diff options
| author | Rask Ingemann Lambertsen <rask@formelder.dk> | 2017-02-25 14:21:54 +0100 |
|---|---|---|
| committer | Jagan Teki <jagan@amarulasolutions.com> | 2017-04-07 11:23:46 +0530 |
| commit | 58c4020cf09a4bfc85dfeb2d0fa5ce41f359079f (patch) | |
| tree | c66619f10b54e1568d14962102d7fca40972f75c /configs/Sunchip_CX-A99_defconfig | |
| parent | ffe47eb72c56333e4bdeba885183a545adb45f57 (diff) | |
arm: sunxi: Add Sunchip CX-A99 initial support
The Sunchip CX-A99 is a board used in some media players. It features:
An Allwinner A80 ARM SoC (4 * Cortex-A7 + 4 * Cortex-A15 cores)
2 GiB or 4 GiB DDR3 DRAM
AXP808 PMIC
16 GB or 32 GB eMMC
SDIO Wifi/Bluetooth/FM module
SD card slot
1 USB 3.0 connector
2 USB 2.0 connectors
SATA connector
UART connector (internally) for serial console
Ethernet connector (10/100/1000 Mbit/s)
HDMI connector
Composite video and analog audio connector
S/PDIF connector
IR remote control receiver
This patch adds a defconfig for the board. The DRAM settings are as found
in the vendor sys_config.fex file.
It has a preliminary device tree for use until a device tree is accepted
upstream, after which it can be replaced by the upstream version.
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
[squash commits, and edited new meanful commit message]
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Diffstat (limited to 'configs/Sunchip_CX-A99_defconfig')
| -rw-r--r-- | configs/Sunchip_CX-A99_defconfig | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/configs/Sunchip_CX-A99_defconfig b/configs/Sunchip_CX-A99_defconfig new file mode 100644 index 0000000000..7530d7db20 --- /dev/null +++ b/configs/Sunchip_CX-A99_defconfig @@ -0,0 +1,22 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN9I=y +CONFIG_DRAM_CLK=600 +CONFIG_DRAM_ZQ=3881915 +CONFIG_DRAM_ODT_EN=y +CONFIG_MMC0_CD_PIN="PH17" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_USB0_VBUS_PIN="PH15" +CONFIG_USB0_VBUS_DET="" +CONFIG_USB0_ID_DET="" +CONFIG_USB1_VBUS_PIN="PL7" +CONFIG_USB3_VBUS_PIN="PL8" +CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cx-a99" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set |