avr32: Move cpu/at32ap/* to arch/avr32/cpu/*

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

4 files changed, 0 insertions, 639 deletions

diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
deleted file mode 100644
index 46e6ef661a..0000000000
--- a/cpu/at32ap/at32ap700x/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2005-2006 Atmel Corporation
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	:= $(obj)lib$(SOC).a
-
-COBJS	:= portmux.o clk.o
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
deleted file mode 100644
index 742bc6b5a2..0000000000
--- a/cpu/at32ap/at32ap700x/clk.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright (C) 2005-2008 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/clk.h>
-#include <asm/arch/memory-map.h>
-#include <asm/arch/portmux.h>
-
-#include "sm.h"
-
-void clk_init(void)
-{
-	uint32_t cksel;
-
-	/* in case of soft resets, disable watchdog */
-	sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
-	sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
-
-#ifdef CONFIG_PLL
-	/* Initialize the PLL */
-	sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CONFIG_SYS_PLL0_SUPPRESS_CYCLES)
-			    | SM_BF(PLLMUL, CONFIG_SYS_PLL0_MUL - 1)
-			    | SM_BF(PLLDIV, CONFIG_SYS_PLL0_DIV - 1)
-			    | SM_BF(PLLOPT, CONFIG_SYS_PLL0_OPT)
-			    | SM_BF(PLLOSC, 0)
-			    | SM_BIT(PLLEN)));
-
-	/* Wait for lock */
-	while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
-#endif
-
-	/* Set up clocks for the CPU and all peripheral buses */
-	cksel = 0;
-	if (CONFIG_SYS_CLKDIV_CPU)
-		cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CONFIG_SYS_CLKDIV_CPU - 1);
-	if (CONFIG_SYS_CLKDIV_HSB)
-		cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CONFIG_SYS_CLKDIV_HSB - 1);
-	if (CONFIG_SYS_CLKDIV_PBA)
-		cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CONFIG_SYS_CLKDIV_PBA - 1);
-	if (CONFIG_SYS_CLKDIV_PBB)
-		cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CONFIG_SYS_CLKDIV_PBB - 1);
-	sm_writel(PM_CKSEL, cksel);
-
-#ifdef CONFIG_PLL
-	/* Use PLL0 as main clock */
-	sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
-
-#ifdef CONFIG_LCD
-	/* Set up pixel clock for the LCDC */
-	sm_writel(PM_GCCTRL(7), SM_BIT(PLLSEL) | SM_BIT(CEN));
-#endif
-#endif
-}
-
-unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
-		unsigned long rate, unsigned long parent_rate)
-{
-	unsigned long divider;
-
-	if (rate == 0 || parent_rate == 0) {
-		sm_writel(PM_GCCTRL(id), 0);
-		return 0;
-	}
-
-	divider = (parent_rate + rate / 2) / rate;
-	if (divider <= 1) {
-		sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN));
-		rate = parent_rate;
-	} else {
-		divider = min(255, divider / 2 - 1);
-		sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN)
-				| SM_BF(DIV, divider));
-		rate = parent_rate / (2 * (divider + 1));
-	}
-
-	return rate;
-}
diff --git a/cpu/at32ap/at32ap700x/portmux.c b/cpu/at32ap/at32ap700x/portmux.c
deleted file mode 100644
index b1f2c6f1ff..0000000000
--- a/cpu/at32ap/at32ap700x/portmux.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Copyright (C) 2006, 2008 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/chip-features.h>
-#include <asm/arch/memory-map.h>
-#include <asm/arch/portmux.h>
-
-/*
- * Lots of small functions here. We depend on --gc-sections getting
- * rid of the ones we don't need.
