OpenRISC: Remove

The OpenRISC architecture is currently unmaintained, remove.

Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

6 files changed, 0 insertions, 947 deletions

diff --git a/board/openrisc/openrisc-generic/Kconfig b/board/openrisc/openrisc-generic/Kconfig
deleted file mode 100644
index cd2a94f025..0000000000
--- a/board/openrisc/openrisc-generic/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OPENRISC_GENERIC
-
-config SYS_BOARD
-	default "openrisc-generic"
-
-config SYS_VENDOR
-	default "openrisc"
-
-config SYS_CONFIG_NAME
-	default "openrisc-generic"
-
-endif
diff --git a/board/openrisc/openrisc-generic/MAINTAINERS b/board/openrisc/openrisc-generic/MAINTAINERS
deleted file mode 100644
index c8dbc742e2..0000000000
--- a/board/openrisc/openrisc-generic/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-OPENRISC-GENERIC BOARD
-M:	Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-S:	Maintained
-F:	board/openrisc/openrisc-generic/
-F:	include/configs/openrisc-generic.h
-F:	configs/openrisc-generic_defconfig
diff --git a/board/openrisc/openrisc-generic/Makefile b/board/openrisc/openrisc-generic/Makefile
deleted file mode 100644
index 342bc80450..0000000000
--- a/board/openrisc/openrisc-generic/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= openrisc-generic.o
diff --git a/board/openrisc/openrisc-generic/config.mk b/board/openrisc/openrisc-generic/config.mk
deleted file mode 100644
index dd6595f757..0000000000
--- a/board/openrisc/openrisc-generic/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2011, Julius Baxter <julius@opencores.org>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mhard-mul -mhard-div
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/openrisc/openrisc-generic/openrisc-generic.c b/board/openrisc/openrisc-generic/openrisc-generic.c
deleted file mode 100644
index 4f82600bbb..0000000000
--- a/board/openrisc/openrisc-generic/openrisc-generic.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Based on nios2-generic.c:
- * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-
-int board_early_init_f(void)
-{
-	return 0;
-}
-
-int checkboard(void)
-{
-	printf("BOARD: %s\n", CONFIG_BOARD_NAME);
-	return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
-	return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-
-#ifdef CONFIG_ETHOC
-	rc += ethoc_initialize(0, CONFIG_SYS_ETHOC_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/openrisc/openrisc-generic/or1ksim.cfg b/board/openrisc/openrisc-generic/or1ksim.cfg
deleted file mode 100644
index 2bd8642932..0000000000
--- a/board/openrisc/openrisc-generic/or1ksim.cfg
+++ /dev/null
@@ -1,871 +0,0 @@
-/* sim.cfg -- Simulator configuration script file
-   Copyright (C) 2001-2002, Marko Mlinar, markom@opencores.org
-
-This file is part of OpenRISC 1000 Architectural Simulator.
-It contains the default configuration and help about configuring
-the simulator.
-
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-/* INTRODUCTION
-
-   The ork1sim has various parameters, that are set in configuration files
-   like this one. The user can switch between configurations at startup by
-   specifying the required configuration file with the -f <filename.cfg> option.
-   If no configuration file is specified or1ksim searches for the default
-   configuration file sim.cfg. First it searches for './sim.cfg'. If this
-   file is not found, it searches for '~/or1k/sim.cfg'. If this file is
-   not found too, it reverts to the built-in default configuration.
-
-   NOTE: Users should not rely on the built-in configuration, since the
-	 default configuration may differ between version.
-	 Rather create a configuration file that sets all critical values.
-
-   This file may contain (standard C) comments only - no // support.
-
-   Configure files may be be included, using:
-   include "file_name_to_include"
-
-   Like normal configuration files, the included file is divided into
-   sections. Each section is described in detail also.
-
-   Some section have subsections. One example of such a subsection is:
-
-   device <index>
-     instance specific parameters...
-   enddevice
-
-   which creates a device instance.
-*/
-
-
-/* MEMORY SECTION
-
-   This section specifies how the memory is generated and the blocks
-   it consists of.
