rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

6 files changed, 20 insertions, 20 deletions

diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 60c1aa90b6..5ac8f59ab3 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -41,7 +41,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index 9854016d43..39ed345bb7 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -95,7 +95,7 @@ static void timer_isr( void *data) {
 	unsigned int *pTime = (unsigned int *)data;
 
 	(*pTime)++;
-	if ( !(*pTime % (CFG_HZ/4))) {
+	if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
 		/* toggle LED 0 */
 		PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
 	}
@@ -118,7 +118,7 @@ int interrupt_init (void)
 	IRQEN = 0;
 
 	/* operate timer 2 in non-prescale mode */
-	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CFG_HZ) |
+	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
 		    NETARM_GEN_TCTL_ENABLE |
 		    NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
 
@@ -166,9 +166,9 @@ int interrupt_init (void)
 
 	/*
 	 * Load Timer data register with count down value.
-	 * count_down_val = CFG_SYS_CLK_FREQ/CFG_HZ
+	 * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
 	 */
-	PUT_REG( REG_TDATA0, (CFG_SYS_CLK_FREQ / CFG_HZ));
+	PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
 
 	/*
 	 * Enable global interrupt
@@ -181,7 +181,7 @@ int interrupt_init (void)
 #elif defined(CONFIG_LPC2292)
 	PUT32(T0IR, 0);		/* disable all timer0 interrupts */
 	PUT32(T0TCR, 0);	/* disable timer0 */
-	PUT32(T0PR, CFG_SYS_CLK_FREQ / CFG_HZ);
+	PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
 	PUT32(T0MCR, 0);
 	PUT32(T0TC, 0);
 	PUT32(T0TCR, 1);	/* enable timer0 */
@@ -223,7 +223,7 @@ void udelay (unsigned long usec)
 	ulong tmo;
 
 	tmo = usec / 1000;
-	tmo *= CFG_HZ;
+	tmo *= CONFIG_SYS_HZ;
 	tmo /= 1000;
 
 	tmo += get_timer (0);
@@ -268,10 +268,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 1000;
 	} else {
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -294,7 +294,7 @@ void udelay (unsigned long usec)
 {
 	u32 ticks;
 
-	ticks = (usec * CFG_HZ) / 1000000;
+	ticks = (usec * CONFIG_SYS_HZ) / 1000000;
 
 	ticks += get_timer (0);
 
diff --git a/cpu/arm720t/lpc2292/flash.c b/cpu/arm720t/lpc2292/flash.c
index e5c869722d..3d2dc32231 100644
--- a/cpu/arm720t/lpc2292/flash.c
+++ b/cpu/arm720t/lpc2292/flash.c
@@ -85,7 +85,7 @@ int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
 	command[1] = flash_addr;
 	command[2] = COPY_BUFFER_LOCATION;
 	command[3] = 512;
-	command[4] = CFG_SYS_CLK_FREQ >> 10;
+	command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
 	iap_entry(command, result);
 	if (result[0] != IAP_RET_CMD_SUCCESS) {
 		printf("IAP copy failed\n");
@@ -132,7 +132,7 @@ int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last)
 	command[0] = IAP_CMD_ERASE;
 	command[1] = s_first;
 	command[2] = s_last;
-	command[3] = CFG_SYS_CLK_FREQ >> 10;
+	command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
 	iap_entry(command, result);
 	if (result[0] != IAP_RET_CMD_SUCCESS) {
 		printf("IAP erase failed\n");
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index 1b0e147e16..54a9b3137b 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -85,7 +85,7 @@ void serial_putc (const char c)
 	if (c == '\n')
 		serial_putc ('\r');
 
-	tmo = get_timer (0) + 1 * CFG_HZ;
+	tmo = get_timer (0) + 1 * CONFIG_SYS_HZ;
 	while (IO_SYSFLG1 & SYSFLG1_UTXFF)
 		if (get_timer (0) > tmo)
 			break;
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
index a593cbc32f..1a1b2dbd4f 100644
--- a/cpu/arm720t/serial_netarm.c
+++ b/cpu/arm720t/serial_netarm.c
@@ -46,7 +46,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* wait until transmitter is ready for another character */
 #define TXWAITRDY(registers)							\
 {										\
-	ulong tmo = get_timer(0) + 1 * CFG_HZ;					\
+	ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ;					\
 	while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 )	{	\
 		if (get_timer(0) > tmo)						\
 			break;							\
diff --git a/cpu/arm720t/start.S b/cpu/arm720t/start.S
index 8423e4f68d..022b873e35 100644
--- a/cpu/arm720t/start.S
+++ b/cpu/arm720t/start.S
@@ -166,8 +166,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
@@ -444,8 +444,8 @@ lock_loop:
 	add	r8, sp, #S_PC
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 	ldmia	r2, {r2 - r4}			@ get pc, cpsr, old_r0
 	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
 
@@ -477,8 +477,8 @@ lock_loop:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr