ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 1298 deletions

diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
deleted file mode 100644
index 10b58b7118..0000000000
--- a/cpu/ppc4xx/4xx_pcie.c
+++ /dev/null
@@ -1,1298 +0,0 @@
-/*
- * (C) Copyright 2006 - 2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <pci.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-
-#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) ||	\
-    defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
-    defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE)
-
-#include <asm/4xx_pcie.h>
-
-enum {
-	PTYPE_ENDPOINT		= 0x0,
-	PTYPE_LEGACY_ENDPOINT	= 0x1,
-	PTYPE_ROOT_PORT		= 0x4,
-
-	LNKW_X1			= 0x1,
-	LNKW_X4			= 0x4,
-	LNKW_X8			= 0x8
-};
-
-static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
-
-/*
- * Per default, all cards are present, so we need to check if the
- * link comes up.
- */
-int __board_pcie_card_present(int port)
-{
-	return 1;
-}
-int board_pcie_card_present(int port)
-	__attribute__((weak, alias("__board_pcie_card_present")));
-
-/*
- * Some boards have runtime detection of the first and last PCIe
- * slot used, so let's provide weak default functions for the
- * common version.
- */
-int __board_pcie_first(void)
-{
-	return 0;
-}
-int board_pcie_first(void)
-	__attribute__((weak, alias("__board_pcie_first")));
-
-int __board_pcie_last(void)
-{
-	return CONFIG_SYS_PCIE_NR_PORTS - 1;
-}
-int board_pcie_last(void)
-	__attribute__((weak, alias("__board_pcie_last")));
-
-void __board_pcie_setup_port(int port, int rootpoint)
-{
-	/* noting in this weak default implementation */
-}
-void board_pcie_setup_port(int port, int rootpoint)
-	__attribute__((weak, alias("__board_pcie_setup_port")));
-
-void pcie_setup_hoses(int busno)
-{
-	struct pci_controller *hose;
-	int i, bus;
-	int ret = 0;
-	char *env;
-	unsigned int delay;
-	int first = board_pcie_first();
-	int last = board_pcie_last();
-
-	/*
-	 * Assume we're called after the PCI(X) hose(s) are initialized,
-	 * which takes bus ID 0... and therefore start numbering PCIe's
-	 * from the next number.
-	 */
-	bus = busno;
-
-	for (i = first; i <= last; i++) {
-		/*
-		 * Some boards (e.g. Katmai) can detects via hardware
-		 * if a PCIe card is plugged, so let's check this.
-		 */
-		if (!board_pcie_card_present(i))
-			continue;
-
-		if (is_end_point(i)) {
-			board_pcie_setup_port(i, 0);
-			ret = ppc4xx_init_pcie_endport(i);
-		} else {
-			board_pcie_setup_port(i, 1);
-			ret = ppc4xx_init_pcie_rootport(i);
-		}
-		if (ret == -ENODEV)
-			continue;
-		if (ret) {
-			printf("PCIE%d: initialization as %s failed\n", i,
-			       is_end_point(i) ? "endpoint" : "root-complex");
-			continue;
-		}
-
-		hose = &pcie_hose[i];
-		hose->first_busno = bus;
-		hose->last_busno = bus;
-		hose->current_busno = bus;
-
-		/* setup mem resource */
-		pci_set_region(hose->regions + 0,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMSIZE,
-			       PCI_REGION_MEM);
-		hose->region_count = 1;
-		pci_register_hose(hose);
-
-		if (is_end_point(i)) {
-			ppc4xx_setup_pcie_endpoint(hose, i);
-			/*
-			 * Reson for no scanning is endpoint can not generate
-			 * upstream configuration accesses.
-			 */
-		} else {
-			ppc4xx_setup_pcie_rootpoint(hose, i);
-			env = getenv ("pciscandelay");
-			if (env != NULL) {
-				delay = simple_strtoul(env, NULL, 10);
-				if (delay > 5)
-					printf("Warning, expect noticable delay before "
-					       "PCIe scan due to 'pciscandelay' value!\n");
-				mdelay(delay * 1000);
-			}
-
-			/*
-			 * Config access can only go down stream
-			 */
-			hose->last_busno = pci_hose_scan(hose);
-			bus = hose->last_busno + 1;
-		}
-	}
-}
-
-static int validate_endpoint(struct pci_controller *hose)
-{
-	if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
-		return (is_end_point(0));
-	else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
-		return (is_end_point(1));
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-	else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
-		return (is_end_point(2));
-#endif
-
-	return 0;
-}
-
-static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
-{
-	u8 *base = (u8*)hose->cfg_data;
-
-	/* use local configuration space for the first bus */
-	if (PCI_BUS(devfn) == 0) {
-		if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
-			base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
-		if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
-			base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-		if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
-			base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
-#endif
-	}
-
-	return base;
-}
-
-static void pcie_dmer_disable(void)
-{
-	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
-		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
-	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
-		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-	mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
-		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
-#endif
-}
-
-static void pcie_dmer_enable(void)
-{
-	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
-		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
-	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
-		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-	mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
-		mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
-#endif
-}
-
-static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
-	int offset, int len, u32 *val) {
-
-	u8 *address;
-	*val = 0;
-
-	if (validate_endpoint(hose))
-		return 0;		/* No upstream config access */
-
-	/*
-	 * Bus numbers are relative to hose->first_busno
-	 */
-	devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
-	/*
-	 * NOTICE: configuration space ranges are currenlty mapped only for
-	 * the first 16 buses, so such limit must be imposed. In case more
-	 * buses are required the TLB settings in board/amcc/<board>/init.S
-	 * need to be altered accordingly (one bus takes 1 MB of memory space).
-	 */
-	if (PCI_BUS(devfn) >= 16)
-		return 0;
-
-	/*
-	 * Only single device/single function is supported for the primary and
-	 * secondary buses of the 440SPe host bridge.
-	 */
-	if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
-		((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
-		return 0;
-
-	address = pcie_get_base(hose, devfn);
-	offset += devfn << 4;
-
-	/*
-	 * Reading from configuration space of non-existing device can
-	 * generate transaction errors. For the read duration we suppress
-	 * assertion of machine check exceptions to avoid those.
-	 */
-	pcie_dmer_disable ();
-
-	debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
-	switch (len) {
-	case 1:
-		*val = in_8(hose->cfg_data + offset);
-		break;
-	case 2:
-		*val = in_le16((u16 *)(hose->cfg_data + offset));
-		break;
-	default:
-		*val = in_le32((u32*)(hose->cfg_data + offset));
-		break;
-	}
-
-	pcie_dmer_enable ();
-
-	return 0;
-}
-
-static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
-	int offset, int len, u32 val) {
-
-	u8 *address;
-
-	if (validate_endpoint(hose))
-		return 0;		/* No upstream config access */
-
-	/*
-	 * Bus numbers are relative to hose->first_busno
-	 */
-	devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
-	/*
-	 * Same constraints as in pcie_read_config().
-	 */
-	if (PCI_BUS(devfn) >= 16)
-		return 0;
-
-	if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
-		((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
-		return 0;
-
-	address = pcie_get_base(hose, devfn);
-	offset += devfn << 4;
-
-	/*
-	 * Suppress MCK exceptions, similar to pcie_read_config()
-	 */
-	pcie_dmer_disable ();
-
-	switch (len) {
-	case 1:
-		out_8(hose->cfg_data + offset, val);
-		break;
-	case 2:
-		out_le16((u16 *)(hose->cfg_data + offset), val);
-		break;
-	default:
-		out_le32((u32 *)(hose->cfg_data + offset), val);
-		break;
-	}
-
-	pcie_dmer_enable ();
-
-	return 0;
-}
-
-int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
-{
-	u32 v;
-	int rv;
-
-	rv = pcie_read_config(hose, dev, offset, 1, &v);
-	*val = (u8)v;
-	return rv;
-}
-
-int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
-{
-	u32 v;
-	int rv;
-
-	rv = pcie_read_config(hose, dev, offset, 2, &v);
-	*val = (u16)v;
-	return rv;
-}
-
-int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
-{
-	u32 v;
-	int rv;
-
-	rv = pcie_read_config(hose, dev, offset, 3, &v);
-	*val = (u32)v;
-	return rv;
-}
-
-int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
-{
-	return pcie_write_config(hose,(u32)dev,offset,1,val);
-}
-
-int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
-{
-	return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
-}
-
-int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
-{
-	return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
-}
-
-#if defined(CONFIG_440SPE)
-static void ppc4xx_setup_utl(u32 port) {
-
-	volatile void *utl_base = NULL;
-
-	/*
-	 * Map UTL registers
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
-		break;
-	}
-	utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
-	/*
-	 * Set buffer allocations and then assert VRB and TXE.
-	 */
-	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
-	out_be32(utl_base + PEUTL_INTR,    0x02000000);
-	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
-	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
-	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
-	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
-}
-
-static int check_error(void)
-{
-	u32 valPE0, valPE1, valPE2;
-	int err = 0;
-
-	/* SDR0_PEGPLLLCT1 reset */
-	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
-		printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
-
-	valPE0 = SDR_READ(PESDR0_RCSSET);
-	valPE1 = SDR_READ(PESDR1_RCSSET);
-	valPE2 = SDR_READ(PESDR2_RCSSET);
-
-	/* SDR0_PExRCSSET rstgu */
-	if (!(valPE0 & 0x01000000) ||
-	    !(valPE1 & 0x01000000) ||
-	    !(valPE2 & 0x01000000)) {
-		printf("PCIE:  SDR0_PExRCSSET rstgu error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET rstdl */
-	if (!(valPE0 & 0x00010000) ||
-	    !(valPE1 & 0x00010000) ||
-	    !(valPE2 & 0x00010000)) {
-		printf("PCIE:  SDR0_PExRCSSET rstdl error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET rstpyn */
-	if ((valPE0 & 0x00001000) ||
-	    (valPE1 & 0x00001000) ||
-	    (valPE2 & 0x00001000)) {
-		printf("PCIE:  SDR0_PExRCSSET rstpyn error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET hldplb */
-	if ((valPE0 & 0x10000000) ||
-	    (valPE1 & 0x10000000) ||
-	    (valPE2 & 0x10000000)) {
-		printf("PCIE:  SDR0_PExRCSSET hldplb error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET rdy */
-	if ((valPE0 & 0x00100000) ||
-	    (valPE1 & 0x00100000) ||
-	    (valPE2 & 0x00100000)) {
-		printf("PCIE:  SDR0_PExRCSSET rdy error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET shutdown */
-	if ((valPE0 & 0x00000100) ||
-	    (valPE1 & 0x00000100) ||
-	    (valPE2 & 0x00000100)) {
-		printf("PCIE:  SDR0_PExRCSSET shutdown error\n");
-		err = -1;
-	}
-	return err;
-}
-
-/*
- * Initialize PCI Express core
- */
-int ppc4xx_init_pcie(void)
-{
-	int time_out = 20;
-
-	/* Set PLL clock receiver to LVPECL */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
-	if (check_error()) {
-		printf("ERROR: failed to set PCIe reference clock receiver --"
-			"PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1));
-
-		return -1;
-	}
-
-	/* Did resistance calibration work? */
-	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) {
-		printf("ERROR: PCIe resistance calibration failed --"
-			"PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));
-
-		return -1;
-	}
-	/* De-assert reset of PCIe PLL, wait for lock */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
-	udelay(300);	/* 300 uS is maximum time lock should take */
-
-	while (time_out) {
-		if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
-			time_out--;
-			udelay(20);	/* Wait 20 uS more if needed */
-		} else
-			break;
-	}
-	if (!time_out) {
-		printf("ERROR: PCIe PLL VCO output not locked to ref clock --"
-			"PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3));
-
-		return -1;
-	}
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-static void ppc4xx_setup_utl(u32 port)
-{
-	volatile void *utl_base = NULL;
-
-	/*
-	 * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);	/* BAM 11100000=4KB */
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
-			+ 0x1000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);	/* BAM 11100000=4KB */
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
-		break;
-	}
-	utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
-	/*
-	 * Set buffer allocations and then assert VRB and TXE.
-	 */
-	out_be32(utl_base + PEUTL_PBCTL, 0x0800000c);	/* PLBME, CRRE */
-	out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
-	out_be32(utl_base + PEUTL_INTR, 0x02000000);
-	out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000);	/* OPD = 512 Bytes */
-	out_be32(utl_base + PEUTL_PBBSZ, 0x00000000);	/* Max 512 Bytes */
-	out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
-	out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000);	/* IPD = 512 Bytes */
-	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
-	out_be32(utl_base + PEUTL_PCTL, 0x80800066);	/* VRB,TXE,timeout=default */
-}
-
-/*
- * TODO: double check PCI express SDR based on the latest user manual
- *		 Some registers specified here no longer exist.. has to be
- *		 updated based on the final EAS spec.
- */
-static int check_error(void)
-{
-	u32 valPE0, valPE1;
-	int err = 0;
-
-	valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
-	valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
-
-	/* SDR0_PExRCSSET rstgu */
-	if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
-		printf("PCIE:  SDR0_PExRCSSET rstgu error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET rstdl */
-	if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
-		printf("PCIE:  SDR0_PExRCSSET rstdl error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET rstpyn */
-	if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
-		printf("PCIE:  SDR0_PExRCSSET rstpyn error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET hldplb */
-	if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
-		printf("PCIE:  SDR0_PExRCSSET hldplb error\n");
-		err = -1;
-	}
-
-	/* SDR0_PExRCSSET rdy */
-	if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
-		printf("PCIE:  SDR0_PExRCSSET rdy error\n");
-		err = -1;
-	}
-
-	return err;
-}
-
-/*
- * Initialize PCI Express core as described in User Manual
- * TODO: double check PE SDR PLL Register with the updated user manual.
- */
-int ppc4xx_init_pcie(void)
-{
-	if (check_error())
-		return -1;
-
-	return 0;
-}
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_405EX)
-static void ppc4xx_setup_utl(u32 port)
-{
-	u32 utl_base;
-
-	/*
-	 * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
-
-		break;
-	}
-	utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
-
-	/*
-	 * Set buffer allocations and then assert VRB and TXE.
-	 */
-	out_be32((u32 *)(utl_base + PEUTL_OUTTR),   0x02000000);
-	out_be32((u32 *)(utl_base + PEUTL_INTR),    0x02000000);
-	out_be32((u32 *)(utl_base + PEUTL_OPDBSZ),  0x04000000);
-	out_be32((u32 *)(utl_base + PEUTL_PBBSZ),   0x21000000);
-	out_be32((u32 *)(utl_base + PEUTL_IPHBSZ),  0x02000000);
-	out_be32((u32 *)(utl_base + PEUTL_IPDBSZ),  0x04000000);
-	out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
-	out_be32((u32 *)(utl_base + PEUTL_PCTL),    0x80800066);
-
-	out_be32((u32 *)(utl_base + PEUTL_PBCTL),   0x0800000c);
-	out_be32((u32 *)(utl_base + PEUTL_RCSTA),
-		 in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
-}
-
-int ppc4xx_init_pcie(void)
-{
-	/*
-	 * Nothing to do on 405EX
-	 */
-	return 0;
-}
-#endif /* CONFIG_405EX */
-
-/*
- * Board-specific pcie initialization
- * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
- */
-
-/*
- * Initialize various parts of the PCI Express core for our port:
- *
- * - Set as a root port and enable max width
- *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
- * - Set up UTL configuration.
- * - Increase SERDES drive strength to levels suggested by AMCC.
- * - De-assert RSTPYN, RSTDL and RSTGU.
- *
- * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
- * with default setting 0x11310000. The register has new fields,
- * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
- * hang.
