Initial revision

1 files changed, 498 insertions, 0 deletions

diff --git a/cpu/mpc8260/serial_scc.c b/cpu/mpc8260/serial_scc.c
new file mode 100644
index 0000000000..ca763024fc
--- /dev/null
+++ b/cpu/mpc8260/serial_scc.c
@@ -0,0 +1,498 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
+ */
+
+/*
+ * Minimal serial functions needed to use one of the SCC ports
+ * as serial console interface.
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <asm/cpm_8260.h>
+
+#if defined(CONFIG_CONS_ON_SCC)
+
+#if CONFIG_CONS_INDEX == 1	/* Console on SCC1 */
+
+#define SCC_INDEX		0
+#define PROFF_SCC		PROFF_SCC1
+#define CMXSCR_MASK		(CMXSCR_GR1|CMXSCR_SC1|\
+					CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define CMXSCR_VALUE		(CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
+#define CPM_CR_SCC_PAGE		CPM_CR_SCC1_PAGE
+#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC1_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 2	/* Console on SCC2 */
+
+#define SCC_INDEX		1
+#define PROFF_SCC		PROFF_SCC2
+#define CMXSCR_MASK		(CMXSCR_GR2|CMXSCR_SC2|\
+					CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
+#define CMXSCR_VALUE		(CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
+#define CPM_CR_SCC_PAGE		CPM_CR_SCC2_PAGE
+#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC2_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 3	/* Console on SCC3 */
+
+#define SCC_INDEX		2
+#define PROFF_SCC		PROFF_SCC3
+#define CMXSCR_MASK		(CMXSCR_GR3|CMXSCR_SC3|\
+					CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
+#define CMXSCR_VALUE		(CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
+#define CPM_CR_SCC_PAGE		CPM_CR_SCC3_PAGE
+#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC3_SBLOCK
+
+#elif CONFIG_CONS_INDEX == 4	/* Console on SCC4 */
+
+#define SCC_INDEX		3
+#define PROFF_SCC		PROFF_SCC4
+#define CMXSCR_MASK		(CMXSCR_GR4|CMXSCR_SC4|\
+					CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
+#define CMXSCR_VALUE		(CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
+#define CPM_CR_SCC_PAGE		CPM_CR_SCC4_PAGE
+#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC4_SBLOCK
+
+#else
+
+#error "console not correctly defined"
+
+#endif
+
+int serial_init (void)
+{
+        volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile scc_t *sp;
+	volatile scc_uart_t *up;
+	volatile cbd_t *tbdf, *rbdf;
+	volatile cpm8260_t *cp = &(im->im_cpm);
+	uint	dpaddr;
+
+	/* initialize pointers to SCC */
+
+	sp = (scc_t *) &(im->im_scc[SCC_INDEX]);
+	up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+
+	/* Disable transmitter/receiver.
+	*/
+	sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	/* put the SCC channel into NMSI (non multiplexd serial interface)
+	 * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
+	 */
+	im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr&~CMXSCR_MASK)|CMXSCR_VALUE;
+
+	/* Set up the baud rate generator.
+	*/
+	serial_setbrg ();
+
+	/* Allocate space for two buffer descriptors in the DP ram.
+	 * damm: allocating space after the two buffers for rx/tx data
+	 */
+
+	dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
+
+	/* Set the physical address of the host memory buffers in
+	 * the buffer descriptors.
+	 */
+	rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
+	rbdf->cbd_bufaddr = (uint) (rbdf+2);
+	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+	tbdf = rbdf + 1;
+	tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+	tbdf->cbd_sc = BD_SC_WRAP;
+
+	/* Set up the uart parameters in the parameter ram.
+	*/
+	up->scc_genscc.scc_rbase = dpaddr;
+	up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
+	up->scc_genscc.scc_rfcr = CPMFCR_EB;
+	up->scc_genscc.scc_tfcr = CPMFCR_EB;
+	up->scc_genscc.scc_mrblr = 1;
+	up->scc_maxidl = 0;
+	up->scc_brkcr = 1;
+	up->scc_parec = 0;
+	up->scc_frmec = 0;
+	up->scc_nosec = 0;
+	up->scc_brkec = 0;
+	up->scc_uaddr1 = 0;
+	up->scc_uaddr2 = 0;
+	up->scc_toseq = 0;
+	up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
+	up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
+	up->scc_rccm = 0xc0ff;
+
+	/* Mask all interrupts and remove anything pending.
+	*/
+	sp->scc_sccm = 0;
+	sp->scc_scce = 0xffff;
+
+	/* Set 8 bit FIFO, 16 bit oversampling and UART mode.
+	*/
+	sp->scc_gsmrh = SCC_GSMRH_RFW;	/* 8 bit FIFO */
+	sp->scc_gsmrl = \
+		SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
+
+	/* Set CTS flow control, 1 stop bit, 8 bit character length,
+	 * normal async UART mode, no parity
+	 */
+	sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
+
+	/* execute the "Init Rx and Tx params" CP command.
