 53 deletions

diff --git a/board/freescale/imx8qm_mek/imx8qm_mek.c b/board/freescale/imx8qm_mek/imx8qm_mek.c
index e69efc4dd6..249c29e0f2 100644
--- a/board/freescale/imx8qm_mek/imx8qm_mek.c
+++ b/board/freescale/imx8qm_mek/imx8qm_mek.c
@@ -34,21 +34,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+	sc_pm_clock_rate_t rate = SC_80MHZ;
 	int ret;
-	/* Set UART0 clock root to 80 MHz */
-	sc_pm_clock_rate_t rate = 80000000;
-
-	/* Power up UART0 */
-	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-	if (ret)
-		return ret;
 
-	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-	if (ret)
-		return ret;
-
-	/* Enable UART0 clock root */
-	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+	/* Set UART0 clock root to 80 MHz */
+	ret = sc_pm_setup_uart(SC_R_UART_0, rate);
 	if (ret)
 		return ret;
 
diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
index 120731422c..82a79033af 100644
--- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
+++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
@@ -40,21 +40,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
+	sc_pm_clock_rate_t rate = SC_80MHZ;
 	int ret;
-	/* Set UART0 clock root to 80 MHz */
-	sc_pm_clock_rate_t rate = 80000000;
-
-	/* Power up UART0 */
-	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0, SC_PM_PW_MODE_ON);
-	if (ret)
-		return ret;
 
-	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
-	if (ret)
-		return ret;
-
-	/* Enable UART0 clock root */
-	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
+	/* Set UART0 clock root to 80 MHz */
+	ret = sc_pm_setup_uart(SC_R_UART_0, rate);
 	if (ret)
 		return ret;
 
diff --git a/board/toradex/apalis-imx8/apalis-imx8.c b/board/toradex/apalis-imx8/apalis-imx8.c
index f516e546a8..4243b0e174 100644
--- a/board/toradex/apalis-imx8/apalis-imx8.c
+++ b/board/toradex/apalis-imx8/apalis-imx8.c
@@ -37,22 +37,11 @@ static void setup_iomux_uart(void)
 
 int board_early_init_f(void)
 {
-	sc_pm_clock_rate_t rate;
+	sc_pm_clock_rate_t rate = SC_80MHZ;
 	sc_err_t err = 0;
 
-	/* Power up UART1 */
-	err = sc_pm_set_resource_power_mode(-1, SC_R_UART_1, SC_PM_PW_MODE_ON);
-	if (err != SC_ERR_NONE)
-		return 0;
-
-	/* Set UART3 clock root to 80 MHz */
-	rate = 80000000;
-	err = sc_pm_set_clock_rate(-1, SC_R_UART_1, SC_PM_CLK_PER, &rate);
-	if (err != SC_ERR_NONE)
-		return 0;
-
-	/* Enable UART1 clock root */
-	err = sc_pm_clock_enable(-1, SC_R_UART_1, SC_PM_CLK_PER, true, false);
+	/* Set UART1 clock root to 80 MHz and enable it */
+	err = sc_pm_setup_uart(SC_R_UART_1, rate);
 	if (err != SC_ERR_NONE)
 		return 0;
 
diff --git a/board/toradex/colibri-imx8x/colibri-imx8x.c b/board/toradex/colibri-imx8x/colibri-imx8x.c
index aa8eaa0ea1..a146148556 100644
--- a/board/toradex/colibri-imx8x/colibri-imx8x.c
+++ b/board/toradex/colibri-imx8x/colibri-imx8x.c
@@ -51,19 +51,9 @@ int board_early_init_f(void)
 	if (err != SC_ERR_NONE)
 		return 0;
 
-	/* Power up UART3 */
-	err = sc_pm_set_resource_power_mode(-1, SC_R_UART_3, SC_PM_PW_MODE_ON);
-	if (err != SC_ERR_NONE)
-		return 0;
-
-	/* Set UART3 clock root to 80 MHz */
-	rate = 80000000;
-	err = sc_pm_set_clock_rate(-1, SC_R_UART_3, SC_PM_CLK_PER, &rate);
-	if (err != SC_ERR_NONE)
-		return 0;
-
-	/* Enable UART3 clock root */
-	err = sc_pm_clock_enable(-1, SC_R_UART_3, SC_PM_CLK_PER, true, false);
+	/* Set UART3 clock root to 80 MHz and enable it */
+	rate = SC_80MHZ;
+	err = sc_pm_setup_uart(SC_R_UART_3, rate);
 	if (err != SC_ERR_NONE)
 		return 0;