powerpc/mpc85xx:Increase binary size for P, B & T series boards.

u-boot binary size for Freescale mpc85xx platforms is 512KB.
This has been reached to upper limit for some of the platforms causig
linker error.

So, Increase the u-boot binary size to 768KB.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

8 files changed, 40 insertions, 40 deletions

diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README
index 430f08244a..3bc396b35a 100644
--- a/board/freescale/c29xpcie/README
+++ b/board/freescale/c29xpcie/README
@@ -62,9 +62,9 @@ Build and program u-boot to NOR flash
 
 2. Program u-boot.bin into NOR flash
 	=> tftp $loadaddr $uboot
-	=> protect off eff80000 +$filesize
-	=> erase eff80000 +$filesize
-	=> cp.b $loadaddr eff80000 $filesize
+	=> protect off eff40000 +$filesize
+	=> erase eff40000 +$filesize
+	=> cp.b $loadaddr eff40000 $filesize
 
 3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on.
 
@@ -73,9 +73,9 @@ Alternate NOR bank
 There are four banks in C29XPCIE board, example to change bank booting:
 1. Program u-boot.bin into alternate NOR bank
 	=> tftp $loadaddr $uboot
-	=> protect off e9f80000 +$filesize
-	=> erase e9f80000 +$filesize
-	=> cp.b $loadaddr e9f80000 $filesize
+	=> protect off e9f40000 +$filesize
+	=> erase e9f40000 +$filesize
+	=> cp.b $loadaddr e9f40000 $filesize
 
 2. Switch to alternate NOR bank
 	=> cpld_cmd reset altbank [bank]
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 158a1b3152..cde246dde2 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -104,9 +104,9 @@ Build and burn u-boot to NOR flash
 
 2. Burn u-boot.bin into NOR flash
 	=> tftp $loadaddr $uboot
-	=> protect off eff80000 +$filesize
-	=> erase eff80000 +$filesize
-	=> cp.b $loadaddr eff80000 $filesize
+	=> protect off eff40000 +$filesize
+	=> erase eff40000 +$filesize
+	=> cp.b $loadaddr eff40000 $filesize
 
 3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on.
 
@@ -115,9 +115,9 @@ Alternate NOR bank
 ==================
 1. Burn u-boot.bin into alternate NOR bank
 	=> tftp $loadaddr $uboot
-	=> protect off eef80000 +$filesize
-	=> erase eef80000 +$filesize
-	=> cp.b $loadaddr eef80000 $filesize
+	=> protect off eef40000 +$filesize
+	=> erase eef40000 +$filesize
+	=> cp.b $loadaddr eef40000 $filesize
 
 2. Switch to alternate NOR bank
 	=> mw.b ffb00009 1
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB
index cf459b339e..c5d1419445 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PB
+++ b/board/freescale/p1010rdb/README.P1010RDB-PB
@@ -149,11 +149,11 @@ Steps to program images to flash for different boot mode
 1. NOR boot
    => tftp 1000000 u-boot.bin
    For bank0
-   => pro off all;era eff80000 efffffff;cp.b 1000000 eff80000 $filesize
+   => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
    set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
 
    For bank1
-   => pro off all;era eef80000 eeffffff;cp.b 1000000 eef80000 $filesize
+   => pro off all;era eef40000 eeffffff;cp.b 1000000 eef40000 $filesize
    set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board
 
 2. NAND boot
diff --git a/board/freescale/p1023rds/README b/board/freescale/p1023rds/README
index 685f5daa99..d382551c4d 100644
--- a/board/freescale/p1023rds/README
+++ b/board/freescale/p1023rds/README
@@ -62,8 +62,8 @@ To program the image in the boot flash bank:
 NOR flash boot:
 	=> tftp 1000000 u-boot.bin
 	=> protect off all
-	=> erase eff80000 efffffff
-	=> cp.b 1000000 eff80000 80000
+	=> erase eff40000 efffffff
+	=> cp.b 1000000 eff40000 c0000
 
 NAND flash boot:
 	=> tftp 1000000 u-boot-nand.bin
diff --git a/board/freescale/p1_p2_rdb/README b/board/freescale/p1_p2_rdb/README
index cb664a5bd7..cd66e5878d 100644
--- a/board/freescale/p1_p2_rdb/README
+++ b/board/freescale/p1_p2_rdb/README
@@ -20,8 +20,8 @@ Memory Map
 0xef00_0000 - 0xef7f_ffff	Alternate bank		8MB
 0xe800_0000 - 0xefff_ffff	Boot bank		8MB
 
-0xef78_0000 - 0xef7f_ffff	Alternate u-boot address	512KB
-0xeff8_0000 - 0xefff_ffff	Boot u-boot address		512KB
+0xef74_0000 - 0xef7f_ffff	Alternate u-boot address	768KB
+0xeff4_0000 - 0xefff_ffff	Boot u-boot address		768KB
 
 Switch settings to boot from the NOR flash banks
 ------------------------------------------------
@@ -33,16 +33,16 @@ Flashing Images
 To place a new u-boot image in the alternate flash bank and then boot
 with that new image temporarily, use this:
 	tftp 1000000 u-boot.bin
-	erase ef780000 ef7fffff
-	cp.b 1000000 ef780000 80000
+	erase ef740000 ef7fffff
+	cp.b 1000000 ef740000 c0000
 
 Now to boot from the alternate bank change the SW4[8] from 0 to 1.
 
