dm: i2c: tegra: Convert to driver model

This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:

   - CONFIG_SYS_I2C_INIT_BOARD
   - CONFIG_I2C_MULTI_BUS
   - CONFIG_SYS_MAX_I2C_BUS
   - CONFIG_SYS_I2C_SPEED
   - CONFIG_SYS_I2C

This has been tested on:
- trimslice (no I2C)
- beaver
- Jetson-TK1

It has not been tested on Tegra 114 as I don't have that board.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>

6 files changed, 60 insertions, 38 deletions

diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
index 5870b95afb..86a0844273 100644
--- a/board/avionic-design/common/tamonten-ng.c
+++ b/board/avionic-design/common/tamonten-ng.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/gp_padctrl.h>
 #include <asm/arch/gpio.h>
@@ -51,8 +52,15 @@ void gpio_early_init(void)
 
 void pmu_write(uchar reg, uchar data)
 {
-	i2c_set_bus_num(4);	/* PMU is on bus 4 */
-	i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1);
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev);
+	if (ret) {
+		debug("%s: Cannot find PMIC I2C chip\n", __func__);
+		return;
+	}
+	i2c_write(dev, reg, &data, 1);
 }
 
 /*
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index cc0e5e130f..026f45c6c6 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/gp_padctrl.h>
 #include "pinmux-config-cardhu.h"
@@ -37,17 +38,23 @@ void pinmux_init(void)
  */
 void board_sdmmc_voltage_init(void)
 {
+	struct udevice *dev;
 	uchar reg, data_buffer[1];
+	int ret;
 	int i;
 
-	i2c_set_bus_num(0);	/* PMU is on bus 0 */
+	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+	if (ret) {
+		debug("%s: Cannot find PMIC I2C chip\n", __func__);
+		return;
+	}
 
 	/* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
 	data_buffer[0] = 0x65;
 	reg = 0x32;
 
 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+		if (i2c_write(dev, reg, data_buffer, 1))
 			udelay(100);
 	}
 
@@ -56,7 +63,7 @@ void board_sdmmc_voltage_init(void)
 	reg = 0x67;
 
 	for (i = 0; i < MAX_I2C_RETRY; ++i) {
-		if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+		if (i2c_write(dev, reg, data_buffer, 1))
 			udelay(100);
 	}
 }
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 0e4a65ad05..4bdbf0194a 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -113,10 +113,6 @@ int board_init(void)
 	power_det_init();
 
 #ifdef CONFIG_SYS_I2C_TEGRA
-#ifndef CONFIG_SYS_I2C_INIT_BOARD
-#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
-#endif
-	i2c_init_board();
 # ifdef CONFIG_TEGRA_PMU
 	if (pmu_set_nominal())
 		debug("Failed to select nominal voltages\n");
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index f2d05afac7..2a737468dd 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -15,6 +15,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/gp_padctrl.h>
 #include "pinmux-config-dalmore.h"
@@ -50,18 +51,21 @@ void pinmux_init(void)
  */
 void board_sdmmc_voltage_init(void)
 {
+	struct udevice *dev;
 	uchar reg, data_buffer[1];
 	int ret;
 
-	ret = i2c_set_bus_num(0);/* PMU is on bus 0 */
-	if (ret)
-		printf("%s: i2c_set_bus_num returned %d\n", __func__, ret);
+	ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+	if (ret) {
+		debug("%s: Cannot find PMIC I2C chip\n", __func__);
+		return;
+	}
 
 	/* TPS65913: LDO9_VOLTAGE = 3.3V */
 	data_buffer[0] = 0x31;
 	reg = 0x61;
 
-	ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+	ret = i2c_write(dev, reg, data_buffer, 1);
 	if (ret)
 		printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
 			__func__, reg, data_buffer[0], ret);
@@ -70,7 +74,7 @@ void board_sdmmc_voltage_init(void)
 	data_buffer[0] = 0x01;
 	reg = 0x60;
 
