diff options
| author | Stefan Mavrodiev <stefan.mavrodiev@gmail.com> | 2016-09-02 15:21:37 +0300 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2016-09-03 10:33:44 +0200 |
| commit | ca5c37026be4ce984537569d7159f488a836afc8 (patch) | |
| tree | d6d8b7014304bc156007811cd6617bd62d82483e /configs/A33-OLinuXino_defconfig | |
| parent | 6d973ad9d2329ec43334304ecd2cb044e173d4c4 (diff) | |
sunxi: Add support for A33-OLinuXino board
A33-OLinuXino is A33 development board designed by Olimex LTD.
It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector,
headphone and mic jacks, connector for LiPo battery and optional
4GB NAND Flash.
It has two 40-pin headers. One for LCD panel, and one for
additional modules. Also there is CSI/DSI connector.
The dts files are identical to the ones submitted to the upstream kernel.
Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'configs/A33-OLinuXino_defconfig')
| -rw-r--r-- | configs/A33-OLinuXino_defconfig | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/configs/A33-OLinuXino_defconfig b/configs/A33-OLinuXino_defconfig new file mode 100644 index 0000000000..a175a40bad --- /dev/null +++ b/configs/A33-OLinuXino_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A33=y + +CONFIG_DRAM_CLK=432 +CONFIG_DRAM_ZQ=15291 +CONFIG_DRAM_ODT_EN=y + +CONFIG_MMC0_CD_PIN="PB4" +CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_AXP_GPIO=y +CONFIG_USB0_ID_DET="PB3" +CONFIG_USB_MUSB_HOST=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y + +CONFIG_VIDEO=y +# CONFIG_VIDEO_VGA_VIA_LCD is not set +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 +CONFIG_VIDEO_LCD_POWER="" +CONFIG_VIDEO_LCD_RESET="" +CONFIG_VIDEO_LCD_BL_EN="PB2" +CONFIG_VIDEO_LCD_BL_PWM="PH0" +CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=y + +CONFIG_AXP_DCDC1_VOLT=3300 |