armv8: Move secure_ram variable out of generic global data

Secure_ram variable was put in generic global data. But only ARMv8
uses this variable. Move it to ARM specific data structure.

Signed-off-by: York Sun <york.sun@nxp.com>

5 files changed, 40 insertions, 35 deletions

diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
index 0fd835d74f..d4540d0a9a 100644
--- a/board/freescale/ls1043aqds/ddr.c
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -128,7 +128,7 @@ phys_size_t initdram(int board_type)
 void dram_init_banksize(void)
 {
 	/*
-	 * gd->secure_ram tracks the location of secure memory.
+	 * gd->arch.secure_ram tracks the location of secure memory.
 	 * It was set as if the memory starts from 0.
 	 * The address needs to add the offset of its bank.
 	 */
@@ -139,16 +139,17 @@ void dram_init_banksize(void)
 		gd->bd->bi_dram[1].size = gd->ram_size -
 					  CONFIG_SYS_DDR_BLOCK1_SIZE;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[1].start +
-				 gd->secure_ram -
-				 CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+				      gd->arch.secure_ram -
+				      CONFIG_SYS_DDR_BLOCK1_SIZE;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	} else {
 		gd->bd->bi_dram[0].size = gd->ram_size;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+				      gd->arch.secure_ram;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	}
 }
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
index 1e2fd2ed0c..61b1cc4f30 100644
--- a/board/freescale/ls1043ardb/ddr.c
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -189,7 +189,7 @@ phys_size_t initdram(int board_type)
 void dram_init_banksize(void)
 {
 	/*
-	 * gd->secure_ram tracks the location of secure memory.
+	 * gd->arch.secure_ram tracks the location of secure memory.
 	 * It was set as if the memory starts from 0.
 	 * The address needs to add the offset of its bank.
 	 */
@@ -200,16 +200,17 @@ void dram_init_banksize(void)
 		gd->bd->bi_dram[1].size = gd->ram_size -
 					  CONFIG_SYS_DDR_BLOCK1_SIZE;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[1].start +
-				 gd->secure_ram -
-				 CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+				      gd->arch.secure_ram -
+				      CONFIG_SYS_DDR_BLOCK1_SIZE;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	} else {
 		gd->bd->bi_dram[0].size = gd->ram_size;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+				      gd->arch.secure_ram;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	}
 }
diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c
index 1827ddca69..e6130ec709 100644
--- a/board/freescale/ls2080a/ddr.c
+++ b/board/freescale/ls2080a/ddr.c
@@ -177,7 +177,7 @@ void dram_init_banksize(void)
 #endif
 
 	/*
-	 * gd->secure_ram tracks the location of secure memory.
+	 * gd->arch.secure_ram tracks the location of secure memory.
 	 * It was set as if the memory starts from 0.
 	 * The address needs to add the offset of its bank.
 	 */
@@ -188,16 +188,17 @@ void dram_init_banksize(void)
 		gd->bd->bi_dram[1].size = gd->ram_size -
 					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[1].start +
-				 gd->secure_ram -
-				 CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+				      gd->arch.secure_ram -
+				      CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	} else {
 		gd->bd->bi_dram[0].size = gd->ram_size;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+				      gd->arch.secure_ram;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	}
 
diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c
index fcb03665bf..9c6f477c7f 100644
--- a/board/freescale/ls2080aqds/ddr.c
+++ b/board/freescale/ls2080aqds/ddr.c
@@ -177,7 +177,7 @@ void dram_init_banksize(void)
 #endif
 
 	/*
-	 * gd->secure_ram tracks the location of secure memory.
+	 * gd->arch.secure_ram tracks the location of secure memory.
 	 * It was set as if the memory starts from 0.
 	 * The address needs to add the offset of its bank.
 	 */
@@ -188,16 +188,17 @@ void dram_init_banksize(void)
 		gd->bd->bi_dram[1].size = gd->ram_size -
 					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[1].start +
-				 gd->secure_ram -
-				 CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+				      gd->arch.secure_ram -
+				      CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	} else {
 		gd->bd->bi_dram[0].size = gd->ram_size;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+				      gd->arch.secure_ram;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	}
 
diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
index a04d21be13..ecd1e71ad8 100644
--- a/board/freescale/ls2080ardb/ddr.c
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -177,7 +177,7 @@ void dram_init_banksize(void)
 #endif
 
 	/*
-	 * gd->secure_ram tracks the location of secure memory.
+	 * gd->arch.secure_ram tracks the location of secure memory.
 	 * It was set as if the memory starts from 0.
 	 * The address needs to add the offset of its bank.
 	 */
@@ -188,16 +188,17 @@ void dram_init_banksize(void)
 		gd->bd->bi_dram[1].size = gd->ram_size -
 					  CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[1].start +
-				 gd->secure_ram -
-				 CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+				      gd->arch.secure_ram -
+				      CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	} else {
 		gd->bd->bi_dram[0].size = gd->ram_size;
 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-		gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
-		gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+				      gd->arch.secure_ram;
+		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 #endif
 	}