Convert CONFIG_CMD_IMMAP to Kconfig

This converts the following to Kconfig:
   CONFIG_CMD_IMMAP

Also move this command out of the cmd/ directory since it is
PowerPC-specific.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 703 deletions

diff --git a/cmd/immap.c b/cmd/immap.c
deleted file mode 100644
index 1414f9ad55..0000000000
--- a/cmd/immap.c
+++ /dev/null
@@ -1,703 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * MPC8xx/MPC8260 Internal Memory Map Functions
- */
-
-#include <common.h>
-#include <command.h>
-
-#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
-
-#if defined(CONFIG_8xx)
-#include <asm/8xx_immap.h>
-#include <commproc.h>
-#include <asm/iopin_8xx.h>
-#elif defined(CONFIG_MPC8260)
-#include <asm/immap_8260.h>
-#include <asm/cpm_8260.h>
-#include <asm/iopin_8260.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void
-unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	printf ("Sorry, but the '%s' command has not been implemented\n",
-		cmdtp->name);
-}
-
-int
-do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_8xx)
-	volatile sysconf8xx_t *sc = &immap->im_siu_conf;
-#elif defined(CONFIG_MPC8260)
-	volatile sysconf8260_t *sc = &immap->im_siu_conf;
-#endif
-
-	printf ("SIUMCR= %08x SYPCR = %08x\n", sc->sc_siumcr, sc->sc_sypcr);
-#if defined(CONFIG_8xx)
-	printf ("SWT   = %08x\n", sc->sc_swt);
-	printf ("SIPEND= %08x SIMASK= %08x\n", sc->sc_sipend, sc->sc_simask);
-	printf ("SIEL  = %08x SIVEC = %08x\n", sc->sc_siel, sc->sc_sivec);
-	printf ("TESR  = %08x SDCR  = %08x\n", sc->sc_tesr, sc->sc_sdcr);
-#elif defined(CONFIG_MPC8260)
-	printf ("BCR   = %08x\n", sc->sc_bcr);
-	printf ("P_ACR =       %02x P_ALRH= %08x P_ALRL= %08x\n",
-		sc->sc_ppc_acr, sc->sc_ppc_alrh, sc->sc_ppc_alrl);
-	printf ("L_ACR =       %02x L_ALRH= %08x L_ALRL= %08x\n",
-		sc->sc_lcl_acr, sc->sc_lcl_alrh, sc->sc_lcl_alrl);
-	printf ("PTESR1= %08x PTESR2= %08x\n", sc->sc_tescr1, sc->sc_tescr2);
-	printf ("LTESR1= %08x LTESR2= %08x\n", sc->sc_ltescr1, sc->sc_ltescr2);
-	printf ("PDTEA = %08x PDTEM =       %02x\n", sc->sc_pdtea, sc->sc_pdtem);
-	printf ("LDTEA = %08x LDTEM =       %02x\n", sc->sc_ldtea, sc->sc_ldtem);
-#endif
-	return 0;
-}
-
-int
-do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_8xx)
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	int nbanks = 8;
-#elif defined(CONFIG_MPC8260)
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-	int nbanks = 12;
-#endif
-	volatile uint *p = &memctl->memc_br0;
-	int i;
-
-	for (i = 0; i < nbanks; i++, p += 2) {
-		if (i < 10) {
-			printf ("BR%d   = %08x OR%d   = %08x\n",
-				i, p[0], i, p[1]);
-		} else {
-			printf ("BR%d  = %08x OR%d  = %08x\n",
-				i, p[0], i, p[1]);
-		}
-	}
-
-	printf ("MAR   = %08x", memctl->memc_mar);
-#if defined(CONFIG_8xx)
-	printf (" MCR   = %08x\n", memctl->memc_mcr);
-#elif defined(CONFIG_MPC8260)
-	putc ('\n');
