diff options
author | Stefan Roese <sr@denx.de> | 2009-10-29 15:04:35 +0100 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2009-11-09 11:26:57 +0100 |
commit | b0b867462c569e7accd6f78c942cbab028116ecf (patch) | |
tree | 28ff468681f1689d4abf7478eae575d748d04bfa /board | |
parent | 2cd95a25cb0ee8218b271d23d64fb3f719ac5390 (diff) |
ppc4xx: Consolidate 4xx PCIe board specific configuration
This patch consolidates the PPC4xx board specific PCIe configuration
code. This way the duplicated code is removed. Boards can implement a
special, non standard behaviour (e.g. number of PCIe slots, etc) by
overriding the weak default functions.
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board')
-rw-r--r-- | board/amcc/canyonlands/canyonlands.c | 74 | ||||
-rw-r--r-- | board/amcc/katmai/katmai.c | 74 | ||||
-rw-r--r-- | board/amcc/kilauea/kilauea.c | 77 | ||||
-rw-r--r-- | board/amcc/makalu/makalu.c | 67 | ||||
-rw-r--r-- | board/amcc/yucca/yucca.c | 191 |
5 files changed, 41 insertions, 442 deletions
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 91fae1917d..8ce6788d43 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -383,84 +383,16 @@ int is_pci_host(struct pci_controller *hose) return (1); } -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) +int board_pcie_first(void) { - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; - int start; - - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - /* * Canyonlands with SATA enabled has only one PCIe slot * (2nd one). */ if (gd->board_type == BOARD_CANYONLANDS_SATA) - start = 1; - else - start = 0; - - for (i = start; i <= 1; i++) { + return 1; - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } + return 0; } #endif /* CONFIG_PCI */ diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 908f1a5953..34ecd994d2 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -351,7 +351,7 @@ int is_pci_host(struct pci_controller *hose) return 1; } -static int katmai_pcie_card_present(int port) +int board_pcie_card_present(int port) { u32 val; @@ -367,78 +367,6 @@ static int katmai_pcie_card_present(int port) return 0; } } - -static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; - - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - for (i = 0; i <= 2; i++) { - /* Check for katmai card presence */ - if (!katmai_pcie_card_present(i)) - continue; - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} #endif /* defined(CONFIG_PCI) */ #ifdef CONFIG_POST diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index 5cd822a7fa..c4f8a64965 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -252,15 +252,19 @@ int board_emac_count(void) return 2; } -static int board_pcie_count(void) +/* + * Override the weak default implementation and return the + * last PCIe slot number (max number - 1). + */ +int board_pcie_last(void) { /* * 405EXr only has one EMAC interface, 405EX has two */ if (is_405exr()) - return 1; + return 1 - 1; else - return 2; + return 2 - 1; } int checkboard (void) @@ -300,73 +304,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -#ifdef CONFIG_PCI -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - bus = busno; - char *env; - unsigned int delay; - - for (i = 0; i < board_pcie_count(); i++) { - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} -#endif - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index d4277dda99..43b9bc6bac 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -256,73 +256,6 @@ int pci_pre_init(struct pci_controller * hose ) } #endif /* defined(CONFIG_PCI) */ -#ifdef CONFIG_PCI -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - bus = busno; - char *env; - unsigned int delay; - - for (i = 0; i < 2; i++) { - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} -#endif - #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index d8f4bcbb17..649315581a 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -679,7 +679,7 @@ int is_pci_host(struct pci_controller *hose) return 1; } -static int yucca_pcie_card_present(int port) +int board_pcie_card_present(int port) { u16 reg; @@ -697,185 +697,54 @@ static int yucca_pcie_card_present(int port) } /* - * For the given slot, set rootpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * and turn off reset. - */ -void yucca_setup_pcie_fpga_rootpoint(int port) -{ - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; - - switch(port) { - case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; - break; - case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; - break; - case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; - break; - - default: - return; - } - - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); - - out_be16((u16 *)FPGA_REG1C, - ~(endpoint | reset_off) & - (rootpoint | in_be16((u16 *)FPGA_REG1C))); - /* - * Leave device in reset for a while after powering on the - * slot to give it a chance to initialize. - */ - udelay(250 * 1000); - - out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C)); -} -/* * For the given slot, set endpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * .In end point mode reset bit is read only. + * turn on the green LED and turn off the yellow LED, enable the + * clock. In end point mode reset bit is read only. */ -void yucca_setup_pcie_fpga_endpoint(int port) +void board_pcie_setup_port(int port, int rootpoint) { - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + u16 power, clock, green_led, yellow_led, + reset_off, rp, ep; - switch(port) { + switch (port) { case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; + rp = FPGA_REG1C_PE0_ROOTPOINT; + ep = 0; break; case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; + rp = 0; + ep = FPGA_REG1C_PE1_ENDPOINT; break; case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; + rp = 0; + ep = FPGA_REG1C_PE2_ENDPOINT; break; default: return; } - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); + power = FPGA_REG1A_PWRON_ENCODE(port); + green_led = FPGA_REG1A_GLED_ENCODE(port); + clock = FPGA_REG1A_REFCLK_ENCODE(port); + yellow_led = FPGA_REG1A_YLED_ENCODE(port); + reset_off = FPGA_REG1C_PERST_ENCODE(port); - out_be16((u16 *)FPGA_REG1C, - ~(rootpoint | reset_off) & - (endpoint | in_be16((u16 *)FPGA_REG1C))); -} + out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) & + (yellow_led | in_be16((u16 *)FPGA_REG1A))); -static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; + out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) & + (rp | in_be16((u16 *)FPGA_REG1C))); -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; + if (rootpoint) { + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + udelay(250 * 1000); - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - for (i = 0; i <= 2; i++) { - /* Check for yucca card presence */ - if (!yucca_pcie_card_present(i)) - continue; - - if (is_end_point(i)) { - yucca_setup_pcie_fpga_endpoint(i); - ret = ppc4xx_init_pcie_endport(i); - } else { - yucca_setup_pcie_fpga_rootpoint(i); - ret = ppc4xx_init_pcie_rootport(i); - } - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } + out_be16((u16 *)FPGA_REG1C, + reset_off | in_be16((u16 *)FPGA_REG1C)); } } #endif /* defined(CONFIG_PCI) */ |