rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

5 files changed, 12 insertions, 12 deletions

diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c
index 90f95df18a..b68c5dd826 100644
--- a/cpu/arm920t/at91rm9200/i2c.c
+++ b/cpu/arm920t/at91rm9200/i2c.c
@@ -120,7 +120,7 @@ int
 i2c_read (unsigned char chip, unsigned int addr, int alen,
 	  unsigned char *buffer, int len)
 {
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	/* we only allow one address byte */
 	if (alen > 1)
 		return 1;
@@ -139,7 +139,7 @@ int
 i2c_write(unsigned char chip, unsigned int addr, int alen,
 	  unsigned char *buffer, int len)
 {
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
 	int i;
 	unsigned char *buf;
 
@@ -210,7 +210,7 @@ int i2c_set_bus_speed(unsigned int speed)
 
 unsigned int i2c_get_bus_speed(void)
 {
-	return CFG_I2C_SPEED;
+	return CONFIG_SYS_I2C_SPEED;
 }
 
 #endif /* CONFIG_HARD_I2C */
diff --git a/cpu/arm920t/at91rm9200/interrupts.c b/cpu/arm920t/at91rm9200/interrupts.c
index 10546027f8..5f0703c2de 100644
--- a/cpu/arm920t/at91rm9200/interrupts.c
+++ b/cpu/arm920t/at91rm9200/interrupts.c
@@ -35,8 +35,8 @@
 #include <asm/arch/hardware.h>
 /*#include <asm/proc/ptrace.h>*/
 
-/* the number of clocks per CFG_HZ */
-#define TIMER_LOAD_VAL (CFG_HZ_CLOCK/CFG_HZ)
+/* the number of clocks per CONFIG_SYS_HZ */
+#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
 
 /* macro to read the 16 bit timer */
 #define READ_TIMER (tmr->TC_CV & 0x0000ffff)
@@ -126,7 +126,7 @@ void udelay_masked (unsigned long usec)
 	ulong endtime;
 	signed long diff;
 
-	tmo = CFG_HZ_CLOCK / 1000;
+	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
 	tmo *= usec;
 	tmo /= 1000;
 
@@ -155,7 +155,7 @@ ulong get_tbclk (void)
 {
 	ulong tbclk;
 
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
 
diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S
index 98363eb400..66b07da08b 100644
--- a/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ b/cpu/arm920t/at91rm9200/lowlevel_init.S
@@ -79,7 +79,7 @@ lowlevel_init:
 	/* Get the CKGR Base Address */
 	ldr     r1, =AT91C_BASE_CKGR
 	/* Main oscillator Enable register */
-#ifdef CFG_USE_MAIN_OSCILLATOR
+#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
 	ldr     r0, =0x0000FF01		/* Enable main oscillator,  OSCOUNT = 0xFF */
 #else
 	ldr     r0, =0x0000FF00		/* Disable main oscillator, OSCOUNT = 0xFF */
diff --git a/cpu/arm920t/at91rm9200/spi.c b/cpu/arm920t/at91rm9200/spi.c
index 265d18525f..f3cb5d8c2c 100644
--- a/cpu/arm920t/at91rm9200/spi.c
+++ b/cpu/arm920t/at91rm9200/spi.c
@@ -137,11 +137,11 @@ unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
 
 	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
 	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
-		((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
+		((timeout = get_timer_masked() ) < CONFIG_SYS_SPI_WRITE_TOUT));
 	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
 	pDesc->state = IDLE;
 
-	if (timeout >= CFG_SPI_WRITE_TOUT){
+	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT){
 		printf("Error Timeout\n\r");
 		return DATAFLASH_ERROR;
 	}
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
index c121de6328..72355dcf9a 100644
--- a/cpu/arm920t/at91rm9200/usb.c
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 # ifdef CONFIG_AT91RM9200
 
 #include <asm/arch/hardware.h>
@@ -50,4 +50,4 @@ int usb_cpu_init_fail(void)
 }
 
 # endif /* CONFIG_AT91RM9200 */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */