diff options
| author | Jelle de Jong <jelledejong@powercraft.nl> | 2015-10-18 16:34:13 +0200 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2015-11-22 11:43:58 +0100 |
| commit | aa56cb374de8ae83f3280fdd6c280724228b86d7 (patch) | |
| tree | ac5a696241c0bd0d01022e71759cc7ec1c415c6a /configs | |
| parent | 7e17fd26539417219e937e9f4eba491a23f83234 (diff) | |
sunxi: Add support for the Lamobo R1 board
The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such
on the PCB, is meant as a A20 based router board. As such the board comes
with a built-in switch chip giving it 5 gigabit ethernet ports, and it
has a large empty area on the pcb with mounting holes which will fit a
2.5 inch harddisk. To complete its networking features it has a
Realtek RTL8192CU for WiFi 802.11 b/g/n.
The dts file is identical to the one submitted upstream.
Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'configs')
| -rw-r--r-- | configs/Lamobo_R1_defconfig | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig new file mode 100644 index 0000000000..d460c3270b --- /dev/null +++ b/configs/Lamobo_R1_defconfig @@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=432 +CONFIG_MMC0_CD_PIN="PH10" +CONFIG_GMAC_TX_DELAY=4 +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,SATAPWR=SUNXI_GPB(3)" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_USB_EHCI_HCD=y |