mpc83xx: Consolidate the ECC support of 83xx

Remove the duplicated source code of ecc command on the <board>.c,
for reused, move these code to cpu/mpc83xx directory.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

2 files changed, 0 insertions, 705 deletions

diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c
index 071591ed83..521d1bbd4e 100644
--- a/board/mpc8349emds/mpc8349emds.c
+++ b/board/mpc8349emds/mpc8349emds.c
@@ -29,7 +29,6 @@
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
-#include <command.h>
 #if defined(CONFIG_SPD_EEPROM)
 #include <spd_sdram.h>
 #endif
@@ -258,332 +257,6 @@ void sdram_init(void)
 }
 #endif
 
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-
-	printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-	/* Interrupts */
-	printf("Memory Error Interrupt Enable:\n");
-	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-	printf("  Single-Bit Error Interrupt Enable: %d\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-	printf("  Memory Select Error Interrupt Enable: %d\n\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-	/* Error disable */
-	printf("Memory Error Disable:\n");
-	printf("  Multiple-Bit Error Disable: %d\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-	printf("  Sinle-Bit Error Disable: %d\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-	printf("  Memory Select Error Disable: %d\n\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-	/* Error injection */
-	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-			ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-	printf("Memory Data Path Error Injection Mask ECC:\n");
-	printf("  ECC Mirror Byte: %d\n",
-			(ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-	printf("  ECC Injection Enable: %d\n",
-			(ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-	printf("  ECC Error Injection Mask: 0x%02x\n\n",
-			ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-	/* SBE counter/threshold */
-	printf("Memory Single-Bit Error Management (0..255):\n");
-	printf("  Single-Bit Error Threshold: %d\n",
-			(ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-	printf("  Single-Bit Error Counter: %d\n\n",
-			(ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-	/* Error detect */
-	printf("Memory Error Detect:\n");
-	printf("  Multiple Memory Errors: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-	printf("  Multiple-Bit Error: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-	printf("  Single-Bit Error: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-	printf("  Memory Select Error: %d\n\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-	/* Capture data */
-	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-			ddr->capture_data_hi, ddr->capture_data_lo);
-	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-		ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-	printf("Memory Error Attributes Capture:\n");
-	printf("  Data Beat Number: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
-	printf("  Transaction Size: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
-	printf("  Transaction Source: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
-	printf("  Transaction Type: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
-	printf("  Error Information Valid: %d\n\n",
-			ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile u32 val;
-	u64 *addr, count, val64;
-	register u64 *i;
-
-	if (argc > 4) {
-		printf ("Usage:\n%s\n", cmdtp->usage);
-		return 1;
-	}
-
-	if (argc == 2) {
-		if (strcmp(argv[1], "status") == 0) {
-			ecc_print_status();
-			return 0;
-		} else if (strcmp(argv[1], "captureclear") == 0) {
-			ddr->capture_address = 0;
-			ddr->capture_data_hi = 0;
-			ddr->capture_data_lo = 0;
-			ddr->capture_ecc = 0;
-			ddr->capture_attributes = 0;
-			return 0;
-		}
-	}
-
-	if (argc == 3) {
-		if (strcmp(argv[1], "sbecnt") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "sbethr") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "errdisable") == 0) {
-			val = ddr->err_disable;
-
-			if (strcmp(argv[2], "+sbe") == 0) {
-				val |= ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "+mbe") == 0) {
-				val |= ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "+mse") == 0) {
-				val |= ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "+all") == 0) {
-				val |= (ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else if (strcmp(argv[2], "-sbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "-mbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "-mse") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "-all") == 0) {
-				val &= ~(ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else {
-				printf("Incorrect err_disable field\n");
-				return 1;
-			}
-
-			ddr->err_disable = val;
