diff options
| author | Yangbo Lu <yangbo.lu@nxp.com> | 2017-12-08 15:35:37 +0800 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2017-12-14 13:08:47 -0800 |
| commit | 6aaa539f47fc9305de5af64c02b076136852cc3b (patch) | |
| tree | 1dcdd189cf7abcbd2a8974d45b8ed93fb52a7978 /board | |
| parent | 4a47bf8a2ba61e21b022b81e2234fdb47570ad22 (diff) | |
armv8: ls1012ardb: support hwconfig for eSDHC1 enabling
I2C reading for DIP switch setting is not reliable for LS1012ARDB
RevD and later versions. This patch is to add hwconfig support to
enable/disable eSDHC1 manually for these boards. Also drop 'status'
fix-up for eSDHC0 and leave it as it is. It shouldn't always be
fixed up with 'okay'.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/ls1012ardb/ls1012ardb.c | 55 |
1 files changed, 35 insertions, 20 deletions
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c index 421b0a7861..286f9d8199 100644 --- a/board/freescale/ls1012ardb/ls1012ardb.c +++ b/board/freescale/ls1012ardb/ls1012ardb.c @@ -152,34 +152,49 @@ int board_init(void) int esdhc_status_fixup(void *blob, const char *compat) { - char esdhc0_path[] = "/soc/esdhc@1560000"; char esdhc1_path[] = "/soc/esdhc@1580000"; - u8 io = 0; + bool sdhc2_en = false; u8 mux_sdhc2; - - do_fixup_by_path(blob, esdhc0_path, "status", "okay", - sizeof("okay"), 1); + u8 io = 0; i2c_set_bus_num(0); - /* - * The I2C IO-expander for mux select is used to control the muxing - * of various onboard interfaces. - * - * IO1[3:2] indicates SDHC2 interface demultiplexer select lines. - * 00 - SDIO wifi - * 01 - GPIO (to Arduino) - * 10 - eMMC Memory - * 11 - SPI - */ - if (i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_0, 1, &io, 1) < 0) { + /* IO1[7:3] is the field of board revision info. */ + if (i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_1, 1, &io, 1) < 0) { printf("Error reading i2c boot information!\n"); - return 0; /* Don't want to hang() on this error */ + return 0; + } + + /* hwconfig method is used for RevD and later versions. */ + if ((io & SW_REV_MASK) <= SW_REV_D) { +#ifdef CONFIG_HWCONFIG + if (hwconfig("esdhc1")) + sdhc2_en = true; +#endif + } else { + /* + * The I2C IO-expander for mux select is used to control + * the muxing of various onboard interfaces. + * + * IO0[3:2] indicates SDHC2 interface demultiplexer + * select lines. + * 00 - SDIO wifi + * 01 - GPIO (to Arduino) + * 10 - eMMC Memory + * 11 - SPI + */ + if (i2c_read(I2C_MUX_IO_ADDR, I2C_MUX_IO_0, 1, &io, 1) < 0) { + printf("Error reading i2c boot information!\n"); + return 0; + } + + mux_sdhc2 = (io & 0x0c) >> 2; + /* Enable SDHC2 only when use SDIO wifi and eMMC */ + if (mux_sdhc2 == 2 || mux_sdhc2 == 0) + sdhc2_en = true; } - mux_sdhc2 = (io & 0x0c) >> 2; - /* Enable SDHC2 only when use SDIO wifi and eMMC */ - if (mux_sdhc2 == 2 || mux_sdhc2 == 0) + if (sdhc2_en) do_fixup_by_path(blob, esdhc1_path, "status", "okay", sizeof("okay"), 1); else |