- */
-void portmux_enable_ebi(unsigned int bus_width, unsigned int addr_width,
-		unsigned long flags, unsigned long drive_strength)
-{
-	unsigned long porte_mask = 0;
-
-	if (bus_width > 16)
-		portmux_select_peripheral(PORTMUX_PORT_E, 0xffff,
-				PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
-	if (addr_width > 23)
-		porte_mask |= (((1 << (addr_width - 23)) - 1) & 7) << 16;
-	if (flags & PORTMUX_EBI_CS(2))
-		porte_mask |= 1 << 25;
-	if (flags & PORTMUX_EBI_CS(4))
-		porte_mask |= 1 << 21;
-	if (flags & PORTMUX_EBI_CS(5))
-		porte_mask |= 1 << 22;
-	if (flags & (PORTMUX_EBI_CF(0) | PORTMUX_EBI_CF(1)))
-		porte_mask |= (1 << 19) | (1 << 20) | (1 << 23);
-
-	portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
-			PORTMUX_FUNC_A, 0);
-
-	if (flags & PORTMUX_EBI_NWAIT)
-		portmux_select_peripheral(PORTMUX_PORT_E, 1 << 24,
-				PORTMUX_FUNC_A, PORTMUX_PULL_UP);
-}
-
-#ifdef AT32AP700x_CHIP_HAS_MACB
-void portmux_enable_macb0(unsigned long flags, unsigned long drive_strength)
-{
-	unsigned long portc_mask;
-
-	portc_mask = (1 << 3)	/* TXD0	*/
-		| (1 << 4)	/* TXD1	*/
-		| (1 << 7)	/* TXEN	*/
-		| (1 << 8)	/* TXCK */
-		| (1 << 9)	/* RXD0	*/
-		| (1 << 10)	/* RXD1	*/
-		| (1 << 13)	/* RXER	*/
-		| (1 << 15)	/* RXDV	*/
-		| (1 << 16)	/* MDC	*/
-		| (1 << 17);	/* MDIO	*/
-
-	if (flags & PORTMUX_MACB_MII)
-		portc_mask |= (1 << 0)	/* COL	*/
-			| (1 << 1)	/* CRS	*/
-			| (1 << 2)	/* TXER	*/
-			| (1 << 5)	/* TXD2	*/
-			| (1 << 6)	/* TXD3 */
-			| (1 << 11)	/* RXD2	*/
-			| (1 << 12)	/* RXD3	*/
-			| (1 << 14);	/* RXCK	*/
-
-	if (flags & PORTMUX_MACB_SPEED)
-		portc_mask |= (1 << 18);/* SPD	*/
-
-	/* REVISIT: Some pins are probably pure outputs */
-	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
-			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
-}
-
-void portmux_enable_macb1(unsigned long flags, unsigned long drive_strength)
-{
-	unsigned long portc_mask = 0;
-	unsigned long portd_mask;
-
-	portd_mask = (1 << 13)	/* TXD0	*/
-		| (1 << 14)	/* TXD1	*/
-		| (1 << 11)	/* TXEN	*/
-		| (1 << 12)	/* TXCK */
-		| (1 << 10)	/* RXD0	*/
-		| (1 << 6)	/* RXD1	*/
-		| (1 << 5)	/* RXER	*/
-		| (1 << 4)	/* RXDV	*/
-		| (1 << 3)	/* MDC	*/
-		| (1 << 2);	/* MDIO	*/
-
-	if (flags & PORTMUX_MACB_MII)
-		portc_mask = (1 << 19)	/* COL	*/
-			| (1 << 23)	/* CRS	*/
-			| (1 << 26)	/* TXER	*/
-			| (1 << 27)	/* TXD2	*/
-			| (1 << 28)	/* TXD3 */
-			| (1 << 29)	/* RXD2	*/
-			| (1 << 30)	/* RXD3	*/
-			| (1 << 24);	/* RXCK	*/
-
-	if (flags & PORTMUX_MACB_SPEED)
-		portd_mask |= (1 << 15);/* SPD	*/
-
-	/* REVISIT: Some pins are probably pure outputs */
-	portmux_select_peripheral(PORTMUX_PORT_D, portc_mask,
