diff options
| author | Dan Cimpoca <dan.I.cimpoca@ge.com> | 2018-10-15 12:09:56 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-10-22 14:32:40 +0200 |
| commit | f767a4e82e37a41414764e619607e424c6d3bc71 (patch) | |
| tree | c3556d2ed06a5a30c4d43bd8162a4091394de379 /board | |
| parent | 9aa7c157edfc08ce6ee70d8e44a7f162a657a329 (diff) | |
board: ge: bx50v3: fix initialization of i2c bus0
I2C bus 0 was not initialized correctly. There is an offset between i2c
index and the structure number of pad info. So i2c bus 0 can be in an
inconsistent state.
This problem become visible on B{4,6}50v3 with the CPUC HW watchdog enabled.
Sometimes when the CPUC HW watchdog interrupted the boot process, U-Boot was
not able to read VPD from I2C/EEPROM and the system failed to boot up again,
because a device connected to that bus was stuck in data transfer state (from
previous boot attempt) and there was no method to recover (struct
mxc_i2c_bus::idle_bus_fn was not set) courtesy of incorrect initialization.
Signed-off-by: Dan Cimpoca <dan.I.cimpoca@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/ge/bx50v3/bx50v3.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c index 2eb1b65a3d..245852510f 100644 --- a/board/ge/bx50v3/bx50v3.c +++ b/board/ge/bx50v3/bx50v3.c @@ -714,9 +714,9 @@ static void set_confidx(const struct vpd_cache* vpd) int board_init(void) { - setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); - setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3); read_vpd(CONFIG_SYS_I2C_EEPROM_BUS); |