diff options
| author | roy zang <tie-fei.zang@freescale.com> | 2006-11-02 18:49:51 +0800 |
|---|---|---|
| committer | Zang Tiefei <roy@bus.ap.freescale.net> | 2006-11-02 18:49:51 +0800 |
| commit | 4c52783b3d024e153c4972b97332e314bc3bdc46 (patch) | |
| tree | ffc40c217c1b6b32e47837edaa0981f6e62403f5 /cpu/74xx_7xx/cpu_init.c | |
| parent | 69366bf42f22d67efce8da3f8c40a43d4a3c2695 (diff) | |
General code modification for mpc7448hpc2 board support.
1. Add 7447A and 7448 processor support.
2. Add the following flags.
CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
(such as by switch on board), this flag should be set.
CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
relocates to RAM, this flag should be set.
CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
system hang in exception, this flag should be set.
There is a design issue for tsi108/109 pci configure read. When pci scan
the slots, if there is no pci card, the tsi108/9 will cause a machine
check exception for mpc7448 processor.
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Diffstat (limited to 'cpu/74xx_7xx/cpu_init.c')
| -rw-r--r-- | cpu/74xx_7xx/cpu_init.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c index 93f180f267..1dd1b2cd84 100644 --- a/cpu/74xx_7xx/cpu_init.c +++ b/cpu/74xx_7xx/cpu_init.c @@ -43,6 +43,8 @@ cpu_init_f (void) case CPU_7450: case CPU_7455: case CPU_7457: + case CPU_7447A: + case CPU_7448: /* enable the timebase bit in HID0 */ set_hid0(get_hid0() | 0x4000000); break; |