diff options
| author | Wolfgang Denk <wd@pollux.denx.de> | 2006-11-27 23:11:18 +0100 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2006-11-27 23:11:18 +0100 |
| commit | d2c83f549378fb3fc34cb3c2e62fd772fbf8b68b (patch) | |
| tree | f00383ed01ca18fa0beee4930ebb7f3dc4153e5e /cpu/ppc4xx/4xx_enet.c | |
| parent | 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa (diff) | |
| parent | 1729b92cde575476684bffe819d0b7791b57bff2 (diff) | |
Merge with /home/sr/git/u-boot/denx-alpr-merge-test
Diffstat (limited to 'cpu/ppc4xx/4xx_enet.c')
| -rw-r--r-- | cpu/ppc4xx/4xx_enet.c | 22 |
1 files changed, 3 insertions, 19 deletions
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index aefe126fd2..427ea94626 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -470,8 +470,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #else if ((devnum == 0) || (devnum == 1)) { out32 (ZMII_FER, (ZMII_FER_SMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); - } - else { /* ((devnum == 2) || (devnum == 3)) */ + } else { /* ((devnum == 2) || (devnum == 3)) */ out32 (ZMII_FER, ZMII_FER_MDI << ZMII_FER_V (devnum)); out32 (RGMII_FER, ((RGMII_FER_RGMII << RGMII_FER_V (2)) | (RGMII_FER_RGMII << RGMII_FER_V (3)))); @@ -561,22 +560,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) * otherwise, just check the speeds & feeds */ if (hw_p->first_init == 0) { -#if defined(CONFIG_88E1111_CLK_DELAY) - /* - * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs - * the "RGMII transmit timing control" and "RGMII receive - * timing control" bits set, so that Gbit communication works - * without problems. - * Also set the "Transmitter disable" to 1 to enable the - * transmitter. - * After setting these bits a soft-reset must occur for this - * change to become active. - */ - miiphy_read (dev->name, reg, 0x14, ®_short); - reg_short |= (1 << 7) | (1 << 1) | (1 << 0); - miiphy_write (dev->name, reg, 0x14, reg_short); -#endif -#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */ +#if defined(CONFIG_M88E1111_PHY) miiphy_write (dev->name, reg, 0x14, 0x0ce3); miiphy_write (dev->name, reg, 0x18, 0x4101); miiphy_write (dev->name, reg, 0x09, 0x0e00); @@ -808,7 +792,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) hw_p->rx[i].ctrl |= MAL_RX_CTRL_EMPTY | MAL_RX_CTRL_INTR; hw_p->rx_ready[i] = -1; #if 0 - printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) rx[i].data_ptr); + printf ("RX_BUFF %d @ 0x%08lx\n", i, (ulong) hw_p->rx[i].data_ptr); #endif } |