diff options
| author | Marek Vasut <marex@denx.de> | 2020-05-22 01:13:54 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2020-06-22 17:44:20 +0200 |
| commit | a1f6d04aa1f41f5ebcec95a37b4dc54b9c7f98c5 (patch) | |
| tree | b007e03f06f9d9280b9476674c9d60c3c2d2396b /configs/pico-hobbit-imx7d_defconfig | |
| parent | 720416031560b21e173306b5495d4757987115f8 (diff) | |
ARM: imx: soc: Select default TEXT_BASE for MX7
Select default U-Boot and SPL text base for the MX7 SoC. The U-Boot
text base is picked as the one used by various MX7 boards. The SPL
text base however is different.
The SPL text base is set to 0x912000 instead of the usual 0x911000,
that is because the 0x911000 value cannot work. Using 0x911000 as a
SPL text base will result in the DCD header being placed below the
0x911000 address, which is a reserved SRAM area which must not be
used. This will actually trigger eMMC boot failure on MX7D at least.
Hence the increment.
Update all boards affected by this SPL problem to the new SPL_TEXT_BASE.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Diffstat (limited to 'configs/pico-hobbit-imx7d_defconfig')
| -rw-r--r-- | configs/pico-hobbit-imx7d_defconfig | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig index 830fddeee9..d04b0d7dd6 100644 --- a/configs/pico-hobbit-imx7d_defconfig +++ b/configs/pico-hobbit-imx7d_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX7=y -CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y @@ -15,7 +14,6 @@ CONFIG_SPL=y CONFIG_ARMV7_BOOT_SEC_DEFAULT=y CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y -CONFIG_SPL_TEXT_BASE=0x00911000 CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" |