diff options
author | Heiko Schocher <hs@pollux.denx.de> | 2006-04-20 08:42:42 +0200 |
---|---|---|
committer | Heiko Schocher <hs@pollux.denx.de> | 2006-04-20 08:42:42 +0200 |
commit | 9acb626fc145e7327f94fd77f927dce08dd978a8 (patch) | |
tree | 8597a60515c10ec608ad756699460226ccb63343 /cpu/mcf52x2 | |
parent | 8419c013048b1f15f3fa2fc7c0463d860a04ee3e (diff) |
Add MCF5282 support (without preloader)
relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005
Diffstat (limited to 'cpu/mcf52x2')
-rw-r--r-- | cpu/mcf52x2/cpu.c | 27 | ||||
-rw-r--r-- | cpu/mcf52x2/cpu_init.c | 177 | ||||
-rw-r--r-- | cpu/mcf52x2/fec.c | 27 | ||||
-rw-r--r-- | cpu/mcf52x2/serial.c | 39 | ||||
-rw-r--r-- | cpu/mcf52x2/start.S | 96 |
5 files changed, 334 insertions, 32 deletions
diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index 32a524f7e7..8795bcccff 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -2,6 +2,10 @@ * (C) Copyright 2003 * Josef Baumgartner <josef.baumgartner@telex.de> * + * MCF5282 additionals + * (C) Copyright 2005 + * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de> + * * See file CREDITS for list of people who contributed to this * project. * @@ -31,7 +35,8 @@ #endif #ifdef CONFIG_M5282 - +#include <asm/m5282.h> +#include <asm/immap_5282.h> #endif #ifdef CONFIG_M5249 @@ -75,7 +80,6 @@ int checkcpu(void) { return 0; }; - #if defined(CONFIG_WATCHDOG) /* Called by macro WATCHDOG_RESET */ void watchdog_reset (void) @@ -117,11 +121,26 @@ int watchdog_init (void) #ifdef CONFIG_M5282 int checkcpu (void) { - puts ("CPU: MOTOROLA Coldfire MCF5282\n"); + unsigned char resetsource; + + printf ("CPU: MOTOROLA Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n", + MCFCCM_CIR>>8,MCFCCM_CIR & MCFCCM_CIR_PRN_MASK); + puts ("Reset: "); + resetsource = MCFRESET_RSR; + if (resetsource & MCFRESET_RSR_LOL) puts("Lose-of-lock "); + if (resetsource & MCFRESET_RSR_LOC) puts("Lose-of-clock "); + if (resetsource & MCFRESET_RSR_EXT) puts("external "); + if (resetsource & MCFRESET_RSR_POR) puts("Power-on "); + if (resetsource & MCFRESET_RSR_WDR) puts("Watchdog "); + if (resetsource & MCFRESET_RSR_SOFT) puts("Software "); + if (resetsource & MCFRESET_RSR_LVD) puts("Low-voltage "); + puts("\n"); return 0; } -int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) { +int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +{ + MCFRESET_RCR = MCFRESET_RCR_SOFTRST; return 0; }; #endif diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 350c431dba..0fa2ce2e14 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -2,6 +2,10 @@ * (C) Copyright 2003 * Josef Baumgartner <josef.baumgartner@telex.de> * + * MCF5282 additionals + * (C) Copyright 2005 + * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de> + * * See file CREDITS for list of people who contributed to this * project. * @@ -135,7 +139,180 @@ int cpu_init_r (void) */ void cpu_init_f (void) { +#ifndef CONFIG_WATCHDOG + /* disable watchdog if we aren't using it */ + MCFWTM_WCR = 0; +#endif + +#ifndef CONFIG_MONITOR_IS_IN_RAM + /* Set speed /PLL */ + MCFCLOCK_SYNCR = MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + + /* Set up the GPIO ports */ +#ifdef CFG_PEPAR + MCFGPIO_PEPAR = CFG_PEPAR; +#endif +#ifdef CFG_PFPAR + MCFGPIO_PFPAR = CFG_PFPAR; +#endif +#ifdef CFG_PJPAR + MCFGPIO_PJPAR = CFG_PJPAR; +#endif +#ifdef CFG_PSDPAR + MCFGPIO_PSDPAR = CFG_PSDPAR; +#endif +#ifdef CFG_PASPAR + MCFGPIO_PASPAR = CFG_PASPAR; +#endif +#ifdef CFG_PEHLPAR + MCFGPIO_PEHLPAR = CFG_PEHLPAR; +#endif +#ifdef CFG_PQSPAR + MCFGPIO_PQSPAR = CFG_PQSPAR; +#endif +#ifdef CFG_PTCPAR + MCFGPIO_PTCPAR = CFG_PTCPAR; +#endif +#ifdef CFG_PTDPAR + MCFGPIO_PTDPAR = CFG_PTDPAR; +#endif +#ifdef CFG_PUAPAR + MCFGPIO_PUAPAR = CFG_PUAPAR; +#endif + +#ifdef CFG_DDRUA + MCFGPIO_DDRUA = CFG_DDRUA; +#endif + + /* This is probably a bad place to setup chip selects, but everyone + else is doing it! */ + +#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \ + defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \ + defined(CFG_CS0_WS) + + MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; + + #if (CFG_CS0_WIDTH == 8) + #define CFG_CS0_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS0_WIDTH == 16) + #define CFG_CS0_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS0_WIDTH == 32) + #define CFG_CS0_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" + #endif + MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) + |CFG_CS0_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS0_RO != 0) + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1) + |MCFCSM_CSMR_WP|MCFCSM_CSMR_V; + #else + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)|MCFCSM_CSMR_V; + #endif +#else + #waring "Chip Select 0 are not initialized/used" +#endif + +#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \ + defined(CFG_CS1_WIDTH) & defined(CFG_CS1_RO) & \ + defined(CFG_CS1_WS) + + MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF; + + #if (CFG_CS1_WIDTH == 8) + #define CFG_CS1_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS1_WIDTH == 16) + #define CFG_CS1_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS1_WIDTH == 32) + #define CFG_CS1_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" + #endif + MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) + |CFG_CS1_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS1_RO != 0) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) + |MCFCSM_CSMR_WP + |MCFCSM_CSMR_V; + #else + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1) + |MCFCSM_CSMR_V; + #endif +#else + #warning "Chip Select 1 are not initialized/used" +#endif + +#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \ + defined(CFG_CS2_WIDTH) & defined(CFG_CS2_RO) & \ + defined(CFG_CS2_WS) + + MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF; + + #if (CFG_CS2_WIDTH == 8) + #define CFG_CS2_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS2_WIDTH == 16) + #define CFG_CS2_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS2_WIDTH == 32) + #define CFG_CS2_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" + #endif + MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) + |CFG_CS2_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS2_RO != 0) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) + |MCFCSM_CSMR_WP + |MCFCSM_CSMR_V; + #else + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1) + |MCFCSM_CSMR_V; + #endif +#else + #warning "Chip Select 2 are not initialized/used" +#endif + +#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \ + defined(CFG_CS3_WIDTH) & defined(CFG_CS3_RO) & \ + defined(CFG_CS3_WS) + + MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF; + + #if (CFG_CS3_WIDTH == 8) + #define CFG_CS3_PS MCFCSM_CSCR_PS_8 + #elif (CFG_CS3_WIDTH == 16) + #define CFG_CS3_PS MCFCSM_CSCR_PS_16 + #elif (CFG_CS3_WIDTH == 32) + #define CFG_CS3_PS MCFCSM_CSCR_PS_32 + #else + #error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" + #endif + MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) + |CFG_CS3_PS + |MCFCSM_CSCR_AA; + + #if (CFG_CS3_RO != 0) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) + |MCFCSM_CSMR_WP + |MCFCSM_CSMR_V; + #else + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1) + |MCFCSM_CSMR_V; + #endif +#else + #warning "Chip Select 3 are not initialized/used" +#endif + +#endif /* CONFIG_MONITOR_IS_IN_RAM */ + /* defer enabling cache until boot (see do_go) */ + /* icache_enable(); */ } /* diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c index a5c50af63c..b8b82d07dc 100644 --- a/cpu/mcf52x2/fec.c +++ b/cpu/mcf52x2/fec.c @@ -200,7 +200,9 @@ int eth_rx (void) int eth_init (bd_t * bd) { - +#ifndef CFG_ENET_BD_BASE + DECLARE_GLOBAL_DATA_PTR; +#endif int i; volatile fec_t *fecp = (fec_t *) (FEC_ADDR); @@ -242,9 +244,13 @@ int eth_init (bd_t * bd) /* Clear multicast address hash table */ +#ifdef CONFIG_M5282 + fecp->fec_ihash_table_high = 0; + fecp->fec_ihash_table_low = 0; +#else fecp->fec_hash_table_high = 0; fecp->fec_hash_table_low = 0; - +#endif /* Set maximum receive buffer size. */ fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; @@ -256,7 +262,16 @@ int eth_init (bd_t * bd) txIdx = 0; if (!rtx) { +#ifdef CFG_ENET_BD_BASE rtx = (RTXBD *) CFG_ENET_BD_BASE; +#else + rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off - + (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t) + +0xFF) + & ~0xFF) + ); + debug("set ENET_DB_BASE to %lX\n",(long) rtx); +#endif } /* @@ -294,11 +309,13 @@ int eth_init (bd_t * bd) fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; #else /* Half duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; + fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */ + fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; fecp->fec_x_cntrl = 0; #endif /* Set MII speed */ - fecp->fec_mii_speed = 0x0e; + fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10; + fecp->fec_mii_speed *= 2; /* Configure port B for MII. */ @@ -402,7 +419,7 @@ static void mii_discover_phy (void) */ udelay (10000); /* wait 10ms */ } - for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) { + for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) { phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1)); #ifdef ET_DEBUG printf ("PHY type 0x%x pass %d type ", phytype, pass); diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c index 79628d03e6..fe412a0a3a 100644 --- a/cpu/mcf52x2/serial.c +++ b/cpu/mcf52x2/serial.c @@ -65,6 +65,28 @@ void rs_serial_setbaudrate(int port,int baudrate) uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */ uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */ #endif +#if defined(CONFIG_M5282) + volatile unsigned char *uartp; + long clock; + + switch (port) + { + case 1: + uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); + break; + case 2: + uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3); + break; + default: + uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); + } + + clock = (long) CFG_CLK / ((long) 32 * baudrate); /* Set baud above */ + + uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */ + uartp[MCFUART_UBG2] = ((int) clock & 0xff); /* set lsb baud */ + +#endif }; void rs_serial_init(int port,int baudrate) @@ -74,10 +96,19 @@ void rs_serial_init(int port,int baudrate) /* * Reset UART, get it into known state... */ - if (port == 0) - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); - else - uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); + switch (port) + { + case 1: + uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2); + break; + #if defined(CONFIG_M5282) + case 2: + uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3); + break; + #endif + default: + uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1); + } uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index b4926e2376..9a13491fbd 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -54,8 +54,12 @@ * These vectors are to catch any un-intended traps. */ _vectors: - -.long 0x00000000, _START + .long 0x00000000 +#ifndef CONFIG_M5282 +.long _START +#else +.long _start - TEXT_BASE +#endif .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT @@ -96,20 +100,23 @@ _vectors: .text + +#if defined(CFG_INT_FLASH_BASE) && \ + (defined(CONFIG_M5282) || defined(CONFIG_M5281)) + #if (TEXT_BASE == CFG_INT_FLASH_BASE) + .long 0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */ + .long 0xFFFFFFFF /* all sectors protected */ + .long 0x00000000 /* supervisor/User restriction */ + .long 0x00000000 /* programm/data space restriction */ + .long 0x00000000 /* Flash security */ + #endif +#endif .globl _start _start: nop nop move.w #0x2700,%sr - /* if we come from a pre-loader we have no exception table