+	*/
+
+	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
+	  ;
+
+	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
+					0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
+	  ;
+
+	/* Enable transmitter/receiver.
+	*/
+	sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
+
+	return (0);
+}
+
+void
+serial_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CONS_USE_EXTC)
+	m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate,
+		CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
+#else
+	m8260_cpm_setbrg(SCC_INDEX, gd->baudrate);
+#endif
+}
+
+void
+serial_putc(const char c)
+{
+	volatile scc_uart_t	*up;
+	volatile cbd_t		*tbdf;
+        volatile immap_t	*im;
+
+	if (c == '\n')
+		serial_putc ('\r');
+
+        im = (immap_t *)CFG_IMMR;
+	up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+	tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
+
+	/* Wait for last character to go.
+	 */
+	while (tbdf->cbd_sc & BD_SC_READY)
+		;
+
+	/* Load the character into the transmit buffer.
+	 */
+	*(volatile char *)tbdf->cbd_bufaddr = c;
+	tbdf->cbd_datlen = 1;
+	tbdf->cbd_sc |= BD_SC_READY;
+}
+
+void
+serial_puts (const char *s)
+{
+	while (*s) {
+		serial_putc (*s++);
+	}
+}
+
+int
+serial_getc(void)
+{
+	volatile cbd_t		*rbdf;
+	volatile scc_uart_t	*up;
+        volatile immap_t	*im;
+	unsigned char		c;
+
+        im = (immap_t *)CFG_IMMR;
+	up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+	rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
+
+	/* Wait for character to show up.
+	 */
+	while (rbdf->cbd_sc & BD_SC_EMPTY)
+		;
+
+	/* Grab the char and clear the buffer again.
+	 */
+	c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
+	rbdf->cbd_sc |= BD_SC_EMPTY;
+
+	return (c);
+}
+
+int
+serial_tstc()
+{
+	volatile cbd_t		*rbdf;
+	volatile scc_uart_t	*up;
+        volatile immap_t	*im;
+
+        im = (immap_t *)CFG_IMMR;
+	up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
+	rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
+
+	return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
+}
+
+#endif	/* CONFIG_CONS_ON_SCC */
+
+#if defined(CONFIG_KGDB_ON_SCC)
+
+#if defined(CONFIG_CONS_ON_SCC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
+#error Whoops! serial console and kgdb are on the same scc serial port
+#endif
+
+#if CONFIG_KGDB_INDEX == 1	/* KGDB Port on SCC1 */
+
+#define KGDB_SCC_INDEX		0
+#define KGDB_PROFF_SCC		PROFF_SCC1
+#define KGDB_CMXSCR_MASK	(CMXSCR_GR1|CMXSCR_SC1|\
+					CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
+#define KGDB_CMXSCR_VALUE	(CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
+#define KGDB_CPM_CR_SCC_PAGE	CPM_CR_SCC1_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK	CPM_CR_SCC1_SBLOCK
+
+#elif CONFIG_KGDB_INDEX == 2	/* KGDB Port on SCC2 */
+
+#define KGDB_SCC_INDEX		1
+#define KGDB_PROFF_SCC		PROFF_SCC2
+#define KGDB_CMXSCR_MASK	(CMXSCR_GR2|CMXSCR_SC2|\
+					CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
+#define KGDB_CMXSCR_VALUE	(CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
+#define KGDB_CPM_CR_SCC_PAGE	CPM_CR_SCC2_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK	CPM_CR_SCC2_SBLOCK
+
+#elif CONFIG_KGDB_INDEX == 3	/* KGDB Port on SCC3 */
+
+#define KGDB_SCC_INDEX		2
+#define KGDB_PROFF_SCC		PROFF_SCC3
+#define KGDB_CMXSCR_MASK	(CMXSCR_GR3|CMXSCR_SC3|\
+					CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
+#define KGDB_CMXSCR_VALUE	(CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
+#define KGDB_CPM_CR_SCC_PAGE	CPM_CR_SCC3_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK	CPM_CR_SCC3_SBLOCK
+
+#elif CONFIG_KGDB_INDEX == 4	/* KGDB Port on SCC4 */
+
+#define KGDB_SCC_INDEX		3
+#define KGDB_PROFF_SCC		PROFF_SCC4
+#define KGDB_CMXSCR_MASK	(CMXSCR_GR4|CMXSCR_SC4|\
+					CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
+#define KGDB_CMXSCR_VALUE	(CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
+#define KGDB_CPM_CR_SCC_PAGE	CPM_CR_SCC4_PAGE
+#define KGDB_CPM_CR_SCC_SBLOCK	CPM_CR_SCC4_SBLOCK
+
+#else
+
+#error "kgdb serial port not correctly defined"
+
+#endif
+
+void
+kgdb_serial_init (void)
+{
+        volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile scc_t *sp;
+	volatile scc_uart_t *up;
+	volatile cbd_t *tbdf, *rbdf;
+	volatile cpm8260_t *cp = &(im->im_cpm);
+	uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
+	char *s, *e;
+
+	if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
+		ulong rate = simple_strtoul(s, &e, 10);
+		if (e > s && *e == '\0')
+			speed = rate;
+	}
+
+	/* initialize pointers to SCC */
+
+	sp = (scc_t *) &(im->im_scc[KGDB_SCC_INDEX]);
+	up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
+
+	/* Disable transmitter/receiver.