-
-   type = random/unknown/pattern
-      Specifies the initial memory values.
-      'random' generates random memory using seed 'random_seed'.
-      'pattern' fills memory with 'pattern'.
-      'unknown' does not specify how memory should be generated,
-      leaving the memory in a undefined state. This is the fastest
-      option.
-
-   random_seed = <value>
-      random seed for randomizer, used if type = 'random'.
-
-   pattern = <value>
-      pattern to fill memory, used if type = 'pattern'.
-
-   nmemories = <value>
-      number of memory instances connected
-
-   baseaddr = <hex_value>
-      memory start address
-
-   size = <hex_value>
-      memory size
-
-   name = "<string>"
-      memory block name
-
-   ce = <value>
-      chip enable index of the memory instance
-
-   mc = <value>
-      memory controller this memory is connected to
-
-   delayr = <value>
-      cycles, required for read access, -1 if instance does not support reading
-
-   delayw = <value>
-      cycles, required for write access, -1 if instance does not support writing
-
-   log = "<filename>"
-      filename, where to log memory accesses to, no log, if log command is not specified
-*/
-
-
-section memory
-  pattern = 0x00
-  type = unknown /* Fastest */
-
-  name = "FLASH"
-  ce = 0
-  mc = 0
-  baseaddr = 0xf0000000
-  size = 0x01000000
-  delayr =  1
-  delayw = -1
-end
-
-section memory
-  pattern = 0x00
-  type = unknown /* Fastest */
-
-  name = "RAM"
-  ce = 1
-  mc = 0
-  baseaddr = 0x00000000
-  size = 0x02000000
-  delayr = 1
-  delayw = 1
-end
-
-section memory
-  pattern = 0x00
-  type = unknown /* Fastest */
-
-  name = "SRAM"
-  mc = 0
-  ce = 2
-  baseaddr = 0xa4000000
-  size = 0x00100000
-  delayr = 1
-  delayw = 2
-end
-
-
-/* IMMU SECTION
-
-    This section configures the Instruction Memory Manangement Unit
-
-    enabled = 0/1
-       '0': disabled
-       '1': enabled
-       (NOTE: UPR bit is set)
-
-    nsets = <value>
-       number of ITLB sets; must be power of two
-
-    nways = <value>
-       number of ITLB ways
-
-    pagesize = <value>
-       instruction page size; must be power of two
-
-    entrysize = <value>
-       instruction entry size in bytes
-
-    ustates = <value>
-       number of ITLB usage states (2, 3, 4 etc., max is 4)
-
-    hitdelay = <value>
-       number of cycles immu hit costs
-
-    missdelay = <value>
-       number of cycles immu miss costs
-*/
-
-section immu
-  enabled = 1
-  nsets = 64
-  nways = 1
-  pagesize = 8192
-  hitdelay = 0
-  missdelay = 0
-end
-
-
-/* DMMU SECTION
-
-    This section configures the Data Memory Manangement Unit
-
-    enabled = 0/1
-       '0': disabled
-       '1': enabled
-       (NOTE: UPR bit is set)
-
-    nsets = <value>
-       number of DTLB sets; must be power of two
-
-    nways = <value>
-       number of DTLB ways
-
-    pagesize = <value>
-       data page size; must be power of two
-
-    entrysize = <value>
-       data entry size in bytes
-
-    ustates = <value>
-       number of DTLB usage states (2, 3, 4 etc., max is 4)
-
-    hitdelay = <value>
-       number of cycles dmmu hit costs
-
-    missdelay = <value>
-       number of cycles dmmu miss costs
-*/
-
-section dmmu
-  enabled = 1
-  nsets = 64
-  nways = 1
-  pagesize = 8192
-  hitdelay = 0
-  missdelay = 0
-end
-
-
-/* IC SECTION
-
-   This section configures the Instruction Cache
-
-   enabled = 0/1
-       '0': disabled
-       '1': enabled
-      (NOTE: UPR bit is set)
-
-   nsets = <value>
