Merge git://www.denx.de/git/u-boot

8 files changed, 32 insertions, 19 deletions

diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 7b16f8a39a..0067ce0e7e 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -39,8 +39,6 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  ************************************************************************/
 int board_early_init_f(void)
 {
-	volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
-
 	mtebc( pb0ap,  0x03800000 );	/* set chip selects */
 	mtebc( pb0cr,  0xffc58000 );	/* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
 	mtebc( pb1ap,  0x03800000 );
@@ -66,8 +64,6 @@ int board_early_init_f(void)
 	mtdcr( uic0sr, 0x00000000 );	/* clear all interrupts */
 	mtdcr( uic0sr, 0xffffffff );
 
-	x->ethuart &= ~EPLD2_RESET_ETH_N; /* put Ethernet+PHY in reset */
-
 	return  0;
 }
 
@@ -79,7 +75,18 @@ int board_early_init_f(void)
 int misc_init_r(void)
 {
 	volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
-	x->ethuart |= EPLD2_RESET_ETH_N; /* take Ethernet+PHY out of reset */
+
+	/* set modes of operation */
+	x->ethuart |= EPLD2_ETH_MODE_10 | EPLD2_ETH_MODE_100 |
+		EPLD2_ETH_MODE_1000 | EPLD2_ETH_DUPLEX_MODE;
+	/* clear ETHERNET_AUTO_NEGO bit to turn on autonegotiation */
+	x->ethuart &= ~EPLD2_ETH_AUTO_NEGO;
+
+	/* put Ethernet+PHY in reset */
+	x->ethuart &= ~EPLD2_RESET_ETH_N;
+	udelay(10000);
+	/* take Ethernet+PHY out of reset */
+	x->ethuart |= EPLD2_RESET_ETH_N;
 
 	return  0;
 }
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index f3803c09f8..e7997e94db 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -25,6 +25,7 @@
 #include <common.h>
 #include <command.h>
 #include <i2c.h>
+#include <asm/io.h>
 
 /*
  * There are 2 versions of production Sequoia & Rainier platforms.
@@ -200,8 +201,12 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	/* check CPLD register +5 for PCI 66MHz flag */
-	if (in8(CFG_BCSR_BASE + 5) & 0x01)
-		buf[5] += 0x10;
+	if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0)
+		/*
+		 * PLB-to-PCI divisor = 3 for 33MHz sync PCI
+		 * instead of 2 for 66MHz systems
+		 */
+		buf[5] |= 0x08;
 
 	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index f823117687..4e47ab395b 100644
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
@@ -24,6 +24,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <ppc440.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -362,8 +363,8 @@ int checkboard(void)
 	printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
 #endif
 
-	rev = in8(CFG_BCSR_BASE + 0);
-	val = in8(CFG_BCSR_BASE + 5) & 0x01;
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 912f09ee43..6ec922ab00 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,6 +24,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <spd_sdram.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -181,8 +184,8 @@ int checkboard(void)
 	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
 #endif
 
-	rev = *(u8 *)(CFG_CPLD + 0);
-	val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {
diff --git a/board/at91rm9200dk/led.c b/board/at91rm9200dk/led.c
index 051891883f..47a3bfce68 100644
--- a/board/at91rm9200dk/led.c
+++ b/board/at91rm9200dk/led.c
@@ -66,7 +66,7 @@ void	red_LED_off(void)
 }
 
 
-void LED_init (void)
+void coloured_LED_init (void)
 {
 	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
 	AT91PS_PMC	PMC	= AT91C_BASE_PMC;
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 958f4dc330..93d790f173 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -55,10 +55,6 @@ unsigned long flash_init(void)
 	unsigned long addr;
 	unsigned int i;
 
-	gd->bd->bi_flashstart = CFG_FLASH_BASE;
-	gd->bd->bi_flashsize = CFG_FLASH_SIZE;
-	gd->bd->bi_flashoffset = _edata - _text;
-
 	flash_info[0].size = CFG_FLASH_SIZE;
 	flash_info[0].sector_count = 135;
 
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index b74ac08bce..e2ab5b8e26 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -397,6 +397,7 @@ int misc_init_r(void)
 					"operational\n");
 
 	/* set the hostname appropriate to the module we're running on */
+	hostname[0] = 0x00;
 	compose_hostname(hw_id, hostname);
 	setenv("hostname", hostname);
 
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 45ab6548f6..a4c463a314 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -288,7 +288,7 @@ int dram_init(void)
 
 int checkboard(void)
 {
-	unsigned char s[50];
+	char s[50];
 	int i;
 	backup_t *b = (backup_t *) s;
 
@@ -337,7 +337,7 @@ int overwrite_console(void)
 ************************************************************************/
 void print_vcma9_info(void)
 {
-	unsigned char s[50];
+	char s[50];
 	int i;
 
 	if ((i = getenv_r("serial#", s, 32)) < 0) {