-#endif
-	printf ("MAMR  = %08x MBMR  = %08x",
-		memctl->memc_mamr, memctl->memc_mbmr);
-#if defined(CONFIG_8xx)
-	printf ("\nMSTAT =     %04x\n", memctl->memc_mstat);
-#elif defined(CONFIG_MPC8260)
-	printf (" MCMR  = %08x\n", memctl->memc_mcmr);
-#endif
-	printf ("MPTPR =     %04x MDR   = %08x\n",
-		memctl->memc_mptpr, memctl->memc_mdr);
-#if defined(CONFIG_MPC8260)
-	printf ("PSDMR = %08x LSDMR = %08x\n",
-		memctl->memc_psdmr, memctl->memc_lsdmr);
-	printf ("PURT  =       %02x PSRT  =       %02x\n",
-		memctl->memc_purt, memctl->memc_psrt);
-	printf ("LURT  =       %02x LSRT  =       %02x\n",
-		memctl->memc_lurt, memctl->memc_lsrt);
-	printf ("IMMR  = %08x\n", memctl->memc_immr);
-#endif
-	return 0;
-}
-
-int
-do_sitinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-#ifdef CONFIG_MPC8260
-int
-do_icinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-#endif
-
-int
-do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_8xx)
-	volatile car8xx_t *car = &immap->im_clkrst;
-#elif defined(CONFIG_MPC8260)
-	volatile car8260_t *car = &immap->im_clkrst;
-#endif
-
-#if defined(CONFIG_8xx)
-	printf ("SCCR  = %08x\n", car->car_sccr);
-	printf ("PLPRCR= %08x\n", car->car_plprcr);
-	printf ("RSR   = %08x\n", car->car_rsr);
-#elif defined(CONFIG_MPC8260)
-	printf ("SCCR  = %08x\n", car->car_sccr);
-	printf ("SCMR  = %08x\n", car->car_scmr);
-	printf ("RSR   = %08x\n", car->car_rsr);
-	printf ("RMR   = %08x\n", car->car_rmr);
-#endif
-	return 0;
-}
-
-static int counter;
-
-static void
-header(void)
-{
-	char *data = "\
-       --------------------------------        --------------------------------\
-       00000000001111111111222222222233        00000000001111111111222222222233\
-       01234567890123456789012345678901        01234567890123456789012345678901\
-       --------------------------------        --------------------------------\
-    ";
-	int i;
-
-	if (counter % 2)
-		putc('\n');
-	counter = 0;
-
-	for (i = 0; i < 4; i++, data += 79)
-		printf("%.79s\n", data);
-}
-
-static void binary (char *label, uint value, int nbits)
-{
-	uint mask = 1 << (nbits - 1);
-	int i, second = (counter++ % 2);
-
-	if (second)
-		putc (' ');
-	puts (label);
-	for (i = 32 + 1; i != nbits; i--)
-		putc (' ');
-
-	while (mask != 0) {
-		if (value & mask)
-			putc ('1');
-		else
-			putc ('0');
-		mask >>= 1;
-	}
-
-	if (second)
-		putc ('\n');
-}
-
-#if defined(CONFIG_8xx)
-#define PA_NBITS	16
-#define PA_NB_ODR	 8
-#define PB_NBITS	18
-#define PB_NB_ODR	16
-#define PC_NBITS	12
-#define PD_NBITS	13
-#elif defined(CONFIG_MPC8260)
-#define PA_NBITS	32
-#define PA_NB_ODR	32
-#define PB_NBITS	28
-#define PB_NB_ODR	28
-#define PC_NBITS	32
-#define PD_NBITS	28
-#endif
-
-int
-do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_8xx)
-	volatile iop8xx_t *iop = &immap->im_ioport;
-	volatile ushort *l, *r;
-#elif defined(CONFIG_MPC8260)