-      number of IC sets; must be power of two
-
-   nways = <value>
-      number of IC ways
-
-   blocksize = <value>
-      IC block size in bytes; must be power of two
-
-   ustates = <value>
-      number of IC usage states (2, 3, 4 etc., max is 4)
-
-   hitdelay = <value>
-      number of cycles ic hit costs
-
-    missdelay = <value>
-      number of cycles ic miss costs
-*/
-
-section ic
-  enabled = 1
-  nsets = 512
-  nways = 1
-  blocksize = 16
-  hitdelay = 1
-  missdelay = 1
-end
-
-
-/* DC SECTION
-
-   This section configures the Data Cache
-
-   enabled = 0/1
-       '0': disabled
-       '1': enabled
-      (NOTE: UPR bit is set)
-
-   nsets = <value>
-      number of DC sets; must be power of two
-
-   nways = <value>
-      number of DC ways
-
-   blocksize = <value>
-      DC block size in bytes; must be power of two
-
-   ustates = <value>
-      number of DC usage states (2, 3, 4 etc., max is 4)
-
-   load_hitdelay = <value>
-      number of cycles dc load hit costs
-
-   load_missdelay = <value>
-      number of cycles dc load miss costs
-
-   store_hitdelay = <value>
-      number of cycles dc load hit costs
-
-   store_missdelay = <value>
-      number of cycles dc load miss costs
-*/
-
-section dc
-  enabled = 1
-  nsets = 512
-  nways = 1
-  blocksize = 16
-  load_hitdelay = 1
-  load_missdelay = 1
-  store_hitdelay = 1
-  store_missdelay = 1
-end
-
-
-/* SIM SECTION
-
-  This section specifies how or1ksim should behave.
-
-  verbose = 0/1
-       '0': don't print extra messages
-       '1': print extra messages
-
-  debug = 0-9
-      0  : no debug messages
-      1-9: debug message level.
-	   higher numbers produce more messages
-
-  profile = 0/1
-      '0': don't generate profiling file 'sim.profile'
-      '1': don't generate profiling file 'sim.profile'
-
-  prof_fn = "<filename>"
-      optional filename for the profiling file.
-      valid only if 'profile' is set
-
-  mprofile = 0/1
-      '0': don't generate memory profiling file 'sim.mprofile'
-      '1': generate memory profiling file 'sim.mprofile'
-
-  mprof_fn = "<filename>"
-      optional filename for the memory profiling file.
-      valid only if 'mprofile' is set
-
-  history = 0/1
-      '0': don't track execution flow
-      '1': track execution flow
-      Execution flow can be tracked for the simulator's
-      'hist' command. Useful for back-trace debugging.
-
-  iprompt = 0/1
-     '0': start in <not interactive prompt> (so what do we start in ???)
-     '1': start in interactive prompt.
-
-  exe_log = 0/1
-      '0': don't generate execution log.
-      '1': generate execution log.
-
-  exe_log = default/hardware/simple/software
-      type of execution log, default is used when not specified
-
-  exe_log_start = <value>
-      index of first instruction to start logging, default = 0
-
-  exe_log_end = <value>
-      index of last instruction to end logging; not limited, if omitted
-
-  exe_log_marker = <value>
-      <value> specifies number of instructions before horizontal marker is
-      printed; if zero, markers are disabled (default)
-
-  exe_log_fn = "<filename>"
-      filename for the exection log file.
-      valid only if 'exe_log' is set
-
-  clkcycle = <value>[ps|ns|us|ms]
-      specifies time measurement for one cycle
-*/
-
-section sim
-  verbose = 1
-  debug = 0
-  profile = 0
-  history = 0
-
-  clkcycle = 10ns
-end
-
-
-/* SECTION VAPI
-
-    This section configures the Verification API, used for Advanced
-    Core Verification.