and - * therefore no VBR to set - */ -#if !defined(CONFIG_MONITOR_IS_IN_RAM) - move.l #CFG_FLASH_BASE, %d0 - movec %d0, %VBR -#endif - #if defined(CONFIG_M5272) || defined(CONFIG_M5249) move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */ move.c %d0, %MBAR @@ -129,13 +136,43 @@ _start: move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ move.l %d0, 0x40000000 + /* Initialize RAMBAR1: locate SRAM and validate it */ + move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 + movec %d0, %RAMBAR1 + +#if (TEXT_BASE == CFG_INT_FLASH_BASE) + /* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */ + + move.l #(_flashbar_setup-CFG_INT_FLASH_BASE), %a0 + move.l #(_flashbar_setup_end-CFG_INT_FLASH_BASE), %a1 + move.l #(CFG_INIT_RAM_ADDR), %a2 +_copy_flash: + move.l (%a0)+, (%a2)+ + cmp.l %a0, %a1 + bgt.s _copy_flash + jmp CFG_INIT_RAM_ADDR + +_flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 movec %d0, %RAMBAR0 + jmp _after_flashbar_copy.L /* Force jump to absolute address */ +_flashbar_setup_end: + nop +_after_flashbar_copy: +#else + /* Setup code to initialize FLASHBAR, if start from external Memory */ + move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 + movec %d0, %RAMBAR0 +#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */ - /* Initialize RAMBAR1: locate SRAM and validate it */ - move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 - movec %d0, %RAMBAR1 +#endif + /* if we come from a pre-loader we have no exception table and + * therefore no VBR to set + */ +#if !defined(CONFIG_MONITOR_IS_IN_RAM) + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR #endif /* invalidate and disable cache */ @@ -157,7 +194,6 @@ _start: /* board_init_f() does not return /*------------------------------------------------------------------------------*/ - /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -180,7 +216,6 @@ relocate_code: move.l #CFG_MONITOR_BASE, %a1 move.l #__init_end, %a2 move.l %a0, %a3 - /* copy the code to RAM */ 1: move.l (%a1)+, (%a3)+ @@ -191,14 +226,14 @@ relocate_code: * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ - move.l %a0, %a1 + move.l %a0, %a1 add.l #(in_ram - CFG_MONITOR_BASE), %a1 jmp (%a1) in_ram: clear_bss: - /* + /* * Now clear BSS segment */ move.l %a0, %a1 @@ -228,6 +263,23 @@ clear_bss: cmp.l %a2, %a1 bne 7b +#if defined(CONFIG_M5281) || defined(CONFIG_M5282) + /* patch the 3 accesspoints to 3 ichache_state */ + /* quick and dirty */ + + move.l %a0,%d1 + add.l #(icache_state - CFG_MONITOR_BASE),%d1 + move.l %a0,%a1 + add.l #(icache_state_access_1+2 - CFG_MONITOR_BASE),%a1 + move.l %d1,(%a1) + move.l %a0,%a1 + add.l #(icache_state_access_2+2 - CFG_MONITOR_BASE),%a1 + move.l %d1,(%a1) + move.l %a0,%a1 + add.l #(icache_state_access_3+2 - CFG_MONITOR_BASE),%a1 + move.l %d1,(%a1) +#endif + /* calculate relative jump to board_init_r in ram */ move.l %a0, %a1 add.l #(board_init_r - CFG_MONITOR_BASE), %a1 @@ -235,6 +287,10 @@ clear_bss: /* set parameters for board_init_r */ move.l %a0,-(%sp) /* dest_addr */ move.l %d0,-(%sp) /* gd */ + #if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \ + defined(CFG_HALT_BEFOR_RAM_JUMP) + halt + #endif jsr (%a1) /*------------------------------------------------------------------------------*/ @@ -289,6 +345,7 @@ icache_enable: move.l #0x80400100, %d0 /* Setup cache mask, data cache disabel*/ movec %d0, %CACR /* Enable cache */ moveq #1, %d0 +icache_state_access_1: move.l %d0, icache_state rts #endif @@ -323,18 +380,19 @@ icache_disable: movec %d0, %ACR0 /* Enable cache */ movec %d0, %ACR1 /* Enable cache */ moveq #0, %d0 +icache_state_access_2: move.l %d0, icache_state rts .globl icache_status icache_status: +icache_state_access_3: move.l icache_state, %d0 rts .data icache_state: - .long 1 - + .long 0 /* cache is diabled on inirialization */ /*------------------------------------------------------------------------------*/ |