summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2019-12-01 11:23:15 +0100
committerStefano Babic <sbabic@denx.de>2020-01-07 10:26:55 +0100
commitfc7e3cc639c28e0e86af633e6f63902809e975dd (patch)
treef97a92ef04436a5e4278b1153f7b62b10e4203d4 /board
parent8664c485d9ebccc827935242e3b952c43c5950db (diff)
imx6: aristainetos: convert gpio pins to DM and DTS
Enable DM_GPIO, GPIO_HOG, LED and LED_GPIO as gpio and LEDs are now defined in DTS. Enable also here the pinctrl driver, so pinmux setup is also done. Signed-off-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'board')
-rw-r--r--board/aristainetos/aristainetos.c134
1 files changed, 53 insertions, 81 deletions
diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c
index 6de71a46ed..5639eefa15 100644
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -38,6 +38,7 @@
#if defined(CONFIG_VIDEO_BMP_LOGO)
#include <bmp_logo.h>
#endif
+#include <led.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -67,9 +68,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define ECSPI1_CS1 IMX_GPIO_NR(4, 10)
#endif
-#define SOFT_RESET_GPIO IMX_GPIO_NR(7, 13)
-#define SD2_DRIVER_ENABLE IMX_GPIO_NR(7, 8)
-
enum {
BOARD_TYPE_4 = 4,
BOARD_TYPE_7 = 7,
@@ -104,43 +102,6 @@ struct i2c_pads_info i2c_pad_info4 = {
}
};
-iomux_v3_cfg_t const gpio_pads[] = {
- /* LED enable*/
- MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* LED yellow */
- MX6_PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* LED red */
-#if (CONFIG_SYS_BOARD_VERSION == 2)
- MX6_PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
-#elif (CONFIG_SYS_BOARD_VERSION == 3)
- MX6_PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
-#endif
- /* LED green */
- MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* LED blue */
- MX6_PAD_EIM_EB1__GPIO2_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* spi flash WP protect */
- MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* spi CS 0 */
- MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* spi bus #2 SS driver enable */
- MX6_PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* RST_LOC# PHY reset input (has pull-down!)*/
- MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* SD 2 level shifter output enable */
- MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* SD1 card detect input */
- MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* SD1 write protect input */
- MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* SD2 card detect input */
- MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* SD2 write protect input */
- MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
- /* Touchscreen IRQ */
- MX6_PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
static iomux_v3_cfg_t const misc_pads[] = {
/* USB_OTG_ID = GPIO1_24*/
MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
@@ -265,12 +226,16 @@ static void setup_spi(void)
for (i = 0; i < 4; i++)
enable_spi_clk(true, i);
+ gpio_request(ECSPI1_CS0, "spi1_cs0");
gpio_direction_output(ECSPI1_CS0, 1);
#if (CONFIG_SYS_BOARD_VERSION == 2)
+ gpio_request(ECSPI4_CS1, "spi4_cs1");
gpio_direction_output(ECSPI4_CS1, 0);
/* set cs0 to high (second device on spi bus #4) */
+ gpio_request(ECSPI4_CS0, "spi4_cs0");
gpio_direction_output(ECSPI4_CS0, 1);
#elif (CONFIG_SYS_BOARD_VERSION == 3)
+ gpio_request(ECSPI1_CS1, "spi1_cs1");
gpio_direction_output(ECSPI1_CS1, 1);
#endif
}
@@ -359,9 +324,13 @@ static void enable_display_power(void)
ARRAY_SIZE(backlight_pads));
/* backlight enable */
+ gpio_request(IMX_GPIO_NR(6, 31), "backlight");
gpio_direction_output(IMX_GPIO_NR(6, 31), 1);
+ gpio_free(IMX_GPIO_NR(6, 31));
/* LCD power enable */
+ gpio_request(IMX_GPIO_NR(6, 15), "LCD_power_enable");
gpio_direction_output(IMX_GPIO_NR(6, 15), 1);
+ gpio_free(IMX_GPIO_NR(6, 15));
/* enable backlight PWM 1 */
if (pwm_init(0, 0, 0))
@@ -547,11 +516,6 @@ static void setup_display(void)
enable_display_power();
}
-static void setup_iomux_gpio(void)
-{
- imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