-			__asm__ __volatile__ ("sync");
-			__asm__ __volatile__ ("isync");
-			return 0;
-		} else if (strcmp(argv[1], "errdetectclr") == 0) {
-			val = ddr->err_detect;
-
-			if (strcmp(argv[2], "mme") == 0) {
-				val |= ECC_ERROR_DETECT_MME;
-			} else if (strcmp(argv[2], "sbe") == 0) {
-				val |= ECC_ERROR_DETECT_SBE;
-			} else if (strcmp(argv[2], "mbe") == 0) {
-				val |= ECC_ERROR_DETECT_MBE;
-			} else if (strcmp(argv[2], "mse") == 0) {
-				val |= ECC_ERROR_DETECT_MSE;
-			} else if (strcmp(argv[2], "all") == 0) {
-				val |= (ECC_ERROR_DETECT_MME |
-					ECC_ERROR_DETECT_MBE |
-					ECC_ERROR_DETECT_SBE |
-					ECC_ERROR_DETECT_MSE);
-			} else {
-				printf("Incorrect err_detect field\n");
-				return 1;
-			}
-
-			ddr->err_detect = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatahi") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_hi = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatalo") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_lo = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectecc") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-			if (val > 0xff) {
-				printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
-				return 1;
-			}
-			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		} else if (strcmp(argv[1], "inject") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EIEN;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EIEN;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			__asm__ __volatile__ ("sync");
-			__asm__ __volatile__ ("isync");
-			return 0;
-		} else if (strcmp(argv[1], "mirror") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EMB;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EMB;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		}
-	}
-
-	if (argc == 4) {
-		if (strcmp(argv[1], "test") == 0) {
-			addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32)addr % 8) {
-				printf("Address not alligned on double word boundary\n");
-				return 1;
-			}
-
-			disable_interrupts();
-			icache_disable();
-
-			for (i = addr; i < addr + count; i++) {
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* write memory location injecting errors */
-				*i = 0x1122334455667788ULL;
-				__asm__ __volatile__ ("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* read data, this generates ECC error */
-				val64 = *i;
-				__asm__ __volatile__ ("sync");
-
-				/* disable errors for ECC */
-				ddr->err_disable |= ~ECC_ERROR_ENABLE;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* re-initialize memory, write the location again
-				 * NOT injecting errors this time */
-				*i = 0xcafecafecafecafeULL;
-				__asm__ __volatile__ ("sync");
-
-				/* enable errors for ECC */
-				ddr->err_disable &= ECC_ERROR_ENABLE;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-			}
-
-			icache_enable();
-			enable_interrupts();
-
-			return 0;
-		}
-	}
-
-	printf ("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(
-	ecc,     4,     0,      do_ecc,
-	"ecc     - support for DDR ECC features\n",
-	"status              - print out status info\n"
-	"ecc captureclear        - clear capture regs data\n"
-	"ecc sbecnt <val>        - set Single-Bit Error counter\n"
-	"ecc sbethr <val>        - set Single-Bit Threshold\n"
-	"ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-	"  [-|+]sbe - Single-Bit Error\n"
-	"  [-|+]mbe - Multiple-Bit Error\n"
-	"  [-|+]mse - Memory Select Error\n"
-	"  [-|+]all - all errors\n"
-	"ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-	"  mme - Multiple Memory Errors\n"
-	"  sbe - Single-Bit Error\n"
-	"  mbe - Multiple-Bit Error\n"
-	"  mse - Memory Select Error\n"
-	"  all - all errors\n"
-	"ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-	"ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-	"ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-	"ecc inject <en|dis>    - enable/disable error injection\n"
-	"ecc mirror <en|dis>    - enable/disable mirror byte\n"
-	"ecc test <addr> <cnt>  - test mem region:\n"
-	"  - enables injects\n"
-	"  - writes pattern injecting errors\n"
-	"  - disables injects\n"
-	"  - reads pattern back, generates error\n"
-	"  - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
 #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
index b109317be4..3fa093d1d5 100644
--- a/board/mpc8360emds/mpc8360emds.c
+++ b/board/mpc8360emds/mpc8360emds.c
@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
  * Dave Liu <daveliu@freescale.com>
- * based on board/mpc8349emds/mpc8349emds.c
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -19,7 +17,6 @@
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
-#include <command.h>
 #if defined(CONFIG_PCI)
 #include <pci.h>
 #endif
@@ -288,381 +285,6 @@ void sdram_init(void)
 }
 #endif
 
