board: stm32f429-discovery: switch to DM STM32 sdram driver

Use available DM stm32_sdram.c driver instead of board
SDRAM initialization.
For that, enable OF_CONTROL, OF_EMBED and STM32_SDRAM flags.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

1 files changed, 14 insertions, 122 deletions

diff --git a/board/st/stm32f429-discovery/stm32f429-discovery.c b/board/st/stm32f429-discovery/stm32f429-discovery.c
index 1c34a8efe1..7e8df8eaef 100644
--- a/board/st/stm32f429-discovery/stm32f429-discovery.c
+++ b/board/st/stm32f429-discovery/stm32f429-discovery.c
@@ -15,10 +15,8 @@
 #include <dm.h>
 #include <stm32_rcc.h>
 #include <asm/io.h>
-#include <asm/armv7m.h>
 #include <asm/arch/stm32.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/fmc.h>
 #include <dm/platform_data/serial_stm32.h>
 #include <asm/arch/stm32_periph.h>
 #include <asm/arch/stm32_defs.h>
@@ -140,56 +138,10 @@ out:
  */
 #define STM32_RCC_ENR_FMC	(1 << 0)	/* FMC module clock  */
 
-static inline u32 _ns2clk(u32 ns, u32 freq)
-{
-	u32 tmp = freq/1000000;
-	return (tmp * ns) / 1000;
-}
-
-#define NS2CLK(ns) (_ns2clk(ns, freq))
-
-/*
- * Following are timings for IS42S16400J, from corresponding datasheet
- */
-#define SDRAM_CAS	3	/* 3 cycles */
-#define SDRAM_NB	1	/* Number of banks */
-#define SDRAM_MWID	1	/* 16 bit memory */
-
-#define SDRAM_NR	0x1	/* 12-bit row */
-#define SDRAM_NC	0x0	/* 8-bit col */
-#define SDRAM_RBURST	0x1	/* Single read requests always as bursts */
-#define SDRAM_RPIPE	0x0	/* No HCLK clock cycle delay */
-
-#define SDRAM_TRRD	(NS2CLK(14) - 1)
-#define SDRAM_TRCD	(NS2CLK(15) - 1)
-#define SDRAM_TRP	(NS2CLK(15) - 1)
-#define SDRAM_TRAS	(NS2CLK(42) - 1)
-#define SDRAM_TRC	(NS2CLK(63) - 1)
-#define SDRAM_TRFC	(NS2CLK(63) - 1)
-#define SDRAM_TCDL	(1 - 1)
-#define SDRAM_TRDL	(2 - 1)
-#define SDRAM_TBDL	(1 - 1)
-#define SDRAM_TREF	1386
-#define SDRAM_TCCD	(1 - 1)
-
-#define SDRAM_TXSR	(NS2CLK(70) - 1)/* Row cycle time after precharge */
-#define SDRAM_TMRD	(3 - 1)		/* Page 10, Mode Register Set */
-
-/* Last data-in to row precharge, need also comply ineq from RM 37.7.5 */
-#define SDRAM_TWR	max(\
-	(int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD - 1)), \
-	(int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP - 2)\
-)
-
-#define SDRAM_MODE_BL_SHIFT	0
-#define SDRAM_MODE_CAS_SHIFT	4
-#define SDRAM_MODE_BL		0
-#define SDRAM_MODE_CAS		SDRAM_CAS
-
 int dram_init(void)
 {
-	u32 freq;
 	int rv;
+	struct udevice *dev;
 
 	rv = fmc_setup_gpio();
 	if (rv)
@@ -197,83 +149,23 @@ int dram_init(void)
 
 	setbits_le32(&STM32_RCC->ahb3enr, STM32_RCC_ENR_FMC);
 
-	/*
-	 * Get frequency for NS2CLK calculation.
-	 */
-	freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
-
-	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
-		| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
-		| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
-		&STM32_SDRAM_FMC->sdcr1);
-
-	writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
-		| SDRAM_CAS << FMC_SDCR_CAS_SHIFT
-		| SDRAM_NB << FMC_SDCR_NB_SHIFT
-		| SDRAM_MWID << FMC_SDCR_MWID_SHIFT
-		| SDRAM_NR << FMC_SDCR_NR_SHIFT
-		| SDRAM_NC << FMC_SDCR_NC_SHIFT
-		| SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
-		| SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
-		&STM32_SDRAM_FMC->sdcr2);
-
-	writel(SDRAM_TRP << FMC_SDTR_TRP_SHIFT
-		| SDRAM_TRC << FMC_SDTR_TRC_SHIFT,
-		&STM32_SDRAM_FMC->sdtr1);
-
-	writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
-		| SDRAM_TRP << FMC_SDTR_TRP_SHIFT
-		| SDRAM_TWR << FMC_SDTR_TWR_SHIFT
-		| SDRAM_TRC << FMC_SDTR_TRC_SHIFT
-		| SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
-		| SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
-		| SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
-		&STM32_SDRAM_FMC->sdtr2);
-
-	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_START_CLOCK,
-	       &STM32_SDRAM_FMC->sdcmr);
-
-	udelay(200);	/* 200 us delay, page 10, "Power-Up" */
-	FMC_BUSY_WAIT();
-
-	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_PRECHARGE,
-	       &STM32_SDRAM_FMC->sdcmr);
-
-	udelay(100);
-	FMC_BUSY_WAIT();
-
-	writel((FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_AUTOREFRESH
-		| 7 << FMC_SDCMR_NRFS_SHIFT), &STM32_SDRAM_FMC->sdcmr);
-
-	udelay(100);
-	FMC_BUSY_WAIT();
-
-	writel(FMC_SDCMR_BANK_2 | (SDRAM_MODE_BL << SDRAM_MODE_BL_SHIFT
-		| SDRAM_MODE_CAS << SDRAM_MODE_CAS_SHIFT)
-		<< FMC_SDCMR_MODE_REGISTER_SHIFT | FMC_SDCMR_MODE_WRITE_MODE,
-		&STM32_SDRAM_FMC->sdcmr);
-
-	udelay(100);
-
-	FMC_BUSY_WAIT();
-
-	writel(FMC_SDCMR_BANK_2 | FMC_SDCMR_MODE_NORMAL,
-	       &STM32_SDRAM_FMC->sdcmr);
-
-	FMC_BUSY_WAIT();
+	rv = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (rv) {
+		debug("DRAM init failed: %d\n", rv);
+		return rv;
+	}
 
-	/* Refresh timer */
-	writel(SDRAM_TREF, &STM32_SDRAM_FMC->sdrtr);
+	if (fdtdec_setup_memory_size() != 0)
+		rv = -EINVAL;
 
-	/*
-	 * Fill in global info with description of SRAM configuration
-	 */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
-	gd->bd->bi_dram[0].size  = CONFIG_SYS_RAM_SIZE;
+	return rv;
+}
 
-	gd->ram_size = CONFIG_SYS_RAM_SIZE;
+int dram_init_banksize(void)
+{
+	fdtdec_setup_memory_banksize();
 
-	return rv;
+	return 0;
 }
 
 static const struct stm32_serial_platdata serial_platdata = {