-}
-
static void set_gpr_register(void)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
@@ -570,10 +534,6 @@ static void set_gpr_register(void)
extern char __bss_start[], __bss_end[];
int board_early_init_f(void)
{
- setup_iomux_gpio();
-
- gpio_direction_output(SOFT_RESET_GPIO, 1);
- gpio_direction_output(SD2_DRIVER_ENABLE, 1);
setup_display();
set_gpr_register();
@@ -593,37 +553,30 @@ static void setup_i2c4(void)
&i2c_pad_info4);
}
-static void setup_board_gpio(void)
+static void setup_one_led(char *label, int state)
{
- /* enable all LEDs */
- gpio_request(IMX_GPIO_NR(2, 13), "LED ena"); /* 25 */
- gpio_direction_output(IMX_GPIO_NR(1, 25), 0);
+ struct udevice *dev;
+ int ret;
+ ret = led_get_by_label(label, &dev);
+ if (ret == 0)
+ led_set_state(dev, state);
+}
+
+static void setup_board_gpio(void)
+{
+ setup_one_led("led_ena", LEDST_ON);
/* switch off Status LEDs */
-#if (CONFIG_SYS_BOARD_VERSION == 2)
- gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
- gpio_direction_output(IMX_GPIO_NR(6, 16), 1);
- gpio_request(IMX_GPIO_NR(2, 28), "LED red"); /* 60 */
- gpio_direction_output(IMX_GPIO_NR(2, 28), 1);
- gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
- gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
- gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
- gpio_direction_output(IMX_GPIO_NR(2, 29), 1);
-#elif (CONFIG_SYS_BOARD_VERSION == 3)
- gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
- gpio_direction_output(IMX_GPIO_NR(6, 16), 0);
- gpio_request(IMX_GPIO_NR(5, 0), "LED red"); /* 128 */
- gpio_direction_output(IMX_GPIO_NR(5, 0), 0);
- gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
- gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
- gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
- gpio_direction_output(IMX_GPIO_NR(2, 29), 0);
-#endif
+ setup_one_led("led_yellow", LEDST_OFF);
+ setup_one_led("led_red", LEDST_OFF);
+ setup_one_led("led_green", LEDST_OFF);
+ setup_one_led("led_blue", LEDST_OFF);
}
static void setup_board_spi(void)
{
/* enable spi bus #2 SS drivers (and spi bus #4 SS1 for rev2b) */
+ gpio_request(IMX_GPIO_NR(6, 6), "spi_ena");
gpio_direction_output(IMX_GPIO_NR(6, 6), 1);
}
@@ -632,20 +585,23 @@ int board_late_init(void)
char *my_bootdelay;
char bootmode = 0;
char const *panel = env_get("panel");
+ struct gpio_desc *desc;
+ int ret;
+ led_default_state();
/*
* Check the boot-source. If booting from NOR Flash,
* disable bootdelay
*/
- gpio_request(IMX_GPIO_NR(7, 6), "bootsel0");
- gpio_direction_input(IMX_GPIO_NR(7, 6));
- gpio_request(IMX_GPIO_NR(7, 7), "bootsel1");
- gpio_direction_input(IMX_GPIO_NR(7, 7));
- gpio_request(IMX_GPIO_NR(7, 1), "bootsel2");
- gpio_direction_input(IMX_GPIO_NR(7, 1));
- bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 6)) ? 1 : 0) << 0;
- bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 7)) ? 1 : 0) << 1;
- bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 1)) ? 1 : 0) << 2;
+ desc = gpio_hog_lookup_name("bootsel0");
+ if (desc)
+ bootmode |= (dm_gpio_get_value(desc) ? 1 : 0) << 0;
+ desc = gpio_hog_lookup_name("bootsel1");
+ if (desc)
+ bootmode |= (dm_gpio_get_value(desc) ? 1 : 0) << 1;
+ desc = gpio_hog_lookup_name("bootsel2");
+ if (desc)
+ bootmode |= (dm_gpio_get_value(desc) ? 1 : 0) << 2;
if (bootmode == 7) {
my_bootdelay = env_get("nor_bootdelay");
@@ -655,6 +611,22 @@ int board_late_init(void)
env_set("bootdelay", "-2");
}
+ /* read out some jumper values*/
+ ret = gpio_hog_lookup_name("env_reset", &desc);
+ if (!ret) {
+ if (dm_gpio_get_value(desc)) {
+ printf("\nClear env (set back to defaults)\n");
+ run_command("run default_env; saveenv; saveenv", 0);
+ }
+ }
+ ret = gpio_hog_lookup_name("boot_rescue", &desc);
+ if (!ret) {
+ if (dm_gpio_get_value(desc)) {
+ aristainetos_run_rescue_command(16);
+ run_command("run rescue_xload_boot", 0);
+ }
+ }
+
/* if we have the lg panel, we can initialze it now */
if (panel)
if (!strcmp(panel, displays[1].mode.name))