- */
-#if defined(CONFIG_440SPE)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
-	u32 val = 1 << 24;
-	u32 utlset1;
-
-	if (rootport) {
-		val = PTYPE_ROOT_PORT << 20;
-		utlset1 = 0x21222222;
-	} else {
-		val = PTYPE_LEGACY_ENDPOINT << 20;
-		utlset1 = 0x20222222;
-	}
-
-	if (port == 0)
-		val |= LNKW_X8 << 12;
-	else
-		val |= LNKW_X4 << 12;
-
-	SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
-	SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
-	if (!ppc440spe_revB())
-		SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
-	SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
-	SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
-	SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
-	SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
-	if (port == 0) {
-		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
-	}
-	SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
-					    ~(1 << 24 | 1 << 16)) | 1 << 12);
-
-	return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
-	u32 val;
-	u32 utlset1;
-
-	if (rootport)
-		val = PTYPE_ROOT_PORT << 20;
-	else
-		val = PTYPE_LEGACY_ENDPOINT << 20;
-
-	if (port == 0) {
-		val |= LNKW_X1 << 12;
-		utlset1 = 0x20000000;
-	} else {
-		val |= LNKW_X4 << 12;
-		utlset1 = 0x20101101;
-	}
-
-	SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
-	SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
-	SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
-
-	switch (port) {
-	case 0:
-		SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
-		SDR_WRITE(PESDR0_L0DRV, 0x00000130);
-		SDR_WRITE(PESDR0_L0CLK, 0x00000006);
-
-		SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
-		break;
-
-	case 1:
-		SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
-		SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
-		SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
-		SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
-		SDR_WRITE(PESDR1_L0DRV, 0x00000130);
-		SDR_WRITE(PESDR1_L1DRV, 0x00000130);
-		SDR_WRITE(PESDR1_L2DRV, 0x00000130);
-		SDR_WRITE(PESDR1_L3DRV, 0x00000130);
-		SDR_WRITE(PESDR1_L0CLK, 0x00000006);
-		SDR_WRITE(PESDR1_L1CLK, 0x00000006);
-		SDR_WRITE(PESDR1_L2CLK, 0x00000006);
-		SDR_WRITE(PESDR1_L3CLK, 0x00000006);
-
-		SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
-		break;
-	}
-
-	SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
-		  (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
-
-	/* Poll for PHY reset */
-	switch (port) {
-	case 0:
-		while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
-			udelay(10);
-		break;
-	case 1:
-		while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
-			udelay(10);
-		break;
-	}
-
-	SDR_WRITE(SDRN_PESDR_RCSSET(port),
-		  (SDR_READ(SDRN_PESDR_RCSSET(port)) &
-		   ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
-		  PESDRx_RCSSET_RSTPYN);
-
-	return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_405EX)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
-	u32 val;
-
-	if (rootport)
-		val = 0x00401000;
-	else
-		val = 0x00101000;
-
-	SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
-	SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
-	SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
-	SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
-	SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
-
-	/* Assert the PE0_PHY reset */
-	SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
-	udelay(1000);
-
-	/* deassert the PE0_hotreset */
-	if (is_end_point(port))
-		SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
-	else
-		SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
-
-	/* poll for phy !reset */
-	while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
-		;
-
-	/* deassert the PE0_gpl_utl_reset */
-	SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
-
-	if (port == 0)
-		mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000);  /* guarded on */
-	else
-		mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000);  /* guarded on */
-
-	return 0;
-}
-#endif /* CONFIG_405EX */
-
-int ppc4xx_init_pcie_port_hw(int port, int rootport)
-__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
-
-/*
- * We map PCI Express configuration access into the 512MB regions
- *
- * NOTICE: revB is very strict about PLB real addressess and ranges to
- * be mapped for config space; it seems to only work with d_nnnn_nnnn
- * range (hangs the core upon config transaction attempts when set
- * otherwise) while revA uses c_nnnn_nnnn.
- *
- * For 440SPe revA:
- *     PCIE0: 0xc_4000_0000
- *     PCIE1: 0xc_8000_0000
- *     PCIE2: 0xc_c000_0000
- *
- * For 440SPe revB:
- *     PCIE0: 0xd_0000_0000
- *     PCIE1: 0xd_2000_0000
- *     PCIE2: 0xd_4000_0000
- *
- * For 405EX:
- *     PCIE0: 0xa000_0000
- *     PCIE1: 0xc000_0000
- *
- * For 460EX/GT:
- *     PCIE0: 0xd_0000_0000
- *     PCIE1: 0xd_2000_0000
- */
-static inline u64 ppc4xx_get_cfgaddr(int port)
-{
-#if defined(CONFIG_405EX)
-	if (port == 0)
-		return (u64)CONFIG_SYS_PCIE0_CFGBASE;
-	else
-		return (u64)CONFIG_SYS_PCIE1_CFGBASE;
-#endif
-#if defined(CONFIG_440SPE)
-	if (ppc440spe_revB()) {
-		switch (port) {
-		default:	/* to satisfy compiler */
-		case 0:
-			return 0x0000000d00000000ULL;
-		case 1:
-			return 0x0000000d20000000ULL;
-		case 2:
-			return 0x0000000d40000000ULL;
-		}
-	} else {
-		switch (port) {
-		default:	/* to satisfy compiler */
-		case 0:
-			return 0x0000000c40000000ULL;
-		case 1:
-			return 0x0000000c80000000ULL;
-		case 2:
-			return 0x0000000cc0000000ULL;
-		}
-	}
-#endif
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-	if (port == 0)
-		return 0x0000000d00000000ULL;
-	else
-		return 0x0000000d20000000ULL;
-#endif
-}
-
-/*
- *  4xx boards as endpoint and root point setup
- *                    and
- *    testing inbound and out bound windows
- *
- *  4xx boards can be plugged into another 4xx boards or you can get PCI-E
- *  cable which can be used to setup loop back from one port to another port.
