Patch by TsiChung Liew, 23 Sep 2004:

- add support for MPC8220 CPU
- Add support for Alaska and Yukon boards

1 files changed, 108 insertions, 0 deletions

diff --git a/cpu/mpc8220/dramSetup.h b/cpu/mpc8220/dramSetup.h
new file mode 100644
index 0000000000..3b64e088cd
--- /dev/null
+++ b/cpu/mpc8220/dramSetup.h
@@ -0,0 +1,108 @@
+/*
+ * dramSetup.h
+ *
+ * Prototypes, etc. for the Motorola MPC8220
+ * embedded cpu chips
+ *
+ * 2004 (c) Freescale, Inc.
+ * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __INCdramsetuph
+#define __INCdramsetuph
+#ifndef __ASSEMBLY__
+/* Where various things are in the SPD */
+#define LOC_TYPE                    2
+#define LOC_CHECKSUM                63
+#define LOC_PHYS_BANKS              5
+#define LOC_LOGICAL_BANKS           17
+#define LOC_ROWS                    3
+#define LOC_COLS                    4
+#define LOC_WIDTH_HIGH              7
+#define LOC_WIDTH_LOW               6
+#define LOC_REFRESH                 12
+#define LOC_BURSTS                  16
+#define LOC_CAS                     18
+#define LOC_CS                      19
+#define LOC_WE                      20
+#define LOC_Tcyc                    9
+#define LOC_Tac                     10
+#define LOC_Trp                     27
+#define LOC_Trrd                    28
+#define LOC_Trcd                    29
+#define LOC_Tras                    30
+#define LOC_Buffered                21
+/* Types of memory the SPD can tell us about.
+ * We can actually only use SDRAM and DDR.
+ */
+#define TYPE_DRAM                   1	/* plain old dram */
+#define TYPE_EDO                    2	/* EDO dram */
+#define TYPE_Nibble                 3	/* serial nibble memory */
+#define TYPE_SDR                    4	/* SDRAM */
+#define TYPE_ROM                    5	/*  */
+#define TYPE_SGRRAM                 6	/* graphics memory */
+#define TYPE_DDR                    7	/* DDR sdram */
+#define SDRAMDS_MASK        0x3	/* each field is 2 bits wide */
+#define SDRAMDS_SBE_SHIFT     8	/* Clock enable drive strength */
+#define SDRAMDS_SBC_SHIFT     6	/* Clocks drive strength */
+#define SDRAMDS_SBA_SHIFT     4	/* Address drive strength */
+#define SDRAMDS_SBS_SHIFT     2	/* SDR DQS drive strength */
+#define SDRAMDS_SBD_SHIFT     0	/* Data and DQS drive strength */
+#define  DRIVE_STRENGTH_HIGH 0
+#define  DRIVE_STRENGTH_MED  1
+#define  DRIVE_STRENGTH_LOW  2
+#define  DRIVE_STRENGTH_OFF  3
+
+#define OK      0
+#define ERROR   -1
+/* Structure to hold information about address muxing. */
+	typedef struct tagMuxDescriptor {
+	u8 MuxValue;
+	u8 Columns;
+	u8 Rows;
+	u8 MoreColumns;
+} muxdesc_t;
+
+/* Structure to define one physical bank of
+ * memory.  Note that dram size in bytes is
+ * (2^^(rows+columns)) * width * banks / 8
+*/
+typedef struct tagDramInfo {
+	u32 size;		/* size in bytes */
+	u32 base;		/* base address */
+	u8 ordinal;		/* where in the memory map will we put this */
+	u8 type;
+	u8 rows;
+	u8 cols;
+	u16 width;		/* width of each chip in bits */
+	u8 banks;		/* number of chips, aka logical banks */
+	u8 bursts;		/* bit-encoded allowable burst length */
+	u8 CAS;			/* bit-encoded CAS latency values */
+	u8 CS;			/* bit-encoded CS latency values */
+	u8 WE;			/* bit-encoded WE latency values */
+	u8 Trp;			/* bit-encoded row precharge time */
+	u8 Trcd;		/* bit-encoded RAS to CAS delay */
+	u8 buffered;		/* buffered or not */
+	u8 refresh;		/* encoded refresh rate */
+} draminfo_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __INCdramsetuph */