-	volatile iop8260_t *iop = &immap->im_ioport;
-	volatile uint *l, *r;
-#endif
-	volatile uint *R;
-
-	counter = 0;
-	header ();
-
-	/*
-	 * Ports A & B
-	 */
-
-#if defined(CONFIG_8xx)
-	l = &iop->iop_padir;
-	R = &immap->im_cpm.cp_pbdir;
-#elif defined(CONFIG_MPC8260)
-	l = &iop->iop_pdira;
-	R = &iop->iop_pdirb;
-#endif
-	binary ("PA_DIR", *l++, PA_NBITS);
-	binary ("PB_DIR", *R++, PB_NBITS);
-	binary ("PA_PAR", *l++, PA_NBITS);
-	binary ("PB_PAR", *R++, PB_NBITS);
-#if defined(CONFIG_MPC8260)
-	binary ("PA_SOR", *l++, PA_NBITS);
-	binary ("PB_SOR", *R++, PB_NBITS);
-#endif
-	binary ("PA_ODR", *l++, PA_NB_ODR);
-	binary ("PB_ODR", *R++, PB_NB_ODR);
-	binary ("PA_DAT", *l++, PA_NBITS);
-	binary ("PB_DAT", *R++, PB_NBITS);
-
-	header ();
-
-	/*
-	 * Ports C & D
-	 */
-
-#if defined(CONFIG_8xx)
-	l = &iop->iop_pcdir;
-	r = &iop->iop_pddir;
-#elif defined(CONFIG_MPC8260)
-	l = &iop->iop_pdirc;
-	r = &iop->iop_pdird;
-#endif
-	binary ("PC_DIR", *l++, PC_NBITS);
-	binary ("PD_DIR", *r++, PD_NBITS);
-	binary ("PC_PAR", *l++, PC_NBITS);
-	binary ("PD_PAR", *r++, PD_NBITS);
-#if defined(CONFIG_8xx)
-	binary ("PC_SO ", *l++, PC_NBITS);
-	binary ("      ", 0, 0);
-	r++;
-#elif defined(CONFIG_MPC8260)
-	binary ("PC_SOR", *l++, PC_NBITS);
-	binary ("PD_SOR", *r++, PD_NBITS);
-	binary ("PC_ODR", *l++, PC_NBITS);
-	binary ("PD_ODR", *r++, PD_NBITS);
-#endif
-	binary ("PC_DAT", *l++, PC_NBITS);
-	binary ("PD_DAT", *r++, PD_NBITS);
-#if defined(CONFIG_8xx)
-	binary ("PC_INT", *l++, PC_NBITS);
-#endif
-
-	header ();
-	return 0;
-}
-
-/*
- * set the io pins
- * this needs a clean up for smaller tighter code
- * use *uint and set the address based on cmd + port
- */
-int
-do_iopset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	uint rcode = 0;
-	iopin_t iopin;
-	static uint port = 0;
-	static uint pin = 0;
-	static uint value = 0;
-	static enum {
-		DIR,
-		PAR,
-		SOR,
-		ODR,
-		DAT,
-#if defined(CONFIG_8xx)
-		INT
-#endif
-	} cmd = DAT;
-
-	if (argc != 5) {
-		puts ("iopset PORT PIN CMD VALUE\n");
-		return 1;
-	}
-	port = argv[1][0] - 'A';
-	if (port > 3)
-		port -= 0x20;
-	if (port > 3)
-		rcode = 1;
-	pin = simple_strtol (argv[2], NULL, 10);
-	if (pin > 31)
-		rcode = 1;
-
-
-	switch (argv[3][0]) {
-	case 'd':
-		if (argv[3][1] == 'a')
-			cmd = DAT;
-		else if (argv[3][1] == 'i')
-			cmd = DIR;
-		else
-			rcode = 1;
-		break;
-	case 'p':
-		cmd = PAR;
-		break;
-	case 'o':
-		cmd = ODR;
-		break;
-	case 's':
-		cmd = SOR;
-		break;
-#if defined(CONFIG_8xx)
-	case 'i':
-		cmd = INT;
-		break;
-#endif
-	default:
-		printf ("iopset: unknown command %s\n", argv[3]);
-		rcode = 1;
-	}
-	if (argv[4][0] == '1')
-		value = 1;
-	else if (argv[4][0] == '0')
-		value = 0;
-	else
-		rcode = 1;
-	if (rcode == 0) {
-		iopin.port = port;
-		iopin.pin = pin;
-		iopin.flag = 0;
-		switch (cmd) {
-		case DIR:
-			if (value)