- *  Please rememeber that unless there is a endpoint plugged in to root port it
- *  will not initialize. It is the same in case of endpoint , unless there is
- *  root port attached it will not initialize.
- *
- *  In this release of software all the PCI-E ports are configured as either
- *  endpoint or rootpoint.In future we will have support for selective ports
- *  setup as endpoint and root point in single board.
- *
- *  Once your board came up as root point , you can verify by reading
- *  /proc/bus/pci/devices. Where you can see the configuration registers
- *  of endpoint device attached to the port.
- *
- *  Enpoint cofiguration can be verified by connecting 4xx board to any
- *  host or another 4xx board. Then try to scan the device. In case of
- *  linux use "lspci" or appripriate os command.
- *
- *  How do I verify the inbound and out bound windows ? (4xx to 4xx)
- *  in this configuration inbound and outbound windows are setup to access
- *  sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
- *  is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
- *  This is waere your POM(PLB out bound memory window) mapped. then
- *  read the data from other 4xx board's u-boot prompt at address
- *  0x9000 0000(SRAM). Data should match.
- *  In case of inbound , write data to u-boot command prompt at 0xb000 0000
- *  which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
- *  data at 0x9000 0000(SRAM).Data should match.
- */
-int ppc4xx_init_pcie_port(int port, int rootport)
-{
-	static int core_init;
-	volatile u32 val = 0;
-	int attempts;
-	u64 addr;
-	u32 low, high;
-
-	if (!core_init) {
-		if (ppc4xx_init_pcie())
-			return -1;
-		++core_init;
-	}
-
-	/*
-	 * Initialize various parts of the PCI Express core for our port
-	 */
-	ppc4xx_init_pcie_port_hw(port, rootport);
-
-	/*
-	 * Notice: the following delay has critical impact on device
-	 * initialization - if too short (<50ms) the link doesn't get up.
-	 */
-	mdelay(100);
-
-	val = SDR_READ(SDRN_PESDR_RCSSTS(port));
-	if (val & (1 << 20)) {
-		printf("PCIE%d: PGRST failed %08x\n", port, val);
-		return -1;
-	}
-
-	/*
-	 * Verify link is up
-	 */
-	val = SDR_READ(SDRN_PESDR_LOOP(port));
-	if (!(val & 0x00001000)) {
-		printf("PCIE%d: link is not up.\n", port);
-		return -ENODEV;
-	}
-
-	/*
-	 * Setup UTL registers - but only on revA!
-	 * We use default settings for revB chip.
-	 */
-	if (!ppc440spe_revB())
-		ppc4xx_setup_utl(port);
-
-	/*
-	 * We map PCI Express configuration access into the 512MB regions
-	 */
-	addr = ppc4xx_get_cfgaddr(port);
-	low = U64_TO_U32_LOW(addr);
-	high = U64_TO_U32_HIGH(addr);
-
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
-		break;
-	case 1:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
-		break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-	case 2:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
-		break;
-#endif
-	}
-
-	/*
-	 * Check for VC0 active and assert RDY.
-	 */
-	attempts = 10;
-	while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
-		if (!(attempts--)) {
-			printf("PCIE%d: VC0 not active\n", port);
-			return -1;
-		}
-		mdelay(1000);
-	}
-	SDR_WRITE(SDRN_PESDR_RCSSET(port),
-		  SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
-	mdelay(100);
-
-	return 0;
-}
-
-int ppc4xx_init_pcie_rootport(int port)
-{
-	return ppc4xx_init_pcie_port(port, 1);
-}
-
-int ppc4xx_init_pcie_endport(int port)
-{
-	return ppc4xx_init_pcie_port(port, 0);
-}
-
-void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
-{
-	volatile void *mbase = NULL;
-	volatile void *rmbase = NULL;
-
-	pci_set_ops(hose,
-		    pcie_read_config_byte,
-		    pcie_read_config_word,
-		    pcie_read_config_dword,
-		    pcie_write_config_byte,
-		    pcie_write_config_word,
-		    pcie_write_config_dword);
-
-	switch (port) {
-	case 0:
-		mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
-		rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
-		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
-		break;
-	case 1:
-		mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
-		rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
-		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
-		break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-	case 2:
-		mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
-		rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
-		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
-		break;
-#endif
-	}
-
-	/*
-	 * Set bus numbers on our root port
-	 */
-	out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
-	out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
-	out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
-
-	/*
-	 * Set up outbound translation to hose->mem_space from PLB
-	 * addresses at an offset of 0xd_0000_0000.  We set the low
-	 * bits of the mask to 11 to turn off splitting into 8
-	 * subregions and to enable the outbound translation.