-
-    enabled = 0/1
-	'0': disbable VAPI server
-	'1': enable/start VAPI server
-
-    server_port = <value>
-	TCP/IP port to start VAPI server on
-
-    log_enabled = 0/1
-       '0': disable VAPI requests logging
-       '1': enable VAPI requests logging
-
-    hide_device_id = 0/1
-       '0': don't log device id (for compatability with old version)
-       '1': log device id
-
-
-    vapi_fn = <filename>
-       filename for the log file.
-       valid only if log_enabled is set
-*/
-
-section VAPI
-  enabled = 0
-  server_port = 9998
-  log_enabled = 0
-  vapi_log_fn = "vapi.log"
-end
-
-
-/* CPU SECTION
-
-   This section specifies various CPU parameters.
-
-   ver = <value>
-   rev = <value>
-      specifies version and revision of the CPU used
-
-   upr = <value>
-      changes the upr register
-
-   sr = <value>
-      sets the initial Supervision Register value
-      supervisor mode (SM) and fixed one (FO) set = 0x8001
-      exception prefix high (EPH, vectors@0xf0000000) = 0x4000
-      together, (SM | FO | EPH) = 0xc001
-   superscalar = 0/1
-      '0': CPU is scalar
-      '1': CPU is superscalar
-      (modify cpu/or32/execute.c to tune superscalar model)
-
-   hazards = 0/1
-      '0': don't track data hazards in superscalar CPU
-      '1': track data hazards in superscalar CPU
-      If tracked, data hazards can be displayed using the
-      simulator's 'r' command.
-
-   dependstats = 0/1
-      '0': don't calculate inter-instruction dependencies.
-      '1': calculate inter-instruction dependencies.
-      If calculated, inter-instruction dependencies can be
-      displayed using the simulator's 'stat' command.
-
-   sbuf_len = <value>
-      length of store buffer (<= 256), 0 = disabled
-*/
-
-section cpu
-  ver = 0x12
-  cfg = 0x00
-  rev = 0x01
-  sr =  0x8001 /*SPR_SR_FO  | SPR_SR_SM | SPR_SR_EPH */
-  /* upr = */
-  superscalar = 0
-  hazards = 0
-  dependstats = 0
-  sbuf_len = 0
-end
-
-
-/* PM SECTION
-
-   This section specifies Power Management parameters
-
-   enabled = 0/1
-      '0': disable power management
-      '1': enable power management
-*/
-
-section pm
-  enabled = 0
-end
-
-
-/* BPB SECTION
-
-   This section specifies how branch prediction should behave.
-
-   enabled = 0/1
-     '0': disable branch prediction
-     '1': enable branch prediction
-
-   btic = 0/1
-     '0': disable branch target instruction cache model
-     '1': enable branch target instruction cache model
-
-   sbp_bf_fwd = 0/1
-     Static branch prediction for 'l.bf'
-     '0': don't use forward prediction
-     '1': use forward prediction
-
-   sbp_bnf_fwd = 0/1
-     Static branch prediction for 'l.bnf'
-     '0': don't use forward prediction
-     '1': use forward prediction
-
-   hitdelay = <value>
-       number of cycles bpb hit costs
-
-   missdelay = <value>
-       number of cycles bpb miss costs
-*/
-
-section bpb
-  enabled = 0
-  btic = 0
-  sbp_bf_fwd = 0
-  sbp_bnf_fwd = 0
-  hitdelay = 0
-  missdelay = 0
-end
-
-
-/* DEBUG SECTION
-
-   This sections specifies how the debug unit should behave.
-
-   enabled = 0/1
-      '0': disable debug unit
-      '1': enable debug unit
-
-   gdb_enabled = 0/1
-      '0': don't start gdb server
-      '1': start gdb server at port 'server_port'
-
-   server_port = <value>
-      TCP/IP port to start gdb server on
-      valid only if gdb_enabled is set
-
-   vapi_id = <hex_value>
-      Used to create "fake" vapi log file containing the JTAG proxy messages.
