diff options
| author | Martyn Welch <martyn.welch@collabora.co.uk> | 2018-01-10 20:31:32 +0100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2018-02-04 12:00:58 +0100 |
| commit | 6d6564957ced9a29ca62adee68a6e24040dd54be (patch) | |
| tree | a12113e64caee0a7c072657bced15d3533a81aa4 /configs/sama5d3xek_nandflash_defconfig | |
| parent | 2850645cabef6d401415a9787736d642017ec3f5 (diff) | |
board: ge: bx50v3: Enable hardware watchdog
Enable the hardware watchdog on bx50v3 to cause it to reset in the event
the board hangs.
Configure GPIO_9 pin as WDOG1_B so that a watchdog timeout results in a
full system reset.
The watchdog is used and reconfigured by systemd approximately 1.7 seconds
into boot. Adding a few seconds for U-Boot and a few more seconds as a
safety margin.
Note that the PCIe controller is _not_ put back into a safe state prior
to board reset. This is a problem if board reset is implemented as CPU
reset.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Diffstat (limited to 'configs/sama5d3xek_nandflash_defconfig')
0 files changed, 0 insertions, 0 deletions