diff options
| author | Peng Fan <peng.fan@nxp.com> | 2019-10-23 01:43:30 +0000 |
|---|---|---|
| committer | Peng Fan <peng.fan@nxp.com> | 2019-10-29 10:09:44 +0800 |
| commit | a335f80502131e9e2b58a0281f5fc78018295ea4 (patch) | |
| tree | 281802acf5f6939333c867fc05093b77ea5e9594 /common/spl | |
| parent | 5d336d1701567e5025c3010b325e633a677c30a2 (diff) | |
spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition
On i.MX8, when booting from eMMC boot partition, the whole flash.bin
is stored in boot partition, however SPL switches to user partition
during the init of mmc driver:
spl_mmc_load() -> mmc_init()
Then it tries to load the container image in
spl_mmc_get_uboot_raw_sector(), but here it reads the data from user
partition and the header is not recognized as a valid header.
So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch
to address this issue.
Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch
is not correct, so let's move it after eMMC partition switch.
Reported-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Diffstat (limited to 'common/spl')
| -rw-r--r-- | common/spl/spl_mmc.c | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 34e1e73d80..2ede096e61 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -343,8 +343,6 @@ int spl_mmc_load(struct spl_image_info *spl_image, } } - raw_sect = spl_mmc_get_uboot_raw_sector(mmc); - boot_mode = spl_boot_mode(bootdev->boot_device); err = -EINVAL; switch (boot_mode) { @@ -383,6 +381,9 @@ int spl_mmc_load(struct spl_image_info *spl_image, if (!err) return err; } + + raw_sect = spl_mmc_get_uboot_raw_sector(mmc); + #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION err = mmc_load_image_raw_partition(spl_image, mmc, raw_part, raw_sect); |