-*/
-section debug
-  enabled = 0
-/*  gdb_enabled = 0 */
-/*  server_port = 9999*/
-  rsp_enabled = 1
-  rsp_port = 50001
-end
-
-
-/* MC SECTION
-
-   This section configures the memory controller
-
-   enabled = 0/1
-     '0': disable memory controller
-     '1': enable memory controller
-
-   baseaddr = <hex_value>
-      address of first MC register
-
-   POC = <hex_value>
-      Power On Configuration register
-
-   index = <value>
-      Index of this memory controller amongst all the memory controllers
-*/
-
-section mc
-  enabled = 0
-  baseaddr = 0x93000000
-  POC = 0x00000008                 /* Power on configuration register */
-  index = 0
-end
-
-
-/* UART SECTION
-
-   This section configures the UARTs
-
-     enabled = <0|1>
-	Enable/disable the peripheral.  By default if it is enabled.
-
-     baseaddr = <hex_value>
-	address of first UART register for this device
-
-
-     channel = <channeltype>:<args>
-
-	The channel parameter indicates the source of received UART characters
-	and the sink for transmitted UART characters.
-
-	The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
-	(without quotes).
-
-	  A) To send/receive characters from a pair of files, use a file
-	     channel:
-
-	       channel=file:<rxfile>,<txfile>
-
-	  B) To create an interactive terminal window, use an xterm channel:
-
-	       channel=xterm:[<xterm_arg>]*
-
-	  C) To create a bidirectional tcp socket which one could, for example,
-	     access via telnet, use a tcp channel:
-
-	       channel=tcp:<port number>
-
-	  D) To cause the UART to read/write from existing numeric file
-	     descriptors, use an fd channel:
-
-	       channel=fd:<rx file descriptor num>,<tx file descriptor num>
-
-	  E) To connect the UART to a physical serial port, create a tty
-	     channel:
-
-	       channel=tty:device=/dev/ttyS0,baud=9600
-
-     irq = <value>
-	irq number for this device
-
-     16550 = 0/1
-	'0': this device is a UART16450
-	'1': this device is a UART16550
-
-     jitter = <value>
-	in msecs... time to block, -1 to disable it
-
-     vapi_id = <hex_value>
-	VAPI id of this instance
-*/
-
-section uart
-  enabled = 1
-  baseaddr = 0x90000000
-  irq = 2
-  /* channel = "file:uart0.rx,uart0.tx" */
-  /* channel = "tcp:10084" */
-  channel = "xterm:"
-  jitter = -1                     /* async behaviour */
-  16550 = 1
-end
-
-
-/* DMA SECTION
-
-   This section configures the DMAs
-
-     enabled = <0|1>
-	Enable/disable the peripheral.  By default if it is enabled.
-
-     baseaddr = <hex_value>
-	address of first DMA register for this device
-
-     irq = <value>
-	irq number for this device
-
-     vapi_id = <hex_value>
-	VAPI id of this instance
-*/
-
-section dma
-  enabled = 1
-  baseaddr = 0x9a000000
-  irq = 11
-end
-
-
-/* ETHERNET SECTION
-
-   This section configures the ETHERNETs
-
-     enabled = <0|1>
-	Enable/disable the peripheral.  By default if it is enabled.
-
-     baseaddr = <hex_value>
-	address of first ethernet register for this device
-
-     dma = <value>
-	which controller is this ethernet "connected" to
-
-     irq = <value>
-	ethernet mac IRQ level
-
-     rtx_type = <value>
-	use 0 - file interface, 1 - socket interface
-
-     rx_channel = <value>
-	DMA channel used for RX
-
-     tx_channel = <value>
-	DMA channel used for TX
-
-     rxfile = "<filename>"
-	filename, where to read data from
-
-     txfile = "<filename>"
-	filename, where to write data to
-
-     sockif = "<ifacename>"
-	interface name of ethernet socket
-
-     vapi_id = <hex_value>
-	VAPI id of this instance
-*/
-
-section ethernet
-  enabled = 1
-  baseaddr = 0x92000000
-  /* dma = 0 */
-  irq = 4
-  rtx_type = "tap"
-  tap_dev = "tap0"
-  /* tx_channel = 0 */
-  /* rx_channel = 1 */
-  rxfile = "eth0.rx"
-  txfile = "eth0.tx"
-  sockif = "eth0"
-end
-
-
-/* GPIO SECTION
-
-   This section configures the GPIOs
-
-     enabled = <0|1>
-	Enable/disable the peripheral.  By default if it is enabled.
