summaryrefslogtreecommitdiff
path: root/configs/mx6memcal_defconfig
diff options
context:
space:
mode:
authorEric Nelson <eric@nelint.com>2018-01-18 07:47:32 -0700
committerStefano Babic <sbabic@denx.de>2018-02-04 12:00:58 +0100
commit0093b3fcd83a77b18be2f8d7833a597032df6fdf (patch)
treef73e16c17bbcd6eec82f36f87998520eceee4161 /configs/mx6memcal_defconfig
parentcc9467ef7edc1ac13b8ab7cba66f675202c0a3cb (diff)
mx6memcal: enable SDP support
The initial implementation of mx6memcal reset the CPU after running the memory calibration procedure because the generic board has no information about which boot devices are available. Now that we have SDP support in SPL, use it to allow a full U-Boot to be uploaded (i.e. to use "mtest"). Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Diffstat (limited to 'configs/mx6memcal_defconfig')
-rw-r--r--configs/mx6memcal_defconfig10
1 files changed, 10 insertions, 0 deletions
diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig
index b27330c589..d3720dccdb 100644
--- a/configs/mx6memcal_defconfig
+++ b/configs/mx6memcal_defconfig
@@ -8,6 +8,10 @@ CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,SPL,MX6QDL"
CONFIG_SPL=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_USBETH_SUPPORT=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_BOOTM is not set
@@ -29,4 +33,10 @@ CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_CACHE=y
# CONFIG_MMC is not set
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
CONFIG_REGEX=y