-				iopin_set_out (&iopin);
-			else
-				iopin_set_in (&iopin);
-			break;
-		case PAR:
-			if (value)
-				iopin_set_ded (&iopin);
-			else
-				iopin_set_gen (&iopin);
-			break;
-		case SOR:
-			if (value)
-				iopin_set_opt2 (&iopin);
-			else
-				iopin_set_opt1 (&iopin);
-			break;
-		case ODR:
-			if (value)
-				iopin_set_odr (&iopin);
-			else
-				iopin_set_act (&iopin);
-			break;
-		case DAT:
-			if (value)
-				iopin_set_high (&iopin);
-			else
-				iopin_set_low (&iopin);
-			break;
-#if defined(CONFIG_8xx)
-		case INT:
-			if (value)
-				iopin_set_falledge (&iopin);
-			else
-				iopin_set_anyedge (&iopin);
-			break;
-#endif
-		}
-
-	}
-	return rcode;
-}
-
-int
-do_dmainfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-int
-do_fccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-static void prbrg (int n, uint val)
-{
-	uint extc = (val >> 14) & 3;
-	uint cd = (val & CPM_BRG_CD_MASK) >> 1;
-	uint div16 = (val & CPM_BRG_DIV16) != 0;
-
-#if defined(CONFIG_8xx)
-	ulong clock = gd->cpu_clk;
-#elif defined(CONFIG_MPC8260)
-	ulong clock = gd->arch.brg_clk;
-#endif
-
-	printf ("BRG%d:", n);
-
-	if (val & CPM_BRG_RST)
-		puts (" RESET");
-	else
-		puts ("      ");
-
-	if (val & CPM_BRG_EN)
-		puts ("  ENABLED");
-	else
-		puts (" DISABLED");
-
-	printf (" EXTC=%d", extc);
-
-	if (val & CPM_BRG_ATB)
-		puts (" ATB");
-	else
-		puts ("    ");
-
-	printf (" DIVIDER=%4d", cd);
-	if (extc == 0 && cd != 0) {
-		uint baudrate;
-
-		if (div16)
-			baudrate = (clock / 16) / (cd + 1);
-		else
-			baudrate = clock / (cd + 1);
-
-		printf ("=%6d bps", baudrate);
-	} else {
-		puts ("           ");
-	}
-
-	if (val & CPM_BRG_DIV16)
-		puts (" DIV16");
-	else
-		puts ("      ");
-
-	putc ('\n');
-}
-
-int
-do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_8xx)
-	volatile cpm8xx_t *cp = &immap->im_cpm;
-	volatile uint *p = &cp->cp_brgc1;
-#elif defined(CONFIG_MPC8260)
-	volatile uint *p = &immap->im_brgc1;
-#endif
-	int i = 1;
-
-	while (i <= 4)
-		prbrg (i++, *p++);
-
-#if defined(CONFIG_MPC8260)
-	p = &immap->im_brgc5;
-	while (i <= 8)
-		prbrg (i++, *p++);
-#endif
-	return 0;
-}
-
-int
-do_i2cinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_8xx)
-	volatile i2c8xx_t *i2c = &immap->im_i2c;
-	volatile cpm8xx_t *cp = &immap->im_cpm;
-	volatile iic_t *iip = (iic_t *) & cp->cp_dparam[PROFF_IIC];
-#elif defined(CONFIG_MPC8260)
-	volatile i2c8260_t *i2c = &immap->im_i2c;
-	volatile iic_t *iip;
-	uint dpaddr;
-
-	dpaddr = immap->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)];
-	if (dpaddr == 0)
-		iip = NULL;
-	else
-		iip = (iic_t *) & immap->im_dprambase[dpaddr];
-#endif
-
-	printf ("I2MOD = %02x I2ADD = %02x\n", i2c->i2c_i2mod, i2c->i2c_i2add);
-	printf ("I2BRG = %02x I2COM = %02x\n", i2c->i2c_i2brg, i2c->i2c_i2com);
-	printf ("I2CER = %02x I2CMR = %02x\n", i2c->i2c_i2cer, i2c->i2c_i2cmr);
-
