diff options
author | Nishanth Menon <nm@ti.com> | 2013-03-26 05:20:50 +0000 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-05-10 08:25:54 -0400 |
commit | b29c2f0c142fdb8ef50deae1cc7c4338952fba6c (patch) | |
tree | 18c1e5243a86295c277a88b79cd96c36546694d0 /board | |
parent | 0208aaf6c2e0f346e8410c0e5adb0ea784f00829 (diff) |
twl4030: make twl4030_i2c_read_u8 prototype consistent
u-boot standard i2c read prototype is
i2c_read(addr, reg, 1, &buf, 1)
twl4030_i2c_read_u8(u8 addr, u8 *val, u8 reg)
does not provide consistency, so switch the prototype to be
consistent with rest of u-boot i2c operations:
twl4030_i2c_read_u8(u8 addr, u8 reg, u8 *val)
Signed-off-by: Nishanth Menon <nm@ti.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/cm_t35/cm_t35.c | 4 | ||||
-rw-r--r-- | board/nokia/rx51/rx51.c | 16 |
2 files changed, 10 insertions, 10 deletions
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index 87d73546a2..85286809d3 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -448,7 +448,7 @@ int board_mmc_getcd(struct mmc *mmc) { u8 val; - if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO)) + if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO, &val)) return -1; return !(val & 1); @@ -597,7 +597,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) udelay(1000); offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1; - twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, offset); + twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val); /* Set GPIO6 and GPIO7 of TPS65930 as output */ val |= 0xC0; twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, val); diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index 860d52da3f..42bf8b669d 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -406,8 +406,8 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_DEV_GRP_P1); /* store I2C access state */ - twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state, - TWL4030_PM_MASTER_PB_CFG); + twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG, + &state); /* enable I2C access to powerbus (needed for twl4030 regulator) */ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG, @@ -475,8 +475,8 @@ void hw_watchdog_reset(void) return; /* read actual watchdog timeout */ - twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout, - TWL4030_PM_RECEIVER_WATCHDOG_CFG); + twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_WATCHDOG_CFG, &timeout); /* timeout 0 means watchdog is disabled */ /* reset watchdog timeout to 31s (maximum) */ @@ -531,8 +531,8 @@ int rx51_kp_init(void) { int ret = 0; u8 ctrl; - ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl, - TWL4030_KEYPAD_KEYP_CTRL_REG); + ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_CTRL_REG, &ctrl); if (ret) return ret; @@ -615,8 +615,8 @@ int rx51_kp_tstc(void) for (i = 0; i < 2; i++) { /* check interrupt register for events */ - twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr, - TWL4030_KEYPAD_KEYP_ISR1+(2*i)); + twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_ISR1 + (2 * i), &intr); /* no event */ if (!(intr&1)) |