summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorStefano Babic <sbabic@denx.de>2011-10-06 11:44:26 +0200
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-10-27 21:56:31 +0200
commit9c38f7dfeb3543a35a250fff744d5039badb941b (patch)
treee421cda009ca08e3055b411cc05049a6b97b09b3 /board
parentf33bd087c6a6b833236cb2f327cab39fe218c38c (diff)
MX5: efikamx/efikasb: use new pmic driver
Switch to new pmic generic driver. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
Diffstat (limited to 'board')
-rw-r--r--board/efikamx/efikamx.c51
1 files changed, 28 insertions, 23 deletions
diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c
index 0c4e24bb4c..b78bf6ccba 100644
--- a/board/efikamx/efikamx.c
+++ b/board/efikamx/efikamx.c
@@ -34,6 +34,7 @@
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
+#include <pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
@@ -205,34 +206,38 @@ static void power_init(void)
{
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+ struct pmic *p;
+
+ pmic_init();
+ p = get_pmic();
/* Write needed to Power Gate 2 register */
- val = pmic_reg_read(REG_POWER_MISC);
+ pmic_reg_read(p, REG_POWER_MISC, &val);
val &= ~PWGT2SPIEN;
- pmic_reg_write(REG_POWER_MISC, val);
+ pmic_reg_write(p, REG_POWER_MISC, val);
/* Externally powered */
- val = pmic_reg_read(REG_CHARGE);
+ pmic_reg_read(p, REG_CHARGE, &val);
val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
- pmic_reg_write(REG_CHARGE, val);
+ pmic_reg_write(p, REG_CHARGE, val);
/* power up the system first */
- pmic_reg_write(REG_POWER_MISC, PWUP);
+ pmic_reg_write(p, REG_POWER_MISC, PWUP);
/* Set core voltage to 1.1V */
- val = pmic_reg_read(REG_SW_0);
+ pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
- pmic_reg_write(REG_SW_0, val);
+ pmic_reg_write(p, REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
- val = pmic_reg_read(REG_SW_1);
+ pmic_reg_read(p, REG_SW_1, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
- pmic_reg_write(REG_SW_1, val);
+ pmic_reg_write(p, REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.25 */
- val = pmic_reg_read(REG_SW_2);
+ pmic_reg_read(p, REG_SW_2, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
- pmic_reg_write(REG_SW_2, val);
+ pmic_reg_write(p, REG_SW_2, val);
udelay(50);
/* Raise the core frequency to 800MHz */
@@ -240,46 +245,46 @@ static void power_init(void)
/* Set switchers in Auto in NORMAL mode & STANDBY mode */
/* Setup the switcher mode for SW1 & SW2*/
- val = pmic_reg_read(REG_SW_4);
+ pmic_reg_read(p, REG_SW_4, &val);
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
(SWMODE_MASK << SWMODE2_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
- pmic_reg_write(REG_SW_4, val);
+ pmic_reg_write(p, REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
- val = pmic_reg_read(REG_SW_5);
+ pmic_reg_read(p, REG_SW_5, &val);
val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
(SWMODE_MASK << SWMODE4_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
- pmic_reg_write(REG_SW_5, val);
+ pmic_reg_write(p, REG_SW_5, val);
/* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
- val = pmic_reg_read(REG_SETTING_0);
+ pmic_reg_read(p, REG_SETTING_0, &val);
val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
- pmic_reg_write(REG_SETTING_0, val);
+ pmic_reg_write(p, REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
- val = pmic_reg_read(REG_SETTING_1);
+ pmic_reg_read(p, REG_SETTING_1, &val);
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
- pmic_reg_write(REG_SETTING_1, val);
+ pmic_reg_write(p, REG_SETTING_1, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = VGEN3CONFIG | VCAMCONFIG;
- pmic_reg_write(REG_MODE_1, val);
+ pmic_reg_write(p, REG_MODE_1, val);
udelay(200);
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
VVIDEOEN | VAUDIOEN | VSDEN;
- pmic_reg_write(REG_MODE_1, val);
+ pmic_reg_write(p, REG_MODE_1, val);
- val = pmic_reg_read(REG_POWER_CTL2);
+ pmic_reg_read(p, REG_POWER_CTL2, &val);
val |= WDIRESET;
- pmic_reg_write(REG_POWER_CTL2, val);
+ pmic_reg_write(p, REG_POWER_CTL2, val);
udelay(2500);
}