+	*/
+	sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	/* put the SCC channel into NMSI (non multiplexd serial interface)
+	 * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
+	 */
+	im->im_cpmux.cmx_scr = \
+		(im->im_cpmux.cmx_scr & ~KGDB_CMXSCR_MASK) | KGDB_CMXSCR_VALUE;
+
+	/* Set up the baud rate generator.
+	*/
+#if defined(CONFIG_KGDB_USE_EXTC)
+	m8260_cpm_extcbrg(KGDB_SCC_INDEX, speed,
+		CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
+#else
+	m8260_cpm_setbrg(KGDB_SCC_INDEX, speed);
+#endif
+
+	/* Allocate space for two buffer descriptors in the DP ram.
+	 * damm: allocating space after the two buffers for rx/tx data
+	 */
+
+	dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
+
+	/* Set the physical address of the host memory buffers in
+	 * the buffer descriptors.
+	 */
+	rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
+	rbdf->cbd_bufaddr = (uint) (rbdf+2);
+	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
+	tbdf = rbdf + 1;
+	tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+	tbdf->cbd_sc = BD_SC_WRAP;
+
+	/* Set up the uart parameters in the parameter ram.
+	*/
+	up->scc_genscc.scc_rbase = dpaddr;
+	up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
+	up->scc_genscc.scc_rfcr = CPMFCR_EB;
+	up->scc_genscc.scc_tfcr = CPMFCR_EB;
+	up->scc_genscc.scc_mrblr = 1;
+	up->scc_maxidl = 0;
+	up->scc_brkcr = 1;
+	up->scc_parec = 0;
+	up->scc_frmec = 0;
+	up->scc_nosec = 0;
+	up->scc_brkec = 0;
+	up->scc_uaddr1 = 0;
+	up->scc_uaddr2 = 0;
+	up->scc_toseq = 0;
+	up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
+	up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
+	up->scc_rccm = 0xc0ff;
+
+	/* Mask all interrupts and remove anything pending.
+	*/
+	sp->scc_sccm = 0;
+	sp->scc_scce = 0xffff;
+
+	/* Set 8 bit FIFO, 16 bit oversampling and UART mode.
+	*/
+	sp->scc_gsmrh = SCC_GSMRH_RFW;	/* 8 bit FIFO */
+	sp->scc_gsmrl = \
+		SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
+
+	/* Set CTS flow control, 1 stop bit, 8 bit character length,
+	 * normal async UART mode, no parity
+	 */
+	sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
+
+	/* execute the "Init Rx and Tx params" CP command.
+	*/
+
+	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
+	  ;
+
+	cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SCC_PAGE, KGDB_CPM_CR_SCC_SBLOCK,
+					0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
+	  ;
+
+	/* Enable transmitter/receiver.
+	*/
+	sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
+
+	printf("SCC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
+}
+
+void
+putDebugChar(const char c)
+{
+	volatile scc_uart_t	*up;
+	volatile cbd_t		*tbdf;
+        volatile immap_t	*im;
+
+	if (c == '\n')
+		putDebugChar ('\r');
+
+        im = (immap_t *)CFG_IMMR;
+	up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
+	tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
+
+	/* Wait for last character to go.
+	 */
+	while (tbdf->cbd_sc & BD_SC_READY)
+		;
+
+	/* Load the character into the transmit buffer.
+	 */
+	*(volatile char *)tbdf->cbd_bufaddr = c;
+	tbdf->cbd_datlen = 1;
+	tbdf->cbd_sc |= BD_SC_READY;
+}
+
+void
+putDebugStr (const char *s)
+{
+	while (*s) {
+		putDebugChar (*s++);
+	}
+}
+
+int
+getDebugChar(void)
+{
+	volatile cbd_t		*rbdf;
+	volatile scc_uart_t	*up;
+        volatile immap_t	*im;
+	unsigned char		c;
+
+        im = (immap_t *)CFG_IMMR;
+	up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
+	rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
+
+	/* Wait for character to show up.
+	 */
+	while (rbdf->cbd_sc & BD_SC_EMPTY)
+		;
+
+	/* Grab the char and clear the buffer again.
+	 */
+	c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
+	rbdf->cbd_sc |= BD_SC_EMPTY;
+
+	return (c);
+}
+
+void
+kgdb_interruptible(int yes)
+{
+	return;
+}
+
+#endif	/* CONFIG_KGDB_ON_SCC */