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-
-	printf("\nECC mode: %s\n\n",
-	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-	/* Interrupts */
-	printf("Memory Error Interrupt Enable:\n");
-	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-	printf("  Single-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-	printf("  Memory Select Error Interrupt Enable: %d\n\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-	/* Error disable */
-	printf("Memory Error Disable:\n");
-	printf("  Multiple-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-	printf("  Sinle-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-	printf("  Memory Select Error Disable: %d\n\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-	/* Error injection */
-	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-	printf("Memory Data Path Error Injection Mask ECC:\n");
-	printf("  ECC Mirror Byte: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-	printf("  ECC Injection Enable: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-	printf("  ECC Error Injection Mask: 0x%02x\n\n",
-	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-	/* SBE counter/threshold */
-	printf("Memory Single-Bit Error Management (0..255):\n");
-	printf("  Single-Bit Error Threshold: %d\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-	printf("  Single-Bit Error Counter: %d\n\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-	/* Error detect */
-	printf("Memory Error Detect:\n");
-	printf("  Multiple Memory Errors: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-	printf("  Multiple-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-	printf("  Single-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-	printf("  Memory Select Error: %d\n\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-	/* Capture data */
-	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-	       ddr->capture_data_hi, ddr->capture_data_lo);
-	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-	       ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-	printf("Memory Error Attributes Capture:\n");
-	printf(" Data Beat Number: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
-	       ECC_CAPT_ATTR_BNUM_SHIFT);
-	printf("  Transaction Size: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
-	       ECC_CAPT_ATTR_TSIZ_SHIFT);
-	printf("  Transaction Source: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
-	       ECC_CAPT_ATTR_TSRC_SHIFT);
-	printf("  Transaction Type: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
-	       ECC_CAPT_ATTR_TTYP_SHIFT);
-	printf("  Error Information Valid: %d\n\n",
-	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile u32 val;
-	u64 *addr;
-	u32 count;
-	register u64 *i;
-	u32 ret[2];
-	u32 pattern[2];
-	u32 writeback[2];
-
-	/* The pattern is written into memory to generate error */
-	pattern[0] = 0xfedcba98UL;
-	pattern[1] = 0x76543210UL;
-
-	/* After injecting error, re-initialize the memory with the value */
-	writeback[0] = 0x01234567UL;
-	writeback[1] = 0x89abcdefUL;
-
-	if (argc > 4) {
-		printf("Usage:\n%s\n", cmdtp->usage);
-		return 1;
-	}
-
-	if (argc == 2) {
-		if (strcmp(argv[1], "status") == 0) {
-			ecc_print_status();
-			return 0;
-		} else if (strcmp(argv[1], "captureclear") == 0) {
-			ddr->capture_address = 0;
-			ddr->capture_data_hi = 0;
-			ddr->capture_data_lo = 0;
-			ddr->capture_ecc = 0;
-			ddr->capture_attributes = 0;
-			return 0;
-		}
-	}
-	if (argc == 3) {
-		if (strcmp(argv[1], "sbecnt") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "sbethr") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "errdisable") == 0) {
-			val = ddr->err_disable;
-
-			if (strcmp(argv[2], "+sbe") == 0) {
-				val |= ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "+mbe") == 0) {
-				val |= ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "+mse") == 0) {
-				val |= ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "+all") == 0) {
-				val |= (ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else if (strcmp(argv[2], "-sbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "-mbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "-mse") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "-all") == 0) {
-				val &= ~(ECC_ERROR_DISABLE_SBED |
-					 ECC_ERROR_DISABLE_MBED |
-					 ECC_ERROR_DISABLE_MSED);
-			} else {
-				printf("Incorrect err_disable field\n");
-				return 1;
-			}
-
-			ddr->err_disable = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "errdetectclr") == 0) {
-			val = ddr->err_detect;
-
-			if (strcmp(argv[2], "mme") == 0) {
-				val |= ECC_ERROR_DETECT_MME;
-			} else if (strcmp(argv[2], "sbe") == 0) {
-				val |= ECC_ERROR_DETECT_SBE;
-			} else if (strcmp(argv[2], "mbe") == 0) {
-				val |= ECC_ERROR_DETECT_MBE;
-			} else if (strcmp(argv[2], "mse") == 0) {
-				val |= ECC_ERROR_DETECT_MSE;
-			} else if (strcmp(argv[2], "all") == 0) {
-				val |= (ECC_ERROR_DETECT_MME |
-					ECC_ERROR_DETECT_MBE |
-					ECC_ERROR_DETECT_SBE |
-					ECC_ERROR_DETECT_MSE);
-			} else {
-				printf("Incorrect err_detect field\n");
-				return 1;
-			}
-
-			ddr->err_detect = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatahi") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_hi = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatalo") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_lo = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectecc") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-			if (val > 0xff) {
-				printf("Incorrect ECC inject mask, "
-				       "should be 0x00..0xff\n");
-				return 1;
-			}
-			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		} else if (strcmp(argv[1], "inject") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EIEN;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EIEN;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "mirror") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EMB;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EMB;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		}
-	}
-	if (argc == 4) {
-		if (strcmp(argv[1], "testdw") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				ppcDWstore((u32 *) i, pattern);
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* read data, this generates ECC error */
-				ppcDWload((u32 *) i, ret);
-				__asm__ __volatile__("sync");
-
-				/* re-initialize memory, double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-		if (strcmp(argv[1], "testword") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				*(u32 *) i = 0xfedcba98UL;
-				__asm__ __volatile__("sync");
-
-				/* sub double word write,
-				 * bus will read-modify-write,
-				 * generates ECC error */
-				*((u32 *) i + 1) = 0x76543210UL;
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* re-initialize memory,
-				 * double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-	}
-	printf("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
-	   "ecc     - support for DDR ECC features\n",
-	   "status              - print out status info\n"
-	   "ecc captureclear        - clear capture regs data\n"
-	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
-	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
-	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-	   "  [-|+]sbe - Single-Bit Error\n"
-	   "  [-|+]mbe - Multiple-Bit Error\n"
-	   "  [-|+]mse - Memory Select Error\n"
-	   "  [-|+]all - all errors\n"
-	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-	   "  mme - Multiple Memory Errors\n"
-	   "  sbe - Single-Bit Error\n"
-	   "  mbe - Multiple-Bit Error\n"
-	   "  mse - Memory Select Error\n"
-	   "  all - all errors\n"
-	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-	   "ecc inject <en|dis>    - enable/disable error injection\n"
-	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
-	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with double word access\n"
-	   "  - disables injects\n"
-	   "  - reads pattern back with double word access, generates error\n"
-	   "  - re-inits memory\n"
-	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with word access\n"
-	   "  - writes pattern with word access, generates error\n"
-	   "  - disables injects\n" "  - re-inits memory");
-#endif				/* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
 #if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
      && defined(CONFIG_OF_BOARD_SETUP)