-	ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+	ret = i2c_write(dev, reg, data_buffer, 1);
 	if (ret)
 		printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
 			__func__, reg, data_buffer[0], ret);
@@ -79,7 +83,12 @@ void board_sdmmc_voltage_init(void)
 	data_buffer[0] = 0x03;
 	reg = 0x14;
 
-	ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1);
+	ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev);
+	if (ret) {
+		debug("%s: Cannot find charger I2C chip\n", __func__);
+		return;
+	}
+	ret = i2c_write(dev, reg, data_buffer, 1);
 	if (ret)
 		printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
 			__func__, reg, data_buffer[0], ret);
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 3e9d3d9f10..3114b20be0 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -6,6 +6,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <asm/io.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch/clock.h>
@@ -21,23 +22,26 @@
  */
 void pin_mux_mmc(void)
 {
+	struct udevice *dev;
 	uchar val;
 	int ret;
 
 	/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
-	ret = i2c_set_bus_num(0);
-	if (ret)
-		printf("i2c_set_bus_num failed: %d\n", ret);
+	ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
+	if (ret) {
+		printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
+		return;
+	}
 	val = 0x29;
-	ret = i2c_write(0x3c, 0x46, 1, &val, 1);
+	ret = i2c_write(dev, 0x46, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
 	val = 0x00;
-	ret = i2c_write(0x3c, 0x45, 1, &val, 1);
+	ret = i2c_write(dev, 0x45, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
 	val = 0x1f;
-	ret = i2c_write(0x3c, 0x44, 1, &val, 1);
+	ret = i2c_write(dev, 0x44, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
 
@@ -49,6 +53,7 @@ void pin_mux_mmc(void)
 /* this is a weak define that we are overriding */
 void pin_mux_usb(void)
 {
+	struct udevice *dev;
 	uchar val;
 	int ret;
 
@@ -59,15 +64,17 @@ void pin_mux_usb(void)
 	 */
 
 	/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
-	ret = i2c_set_bus_num(0);
-	if (ret)
-		printf("i2c_set_bus_num failed: %d\n", ret);
+	ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
+	if (ret) {
+		printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
+		return;
+	}
 	val = 0x03;
-	ret = i2c_write(0x20, 2, 1, &val, 1);
+	ret = i2c_write(dev, 2, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x20 2 failed: %d\n", ret);
 	val = 0xfc;
-	ret = i2c_write(0x20, 6, 1, &val, 1);
+	ret = i2c_write(dev, 6, &val, 1);
 	if (ret)
 		printf("i2c_write 0 0x20 6 failed: %d\n", ret);
 }
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index b9d694a268..5d2c024e89 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -6,7 +6,7 @@
  */
 
 #include <common.h>
-
+#include <dm.h>
 #include <asm/arch/gp_padctrl.h>
 #include <asm/arch/pinmux.h>
 #include <asm/gpio.h>
@@ -38,23 +38,20 @@ void pinmux_init(void)
 #ifdef CONFIG_PCI_TEGRA
 int tegra_pcie_board_init(void)
 {
-	unsigned int old_bus;
+	struct udevice *dev;
 	u8 addr, data[1];
 	int err;
 
-	old_bus = i2c_get_bus_num();
-
-	err = i2c_set_bus_num(0);
+	err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
 	if (err) {
-		debug("failed to set I2C bus\n");
+		debug("%s: Cannot find PMIC I2C chip\n", __func__);
 		return err;
 	}
-
 	/* TPS659110: VDD2_OP_REG = 1.05V */
 	data[0] = 0x27;
 	addr = 0x25;
 
-	err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+	err = i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to set VDD supply\n");
 		return err;
@@ -64,7 +61,7 @@ int tegra_pcie_board_init(void)
 	data[0] = 0x0D;
 	addr = 0x24;
 
-	err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+	err = i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to enable VDD supply\n");
 		return err;
@@ -74,14 +71,12 @@ int tegra_pcie_board_init(void)
 	data[0] = 0x0D;
 	addr = 0x35;
 
-	err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+	err = i2c_write(dev, addr, data, 1);
 	if (err) {
 		debug("failed to set AVDD supply\n");
 		return err;
 	}
 
-	i2c_set_bus_num(old_bus);
-
 	return 0;
 }