 To program the image in the boot flash bank:
 	tftp 1000000 u-boot.bin
 	protect off all
-	erase eff80000 ffffffff
-	cp.b 1000000 eff80000 80000
+	erase eff40000 ffffffff
+	cp.b 1000000 eff40000 c0000
 
 Using the Device Tree Source File
 ---------------------------------
diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 292d0d39cf..9b5539fff3 100644
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -18,8 +18,8 @@ Boot from NOR flash
 2. Program image
 	=> tftp 1000000 u-boot.bin
 	=> protect off all
-	=> erase eff80000 efffffff
-	=> cp.b 1000000 eff80000 80000
+	=> erase eff40000 efffffff
+	=> cp.b 1000000 eff40000 c0000
 
 3. Program RCW
 	=> tftp 1000000 rcw.bin
@@ -30,8 +30,8 @@ Boot from NOR flash
 4. Program FMAN Firmware ucode
 	=> tftp 1000000 ucode.bin
 	=> protect off all
-	=> erase ef000000 ef0fffff
-	=> cp.b 1000000 ef000000 2000
+	=> erase eff00000 eff3ffff
+	=> cp.b 1000000 eff00000 2000
 
 5. Change DIP-switch
 	SW1[1-5] = 10110
@@ -50,11 +50,11 @@ Boot from SDCard
 3. Program the PBL image to SDCard
 	=> tftp 1000000 pbl_sd.bin
 	=> mmcinfo
-	=> mmc write 1000000 8 441
+	=> mmc write 1000000 8 672
 
 4. Program FMAN Firmware ucode
 	=> tftp 1000000 ucode.bin
-	=> mmc write 1000000 46a 10
+	=> mmc write 1000000 690 10
 
 5. Change DIP-switch
 	SW1[1-5] = 01100
diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README
index f8b53b4212..6d380ae86d 100644
--- a/board/freescale/t1040qds/README
+++ b/board/freescale/t1040qds/README
@@ -118,16 +118,16 @@ Start Address  End Address      Description                     Size
 NOR Flash memory Map on T1040QDS
 --------------------------------
  Start          End             Definition                       Size
-0xEFF80000      0xEFFFFFFF      u-boot (current bank)            512KB
-0xEFF60000      0xEFF7FFFF      u-boot env (current bank)        128KB
-0xEFF40000      0xEFF5FFFF      FMAN Ucode (current bank)        128KB
+0xEFF40000      0xEFFFFFFF      u-boot (current bank)            768KB
+0xEFF20000      0xEFF3FFFF      u-boot env (current bank)        128KB
+0xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)        128KB
 0xED300000      0xEFF3FFFF      rootfs (alt bank)                44MB + 256KB
 0xEC800000      0xEC8FFFF       Hardware device tree (alt bank)  1MB
 0xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)          7MB + 875KB
 0xEC000000      0xEC01FFFF      RCW (alt bank)                   128KB
-0xEBF80000      0xEBFFFFFF      u-boot (alt bank)                512KB
-0xEBF60000      0xEBF7FFFF      u-boot env (alt bank)            128KB
-0xEBF40000      0xEBF5FFFF      FMAN ucode (alt bank)            128KB
+0xEBF40000      0xEBFFFFFF      u-boot (alt bank)                768KB
+0xEBF20000      0xEBF3FFFF      u-boot env (alt bank)            128KB
+0xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)            128KB
 0xE9300000      0xEBF3FFFF      rootfs (current bank)            44MB + 256KB
 0xE8800000      0xE88FFFFF      Hardware device tree (cur bank)  11MB + 512KB
 0xE8020000      0xE86FFFFF      Linux.uImage (current bank)      7MB + 875KB
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
index 2cd8219c84..11e03bd300 100644
--- a/board/freescale/t104xrdb/README
+++ b/board/freescale/t104xrdb/README
@@ -161,16 +161,16 @@ Start Address  End Address      Description                     Size
 NOR Flash memory Map
 ---------------------
  Start          End             Definition                       Size
-0xEFF80000      0xEFFFFFFF      u-boot (current bank)            512KB
-0xEFF60000      0xEFF7FFFF      u-boot env (current bank)        128KB
-0xEFF40000      0xEFF5FFFF      FMAN Ucode (current bank)        128KB
+0xEFF40000      0xEFFFFFFF      u-boot (current bank)            768KB
+0xEFF20000      0xEFF3FFFF      u-boot env (current bank)        128KB
+0xEFF00000      0xEFF1FFFF      FMAN Ucode (current bank)        128KB
 0xED300000      0xEFF3FFFF      rootfs (alt bank)                44MB + 256KB
 0xEC800000      0xEC8FFFF       Hardware device tree (alt bank)  1MB
 0xEC020000      0xEC7FFFFF      Linux.uImage (alt bank)          7MB + 875KB
 0xEC000000      0xEC01FFFF      RCW (alt bank)                   128KB
-0xEBF80000      0xEBFFFFFF      u-boot (alt bank)                512KB
-0xEBF60000      0xEBF7FFFF      u-boot env (alt bank)            128KB
-0xEBF40000      0xEBF5FFFF      FMAN ucode (alt bank)            128KB
+0xEBF40000      0xEBFFFFFF      u-boot (alt bank)                768KB
+0xEBF20000      0xEBF3FFFF      u-boot env (alt bank)            128KB
+0xEBF00000      0xEBF1FFFF      FMAN ucode (alt bank)            128KB
 0xE9300000      0xEBF3FFFF      rootfs (current bank)            44MB + 256KB
 0xE8800000      0xE88FFFFF      Hardware device tree (cur bank)  11MB + 512KB
 0xE8020000      0xE86FFFFF      Linux.uImage (current bank)      7MB + 875KB