-
-     baseaddr = <hex_value>
-	address of first GPIO register for this device
-
-     irq = <value>
-	irq number for this device
-
-     base_vapi_id = <hex_value>
-	first VAPI id of this instance
-	GPIO uses 8 consecutive VAPI IDs
-*/
-
-section gpio
-  enabled = 0
-  baseaddr = 0x91000000
-  irq = 3
-  base_vapi_id = 0x0200
-end
-
-/* VGA SECTION
-
-    This section configures the VGA/LCD controller
-
-      enabled = <0|1>
-	Enable/disable the peripheral.  By default if it is enabled.
-
-      baseaddr = <hex_value>
-	address of first VGA register
-
-      irq = <value>
-	irq number for this device
-
-      refresh_rate = <value>
-	number of cycles between screen dumps
-
-      filename = "<filename>"
-	template name for generated names (e.g. "primary" produces "primary0023.bmp")
-*/
-
-section vga
-  enabled = 0
-  baseaddr = 0x97100000
-  irq = 8
-  refresh_rate = 100000
-  filename = "primary"
-end
-
-
-/* TICK TIMER SECTION
-
-    This section configures tick timer
-
-    enabled = 0/1
-      whether tick timer is enabled
-*/
-
-section pic
-  enabled = 1
-  edge_trigger = 1
-end
-
-/* FB SECTION
-
-    This section configures the frame buffer
-
-    enabled = <0|1>
-      Enable/disable the peripheral.  By default if it is enabled.
-
-    baseaddr = <hex_value>
-      base address of frame buffer
-
-    paladdr = <hex_value>
-      base address of first palette entry
-
-    refresh_rate = <value>
-      number of cycles between screen dumps
-
-    filename = "<filename>"
-      template name for generated names (e.g. "primary" produces "primary0023.bmp")
-*/
-
-section fb
-  enabled = 0
-  baseaddr = 0x97000000
-  refresh_rate = 1000000
-  filename = "primary"
-end
-
-
-/* KBD SECTION
-
-    This section configures the PS/2 compatible keyboard
-
-    baseaddr = <hex_value>
-      base address of the keyboard device
-
-    rxfile = "<filename>"
-      filename, where to read data from
-*/
-
-section kbd
-  enabled = 0
-  irq = 5
-  baseaddr = 0x94000000
-  rxfile = "kbd.rx"
-end
-
-
-/* ATA SECTION
-
-    This section configures the ATA/ATAPI host controller
-
-      baseaddr = <hex_value>
-	address of first ATA register
-
-      enabled = <0|1>
-	Enable/disable the peripheral.  By default if it is enabled.
-
-      irq = <value>
-	irq number for this device
-
-      debug = <value>
-	debug level for ata models.
-	0: no debug messages
-	1: verbose messages
-	3: normal messages (more messages than verbose)
-	5: debug messages (normal debug messages)
-	7: flow control messages (debug statemachine flows)
-	9: low priority message (display everything the code does)
-
-      dev_type0/1 = <value>
-	ata device 0 type
-	0: NO_CONNeCT: none (not connected)
-	1: FILE      : simulated harddisk
-	2: LOCAL     : local system harddisk
-
-      dev_file0/1 = "<filename>"
-	filename for simulated ATA device
-	valid only if dev_type0 == 1
-
-      dev_size0/1 = <value>
-	size of simulated hard-disk (in MBytes)
-	valid only if dev_type0 == 1
-
-      dev_packet0/1 = <value>
-	0: simulated ATA device does NOT implement PACKET command feature set
-	1: simulated ATA device does implement PACKET command feature set
-
-   FIXME: irq number
-*/
-
-section ata
-  enabled = 0
-  baseaddr = 0x9e000000
-  irq = 15
-
-end