-			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
-	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
-			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_MMCI
-void portmux_enable_mmci(unsigned int slot, unsigned long flags,
-		unsigned long drive_strength)
-{
-	unsigned long mask;
-	unsigned long portmux_flags = PORTMUX_PULL_UP;
-
-	/* First, the common CLK signal. It doesn't need a pull-up */
-	portmux_select_peripheral(PORTMUX_PORT_A, 1 << 10,
-			PORTMUX_FUNC_A, 0);
-
-	if (flags & PORTMUX_MMCI_EXT_PULLUP)
-		portmux_flags = 0;
-
-	/* Then, the per-slot signals */
-	switch (slot) {
-	case 0:
-		mask = (1 << 11) | (1 << 12);	/* CMD and DATA0 */
-		if (flags & PORTMUX_MMCI_4BIT)
-			/* DATA1..DATA3 */
-			mask |= (1 << 13) | (1 << 14) | (1 << 15);
-		portmux_select_peripheral(PORTMUX_PORT_A, mask,
-				PORTMUX_FUNC_A, portmux_flags);
-		break;
-	case 1:
-		mask = (1 << 6) | (1 << 7);	/* CMD and DATA0 */
-		if (flags & PORTMUX_MMCI_4BIT)
-			/* DATA1..DATA3 */
-			mask |= (1 << 8) | (1 << 9) | (1 << 10);
-		portmux_select_peripheral(PORTMUX_PORT_B, mask,
-				PORTMUX_FUNC_B, portmux_flags);
-		break;
-	}
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_SPI
-void portmux_enable_spi0(unsigned long cs_mask, unsigned long drive_strength)
-{
-	unsigned long pin_mask;
-
-	/* MOSI and SCK */
-	portmux_select_peripheral(PORTMUX_PORT_A, (1 << 1) | (1 << 2),
-			PORTMUX_FUNC_A, 0);
-	/* MISO may float */
-	portmux_select_peripheral(PORTMUX_PORT_A, 1 << 0,
-			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
-
-	/* Set up NPCSx as GPIO outputs, initially high */
-	pin_mask = (cs_mask & 7) << 3;
-	if (cs_mask & (1 << 3))
-		pin_mask |= 1 << 20;
-
-	portmux_select_gpio(PORTMUX_PORT_A, pin_mask,
-			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
-}
-
-void portmux_enable_spi1(unsigned long cs_mask, unsigned long drive_strength)
-{
-	/* MOSI and SCK */
-	portmux_select_peripheral(PORTMUX_PORT_B, (1 << 1) | (1 << 5),
-			PORTMUX_FUNC_B, 0);
-	/* MISO may float */
-	portmux_select_peripheral(PORTMUX_PORT_B, 1 << 0,
-			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
-
-	/* Set up NPCSx as GPIO outputs, initially high */
-	portmux_select_gpio(PORTMUX_PORT_B, (cs_mask & 7) << 2,
-			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
-	portmux_select_gpio(PORTMUX_PORT_A, (cs_mask & 8) << (27 - 3),
-			PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH);
-}
-#endif
-
-#ifdef AT32AP700x_CHIP_HAS_LCDC
-void portmux_enable_lcdc(int pin_config)
-{
-	unsigned long portc_mask = 0;
-	unsigned long portd_mask = 0;
-	unsigned long porte_mask = 0;
-
-	switch (pin_config) {
-	case 0:
-		portc_mask = (1 << 19)	/* CC     */
-			| (1 << 20)	/* HSYNC  */
-			| (1 << 21)	/* PCLK   */
-			| (1 << 22)	/* VSYNC  */
-			| (1 << 23)	/* DVAL   */
-			| (1 << 24)	/* MODE   */
-			| (1 << 25)	/* PWR    */
-			| (1 << 26)	/* DATA0  */
-			| (1 << 27)	/* DATA1  */
-			| (1 << 28)	/* DATA2  */
-			| (1 << 29)	/* DATA3  */
-			| (1 << 30)	/* DATA4  */
-			| (1 << 31);	/* DATA5  */
-
-		portd_mask = (1 << 0)	/* DATA6  */
-			| (1 << 1)	/* DATA7  */
-			| (1 << 2)	/* DATA8  */
-			| (1 << 3)	/* DATA9  */
-			| (1 << 4)	/* DATA10 */
-			| (1 << 5)	/* DATA11 */
-			| (1 << 6)	/* DATA12 */
-			| (1 << 7)	/* DATA13 */
-			| (1 << 8)	/* DATA14 */
-			| (1 << 9)	/* DATA15 */
-			| (1 << 10)	/* DATA16 */
-			| (1 << 11)	/* DATA17 */
-			| (1 << 12)	/* DATA18 */
-			| (1 << 13)	/* DATA19 */
-			| (1 << 14)	/* DATA20 */
-			| (1 << 15)	/* DATA21 */
-			| (1 << 16)	/* DATA22 */
-			| (1 << 17);	/* DATA23 */
-		break;
-
-	case 1:
-		portc_mask = (1 << 20)	/* HSYNC  */
-			| (1 << 21)	/* PCLK   */
-			| (1 << 22)	/* VSYNC  */
-			| (1 << 25)	/* PWR    */
-			| (1 << 31);	/* DATA5  */
-
-		portd_mask = (1 << 0)	/* DATA6  */
-			| (1 << 1)	/* DATA7  */
-			| (1 << 7)	/* DATA13 */
-			| (1 << 8)	/* DATA14 */
-			| (1 << 9)	/* DATA15 */
-			| (1 << 16)	/* DATA22 */
-			| (1 << 17);	/* DATA23 */
-
-		porte_mask = (1 << 0)	/* CC     */
-			| (1 << 1)	/* DVAL   */
-			| (1 << 2)	/* MODE   */
-			| (1 << 3)	/* DATA0  */
-			| (1 << 4)	/* DATA1  */
-			| (1 << 5)	/* DATA2  */
-			| (1 << 6)	/* DATA3  */
-			| (1 << 7)	/* DATA4  */
-			| (1 << 8)	/* DATA8  */
-			| (1 << 9)	/* DATA9  */
-			| (1 << 10)	/* DATA10 */
-			| (1 << 11)	/* DATA11 */
-			| (1 << 12)	/* DATA12 */
-			| (1 << 13)	/* DATA16 */
-			| (1 << 14)	/* DATA17 */
-			| (1 << 15)	/* DATA18 */
-			| (1 << 16)	/* DATA19 */
-			| (1 << 17)	/* DATA20 */
-			| (1 << 18);	/* DATA21 */
-		break;
-	}
-
-	/* REVISIT: Some pins are probably pure outputs */
-	portmux_select_peripheral(PORTMUX_PORT_C, portc_mask,
-			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
-	portmux_select_peripheral(PORTMUX_PORT_D, portd_mask,
-			PORTMUX_FUNC_A, PORTMUX_BUSKEEPER);
-	portmux_select_peripheral(PORTMUX_PORT_E, porte_mask,
-			PORTMUX_FUNC_B, PORTMUX_BUSKEEPER);
-}
-#endif
diff --git a/cpu/at32ap/at32ap700x/sm.h b/cpu/at32ap/at32ap700x/sm.h
deleted file mode 100644
index b6e4409b22..0000000000
--- a/cpu/at32ap/at32ap700x/sm.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Register definitions for System Manager
- */
-#ifndef __CPU_AT32AP_SM_H__
-#define __CPU_AT32AP_SM_H__
-
-/* SM register offsets */
-#define SM_PM_MCCTRL				0x0000
-#define SM_PM_CKSEL				0x0004
