diff options
author | Marcin Niestroj <m.niestroj@grinn-global.com> | 2019-01-19 17:06:46 +0100 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2019-03-13 09:14:35 +0100 |
commit | e020fb5ad29ec8f17ca966f8d56000d7abc934ec (patch) | |
tree | b15677f8aadeb344597116b0f865f66f9d60aeb4 /board | |
parent | 28a36fd8237132d5cbf1590a45752da7cc2e4047 (diff) |
ARM: liteboard: move towards driver model and device-tree boot
This patch mostly enables DM drivers in board defconfig and all their
dependencies. Additionally we remove USB code that is on longer
executed after enabling CONFIG_DM_USB. Enable CONFIG_PINCTRL, so we
can get rid of ethernet pin configuration.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Diffstat (limited to 'board')
-rw-r--r-- | board/grinn/liteboard/board.c | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/board/grinn/liteboard/board.c b/board/grinn/liteboard/board.c index 18d152a381..80910e4713 100644 --- a/board/grinn/liteboard/board.c +++ b/board/grinn/liteboard/board.c @@ -24,8 +24,6 @@ #include <mmc.h> #include <netdev.h> #include <spl.h> -#include <usb.h> -#include <usb/ehci-ci.h> DECLARE_GLOBAL_DATA_PTR; @@ -63,26 +61,6 @@ static iomux_v3_cfg_t const sd_pads[] = { MX6_PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -#ifdef CONFIG_FEC_MXC -static iomux_v3_cfg_t const fec1_pads[] = { - MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), - MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), - MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -static void setup_iomux_fec(void) -{ - imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); -} -#endif - static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); @@ -180,13 +158,6 @@ void board_late_mmc_init(void) #endif #ifdef CONFIG_FEC_MXC -int board_eth_init(bd_t *bis) -{ - setup_iomux_fec(); - - return fecmxc_initialize(bis); -} - static int setup_fec(void) { struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; @@ -207,13 +178,6 @@ static int setup_fec(void) } #endif -#ifdef CONFIG_USB_EHCI_MX6 -int board_usb_phy_mode(int port) -{ - return USB_INIT_HOST; -} -#endif - int board_early_init_f(void) { setup_iomux_uart(); |