-	if (iip == NULL)
-		puts ("i2c parameter ram not allocated\n");
-	else {
-		printf ("RBASE = %08x TBASE = %08x\n",
-			iip->iic_rbase, iip->iic_tbase);
-		printf ("RFCR  =       %02x TFCR  =       %02x\n",
-			iip->iic_rfcr, iip->iic_tfcr);
-		printf ("MRBLR =     %04x\n", iip->iic_mrblr);
-		printf ("RSTATE= %08x RDP   = %08x\n",
-			iip->iic_rstate, iip->iic_rdp);
-		printf ("RBPTR =     %04x RBC   =     %04x\n",
-			iip->iic_rbptr, iip->iic_rbc);
-		printf ("RXTMP = %08x\n", iip->iic_rxtmp);
-		printf ("TSTATE= %08x TDP   = %08x\n",
-			iip->iic_tstate, iip->iic_tdp);
-		printf ("TBPTR =     %04x TBC   =     %04x\n",
-			iip->iic_tbptr, iip->iic_tbc);
-		printf ("TXTMP = %08x\n", iip->iic_txtmp);
-	}
-	return 0;
-}
-
-int
-do_sccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-int
-do_smcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-int
-do_spiinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-int
-do_muxinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-int
-do_siinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-int
-do_mccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	unimplemented (cmdtp, flag, argc, argv);
-	return 0;
-}
-
-/***************************************************/
-
-U_BOOT_CMD(
-	siuinfo,	1,	1,	do_siuinfo,
-	"print System Interface Unit (SIU) registers",
-	""
-);
-
-U_BOOT_CMD(
-	memcinfo,	1,	1,	do_memcinfo,
-	"print Memory Controller registers",
-	""
-);
-
-U_BOOT_CMD(
-	sitinfo,	1,	1,	do_sitinfo,
-	"print System Integration Timers (SIT) registers",
-	""
-);
-
-#ifdef CONFIG_MPC8260
-U_BOOT_CMD(
-	icinfo,	1,	1,	do_icinfo,
-	"print Interrupt Controller registers",
-	""
-);
-#endif
-
-U_BOOT_CMD(
-	carinfo,	1,	1,	do_carinfo,
-	"print Clocks and Reset registers",
-	""
-);
-
-U_BOOT_CMD(
-	iopinfo,	1,	1,	do_iopinfo,
-	"print I/O Port registers",
-	""
-);
-
-U_BOOT_CMD(
-	iopset,	5,	0,	do_iopset,
-	"set I/O Port registers",
-	"PORT PIN CMD VALUE\nPORT: A-D, PIN: 0-31, CMD: [dat|dir|odr|sor], VALUE: 0|1"
-);
-
-U_BOOT_CMD(
-	dmainfo,	1,	1,	do_dmainfo,
-	"print SDMA/IDMA registers",
-	""
-);
-
-U_BOOT_CMD(
-	fccinfo,	1,	1,	do_fccinfo,
-	"print FCC registers",
-	""
-);
-
-U_BOOT_CMD(
-	brginfo,	1,	1,	do_brginfo,
-	"print Baud Rate Generator (BRG) registers",
-	""
-);
-
-U_BOOT_CMD(
-	i2cinfo,	1,	1,	do_i2cinfo,
-	"print I2C registers",
-	""
-);
-
-U_BOOT_CMD(
-	sccinfo,	1,	1,	do_sccinfo,
-	"print SCC registers",
-	""
-);
-
-U_BOOT_CMD(
-	smcinfo,	1,	1,	do_smcinfo,
-	"print SMC registers",
-	""
-);
-
-U_BOOT_CMD(
-	spiinfo,	1,	1,	do_spiinfo,
-	"print Serial Peripheral Interface (SPI) registers",
-	""
-);
-
-U_BOOT_CMD(
-	muxinfo,	1,	1,	do_muxinfo,
-	"print CPM Multiplexing registers",
-	""
-);
-
-U_BOOT_CMD(
-	siinfo,	1,	1,	do_siinfo,
-	"print Serial Interface (SI) registers",
-	""
-);
-
-U_BOOT_CMD(
-	mccinfo,	1,	1,	do_mccinfo,
-	"print MCC registers",
-	""
-);
-
-#endif