-#define SM_PM_CPU_MASK				0x0008
-#define SM_PM_HSB_MASK				0x000c
-#define SM_PM_PBA_MASK				0x0010
-#define SM_PM_PBB_MASK				0x0014
-#define SM_PM_PLL0				0x0020
-#define SM_PM_PLL1				0x0024
-#define SM_PM_VCTRL				0x0030
-#define SM_PM_VMREF				0x0034
-#define SM_PM_VMV				0x0038
-#define SM_PM_IER				0x0040
-#define SM_PM_IDR				0x0044
-#define SM_PM_IMR				0x0048
-#define SM_PM_ISR				0x004c
-#define SM_PM_ICR				0x0050
-#define SM_PM_GCCTRL(x)				(0x0060 + 4 * x)
-#define SM_RTC_CTRL				0x0080
-#define SM_RTC_VAL				0x0084
-#define SM_RTC_TOP				0x0088
-#define SM_RTC_IER				0x0090
-#define SM_RTC_IDR				0x0094
-#define SM_RTC_IMR				0x0098
-#define SM_RTC_ISR				0x009c
-#define SM_RTC_ICR				0x00a0
-#define SM_WDT_CTRL				0x00b0
-#define SM_WDT_CLR				0x00b4
-#define SM_WDT_EXT				0x00b8
-#define SM_RC_RCAUSE				0x00c0
-#define SM_EIM_IER				0x0100
-#define SM_EIM_IDR				0x0104
-#define SM_EIM_IMR				0x0108
-#define SM_EIM_ISR				0x010c
-#define SM_EIM_ICR				0x0110
-#define SM_EIM_MODE				0x0114
-#define SM_EIM_EDGE				0x0118
-#define SM_EIM_LEVEL				0x011c
-#define SM_EIM_TEST				0x0120
-#define SM_EIM_NMIC				0x0124
-
-/* Bitfields in PM_CKSEL */
-#define SM_CPUSEL_OFFSET			0
-#define SM_CPUSEL_SIZE				3
-#define SM_CPUDIV_OFFSET			7
-#define SM_CPUDIV_SIZE				1
-#define SM_HSBSEL_OFFSET			8
-#define SM_HSBSEL_SIZE				3
-#define SM_HSBDIV_OFFSET			15
-#define SM_HSBDIV_SIZE				1
-#define SM_PBASEL_OFFSET			16
-#define SM_PBASEL_SIZE				3
-#define SM_PBADIV_OFFSET			23
-#define SM_PBADIV_SIZE				1
-#define SM_PBBSEL_OFFSET			24
-#define SM_PBBSEL_SIZE				3
-#define SM_PBBDIV_OFFSET			31
-#define SM_PBBDIV_SIZE				1
-
-/* Bitfields in PM_PLL0 */
-#define SM_PLLEN_OFFSET				0
-#define SM_PLLEN_SIZE				1
-#define SM_PLLOSC_OFFSET			1
-#define SM_PLLOSC_SIZE				1
-#define SM_PLLOPT_OFFSET			2
-#define SM_PLLOPT_SIZE				3
-#define SM_PLLDIV_OFFSET			8
-#define SM_PLLDIV_SIZE				8
-#define SM_PLLMUL_OFFSET			16
-#define SM_PLLMUL_SIZE				8
-#define SM_PLLCOUNT_OFFSET			24
-#define SM_PLLCOUNT_SIZE			6
-#define SM_PLLTEST_OFFSET			31
-#define SM_PLLTEST_SIZE				1
-
-/* Bitfields in PM_VCTRL */
-#define SM_VAUTO_OFFSET				0
-#define SM_VAUTO_SIZE				1
-#define SM_PM_VCTRL_VAL_OFFSET			8
-#define SM_PM_VCTRL_VAL_SIZE			7
-
-/* Bitfields in PM_VMREF */
-#define SM_REFSEL_OFFSET			0
-#define SM_REFSEL_SIZE				4
-
-/* Bitfields in PM_VMV */
-#define SM_PM_VMV_VAL_OFFSET			0
-#define SM_PM_VMV_VAL_SIZE			8
-
-/* Bitfields in PM_ICR */
-#define SM_LOCK0_OFFSET				0
-#define SM_LOCK0_SIZE				1
-#define SM_LOCK1_OFFSET				1
-#define SM_LOCK1_SIZE				1
-#define SM_WAKE_OFFSET				2
-#define SM_WAKE_SIZE				1
-#define SM_VOK_OFFSET				3
-#define SM_VOK_SIZE				1
-#define SM_VMRDY_OFFSET				4
-#define SM_VMRDY_SIZE				1
-#define SM_CKRDY_OFFSET				5
-#define SM_CKRDY_SIZE				1
-
-/* Bitfields in PM_GCCTRL */
-#define SM_OSCSEL_OFFSET			0
-#define SM_OSCSEL_SIZE				1
-#define SM_PLLSEL_OFFSET			1
-#define SM_PLLSEL_SIZE				1
-#define SM_CEN_OFFSET				2
-#define SM_CEN_SIZE				1
-#define SM_CPC_OFFSET				3
-#define SM_CPC_SIZE				1
-#define SM_DIVEN_OFFSET				4
-#define SM_DIVEN_SIZE				1
-#define SM_DIV_OFFSET				8
-#define SM_DIV_SIZE				8
-
-/* Bitfields in RTC_CTRL */
-#define SM_PCLR_OFFSET				1
-#define SM_PCLR_SIZE				1
-#define SM_TOPEN_OFFSET				2
-#define SM_TOPEN_SIZE				1
-#define SM_CLKEN_OFFSET				3
-#define SM_CLKEN_SIZE				1
-#define SM_PSEL_OFFSET				8
-#define SM_PSEL_SIZE				16
-
-/* Bitfields in RTC_VAL */
-#define SM_RTC_VAL_VAL_OFFSET			0
-#define SM_RTC_VAL_VAL_SIZE			31
-
-/* Bitfields in RTC_TOP */
-#define SM_RTC_TOP_VAL_OFFSET			0
-#define SM_RTC_TOP_VAL_SIZE			32
-
-/* Bitfields in RTC_ICR */
-#define SM_TOPI_OFFSET				0
-#define SM_TOPI_SIZE				1
-
-/* Bitfields in WDT_CTRL */
-#define SM_KEY_OFFSET				24
-#define SM_KEY_SIZE				8
-
-/* Bitfields in RC_RCAUSE */
-#define SM_POR_OFFSET				0
-#define SM_POR_SIZE				1
-#define SM_BOD_OFFSET				1
-#define SM_BOD_SIZE				1
-#define SM_EXT_OFFSET				2
-#define SM_EXT_SIZE				1
-#define SM_WDT_OFFSET				3
-#define SM_WDT_SIZE				1
-#define SM_NTAE_OFFSET				4
-#define SM_NTAE_SIZE				1
-#define SM_SERP_OFFSET				5
-#define SM_SERP_SIZE				1
-
-/* Bitfields in EIM_EDGE */
-#define SM_INT0_OFFSET				0
-#define SM_INT0_SIZE				1
-#define SM_INT1_OFFSET				1
-#define SM_INT1_SIZE				1
-#define SM_INT2_OFFSET				2
-#define SM_INT2_SIZE				1
-#define SM_INT3_OFFSET				3
-#define SM_INT3_SIZE				1
-
-/* Bitfields in EIM_LEVEL */
-
-/* Bitfields in EIM_TEST */
-#define SM_TESTEN_OFFSET			31
-#define SM_TESTEN_SIZE				1
-
-/* Bitfields in EIM_NMIC */
-#define SM_EN_OFFSET				0
-#define SM_EN_SIZE				1
-
-/* Bit manipulation macros */
-#define SM_BIT(name)					\
-	(1 << SM_##name##_OFFSET)
-#define SM_BF(name,value)				\
-	(((value) & ((1 << SM_##name##_SIZE) - 1))	\
-	 << SM_##name##_OFFSET)
-#define SM_BFEXT(name,value)				\
-	(((value) >> SM_##name##_OFFSET)		\
-	 & ((1 << SM_##name##_SIZE) - 1))
-#define SM_BFINS(name,value,old)			\
-	(((old) & ~(((1 << SM_##name##_SIZE) - 1)	\
-		    << SM_##name##_OFFSET))		\
-	 | SM_BF(name,value))
-
-/* Register access macros */
-#define sm_readl(reg)					\
-	readl((void *)SM_BASE + SM_##reg)
-#define sm_writel(reg,value)				\
-	writel((value), (void *)SM_BASE + SM_##reg)
-
-#endif /* __CPU_AT32AP_SM_H__ */