ppc4xx: Change Kilauea to use the common DDR2 init function

This patch changes the kilauea and kilauea_nand (for NAND booting)
board port to not use a board specific DDR2 init routine anymore. Now
the common code from cpu/ppc4xx is used.

Thanks to Grant Erickson for all his basic work on this 405EX early
bootup.

Signed-off-by: Stefan Roese <sr@denx.de>

3 files changed, 1 insertions, 253 deletions

diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile
index 39328c2bda..981ef3a97e 100644
--- a/board/amcc/kilauea/Makefile
+++ b/board/amcc/kilauea/Makefile
@@ -25,8 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o cmd_pll.o memory.o
-SOBJS	= init.o
+COBJS	= $(BOARD).o cmd_pll.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/board/amcc/kilauea/init.S b/board/amcc/kilauea/init.S
deleted file mode 100644
index bf47d6bb5d..0000000000
--- a/board/amcc/kilauea/init.S
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- *   Grant Erickson <gerickson@nuovations.com>
- *
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Originally based on code provided from UDTech and AMCC
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#define mtsdram_as(reg, value)		\
-	addi	r4,0,reg	;	\
-	mtdcr	memcfga,r4	;	\
-	addis	r4,0,value@h	;	\
-	ori	r4,r4,value@l	;	\
-	mtdcr	memcfgd,r4	;
-
-#if defined(CONFIG_DDR_ECC)
-	.extern ecc_init
-#endif /* defined(CONFIG_DDR_ECC) */
-
-	.globl  ext_bus_cntlr_init
-ext_bus_cntlr_init:
-#if !defined(CFG_INIT_DCACHE_CS)
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
-
-	/*
-	 * DDR2 SDRAM Controller Setup
-	 */
-
-	/* Set Memory Bank Configuration Registers */
-	mtsdram_as(SDRAM_MB0CF, CFG_SDRAM0_MB0CF);
-	mtsdram_as(SDRAM_MB1CF, CFG_SDRAM0_MB1CF);
-	mtsdram_as(SDRAM_MB2CF, CFG_SDRAM0_MB2CF);
-	mtsdram_as(SDRAM_MB3CF, CFG_SDRAM0_MB3CF);
-
-	/* Set Memory Clock Timing Register */
-	mtsdram_as(SDRAM_CLKTR, CFG_SDRAM0_CLKTR);
-
-	/* Set Refresh Time Register */
-	mtsdram_as(SDRAM_RTR, CFG_SDRAM0_RTR);
-
-	/* Set SDRAM Timing Registers */
-	mtsdram_as(SDRAM_SDTR1, CFG_SDRAM0_SDTR1);
-	mtsdram_as(SDRAM_SDTR2, CFG_SDRAM0_SDTR2);
-	mtsdram_as(SDRAM_SDTR3, CFG_SDRAM0_SDTR3);
-
-	/* Set Mode and Extended Mode Registers */
-	mtsdram_as(SDRAM_MMODE, CFG_SDRAM0_MMODE);
-	mtsdram_as(SDRAM_MEMODE, CFG_SDRAM0_MEMODE);
-
-	/* Set Memory Controller Options 1 Register */
-	mtsdram_as(SDRAM_MCOPT1, CFG_SDRAM0_MCOPT1);
-
-	/* Set Manual Initialization Control Registers */
-	mtsdram_as(SDRAM_INITPLR0, CFG_SDRAM0_INITPLR0);
-	mtsdram_as(SDRAM_INITPLR1, CFG_SDRAM0_INITPLR1);
-	mtsdram_as(SDRAM_INITPLR2, CFG_SDRAM0_INITPLR2);
-	mtsdram_as(SDRAM_INITPLR3, CFG_SDRAM0_INITPLR3);
-	mtsdram_as(SDRAM_INITPLR4, CFG_SDRAM0_INITPLR4);
-	mtsdram_as(SDRAM_INITPLR5, CFG_SDRAM0_INITPLR5);
-	mtsdram_as(SDRAM_INITPLR6, CFG_SDRAM0_INITPLR6);
-	mtsdram_as(SDRAM_INITPLR7, CFG_SDRAM0_INITPLR7);
-	mtsdram_as(SDRAM_INITPLR8, CFG_SDRAM0_INITPLR8);
-	mtsdram_as(SDRAM_INITPLR9, CFG_SDRAM0_INITPLR9);
-	mtsdram_as(SDRAM_INITPLR10, CFG_SDRAM0_INITPLR10);
-	mtsdram_as(SDRAM_INITPLR11, CFG_SDRAM0_INITPLR11);
-	mtsdram_as(SDRAM_INITPLR12, CFG_SDRAM0_INITPLR12);
-	mtsdram_as(SDRAM_INITPLR13, CFG_SDRAM0_INITPLR13);
-	mtsdram_as(SDRAM_INITPLR14, CFG_SDRAM0_INITPLR14);
-	mtsdram_as(SDRAM_INITPLR15, CFG_SDRAM0_INITPLR15);
-
-	/* Set On-Die Termination Registers */
-	mtsdram_as(SDRAM_CODT, CFG_SDRAM0_CODT);
-	mtsdram_as(SDRAM_MODT0, CFG_SDRAM0_MODT0);
-	mtsdram_as(SDRAM_MODT1, CFG_SDRAM0_MODT1);
-
-	/* Set Write Timing Register */
-	mtsdram_as(SDRAM_WRDTR, CFG_SDRAM0_WRDTR);
-
-	/*
-	 * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
-	 * SDRAM0_MCOPT2[IPTR] = 1
-	 */
-	mtsdram_as(SDRAM_MCOPT2, SDRAM_MCOPT2_SREN_EXIT | \
-				 SDRAM_MCOPT2_IPTR_EXECUTE);
-
-	/*
-	 * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
-	 * completion of initialization.
-	 *
-	 *   do {
-	 *           mfsdram(SDRAM_MCSTAT, val);
-	 *   } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
-	 */
-	li	r4,SDRAM_MCSTAT
-	lis	r2,SDRAM_MCSTAT_MIC_COMP@h
-	ori	r2,r2,SDRAM_MCSTAT_MIC_COMP@l
-0:	mtdcr	memcfga,r4
-	mfdcr	r3,memcfgd
-	clrrwi	r3,r3,31
-	cmpw	cr7,r3,r2
-	bne+	cr7,0b
-
-	/* Set Delay Control Registers */
-	mtsdram_as(SDRAM_DLCR, CFG_SDRAM0_DLCR);
-	mtsdram_as(SDRAM_RDCC, CFG_SDRAM0_RDCC);
-	mtsdram_as(SDRAM_RQDC, CFG_SDRAM0_RQDC);
-	mtsdram_as(SDRAM_RFDC, CFG_SDRAM0_RFDC);
-
-	/*
-	 * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
-	 *
-	 *   mcopt2 = mfsdram(SDRAM_MCOPT2);
-	 */
-	li	r4,SDRAM_MCOPT2
-	mtdcr	memcfga,r4
-	mfdcr	r3,memcfgd
-
-	/*
-	 *   mtsdram(SDRAM_MCOPT2, mcopt2 | SDRAM_MCOPT2_DCEN_ENABLE);
-	 */
-	mtdcr	memcfga,r4
-	oris	r3,r3,SDRAM_MCOPT2_DCEN_ENABLE@h
-	ori	r3,r3,SDRAM_MCOPT2_DCEN_ENABLE@l
-	mtdcr	memcfgd,r3
-
-#if defined(CONFIG_DDR_ECC)
-	/*
-	 *   ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
-	 */
-	mflr	r13
-	lis	r3,CFG_SDRAM_BASE@h
-	ori	r3,r3,CFG_SDRAM_BASE@l
-	lis	r4,(CFG_MBYTES_SDRAM << 20)@h
-	ori	r4,r4,(CFG_MBYTES_SDRAM << 20)@l
-	bl	ecc_init
-	mtlr	r13
-#endif /* defined(CONFIG_DDR_ECC) */
-#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-#endif /* !defined(CFG_INIT_DCACHE_CS) */
-
-	blr
diff --git a/board/amcc/kilauea/memory.c b/board/amcc/kilauea/memory.c
deleted file mode 100644
index b7e2344fd7..0000000000
--- a/board/amcc/kilauea/memory.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- *   Grant Erickson <gerickson@nuovations.com>
- *
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-
-void sdram_init(void)
-{
-	return;
-}
-
-#if defined(CONFIG_NAND_U_BOOT)
-long int initdram(int board_type)
-{
-	return (CFG_MBYTES_SDRAM << 20);
-}
-#endif /* defined(CONFIG_NAND_U_BOOT) */
-
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-    printf ("testdram\n");
-#if defined (CONFIG_NAND_U_BOOT)
-    return 0;
-#endif
-	uint *pstart = (uint *) 0x00000000;
-	uint *pend = (uint *) 0x00001000;
-	uint *p;
-
-	for (p = pstart; p < pend; p++) {
-		*p = 0xaaaaaaaa;
-	}
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-#if !defined (CONFIG_NAND_SPL)
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-#endif
-			return 1;
-		}
-	}
-
-	for (p = pstart; p < pend; p++) {
-		*p = 0x55555555;
-	}
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-#if !defined (CONFIG_NAND_SPL)
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-#endif
-			return 1;
-		}
-	}
-#if !defined (CONFIG_NAND_SPL)
-	printf ("SDRAM test passed!!!\n");
-#endif
-	return 0;
-}
-#endif