-	 */
-	out_le32(mbase + PECFG_POM0LAH, 0x00000000);
-	out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
-		 port * CONFIG_SYS_PCIE_MEMSIZE);
-	debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
-	      in_le32(mbase + PECFG_POM0LAL));
-
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
-		      port * CONFIG_SYS_PCIE_MEMSIZE);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
-		debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
-		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
-		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
-		      mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
-		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
-		break;
-	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
-		      port * CONFIG_SYS_PCIE_MEMSIZE);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
-		debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
-		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
-		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
-		      mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
-		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
-		break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
-		      port * CONFIG_SYS_PCIE_MEMSIZE);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
-		debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
-		      mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
-		      mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
-		      mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
-		      mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
-		break;
-#endif
-	}
-
-	/* Set up 4GB inbound memory window at 0 */
-	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
-	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-	out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff);
-	out_le32(mbase + PECFG_BAR0LMPA, 0);
-
-	out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
-	out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
-	out_le32(mbase + PECFG_PIM0LAL, 0);
-	out_le32(mbase + PECFG_PIM0LAH, 0);
-	out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
-	out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
-	out_le32(mbase + PECFG_PIMEN, 0x1);
-
-	/* Enable I/O, Mem, and Busmaster cycles */
-	out_le16((u16 *)(mbase + PCI_COMMAND),
-		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
-		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-	/* Set Device and Vendor Id */
-	out_le16(mbase + 0x200, 0xaaa0 + port);
-	out_le16(mbase + 0x202, 0xbed0 + port);
-
-	/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
-	out_le32(mbase + 0x208, 0x06040001);
-
-	printf("PCIE%d: successfully set as root-complex\n", port);
-}
-
-int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
-{
-	volatile void *mbase = NULL;
-	int attempts = 0;
-
-	pci_set_ops(hose,
-		    pcie_read_config_byte,
-		    pcie_read_config_word,
-		    pcie_read_config_dword,
-		    pcie_write_config_byte,
-		    pcie_write_config_word,
-		    pcie_write_config_dword);
-
-	switch (port) {
-	case 0:
-		mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
-		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
-		break;
-	case 1:
-		mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
-		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
-		break;
-#if defined(CONFIG_SYS_PCIE2_CFGBASE)
-	case 2:
-		mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
-		hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
-		break;
-#endif
-	}
-
-	/*
-	 * Set up outbound translation to hose->mem_space from PLB
-	 * addresses at an offset of 0xd_0000_0000.  We set the low
-	 * bits of the mask to 11 to turn off splitting into 8
-	 * subregions and to enable the outbound translation.
-	 */
-	out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
-	out_le32(mbase + PECFG_POM0LAL, 0x00001000);
-
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
-		      port * CONFIG_SYS_PCIE_MEMSIZE);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
-		break;
-	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
-		      port * CONFIG_SYS_PCIE_MEMSIZE);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
-		break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
-	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
-		      port * CONFIG_SYS_PCIE_MEMSIZE);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
-		break;
-#endif
-	}
-
-	/* Set up 64MB inbound memory window at 0 */
-	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
-	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-
-	out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
-	out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
-
-	/* Setup BAR0 */
-	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
-	out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
-
-	/* Disable BAR1 & BAR2 */
-	out_le32(mbase + PECFG_BAR1MPA, 0);
-	out_le32(mbase + PECFG_BAR2HMPA, 0);
-	out_le32(mbase + PECFG_BAR2LMPA, 0);
-
-	out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
-	out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
-	out_le32(mbase + PECFG_PIMEN, 0x1);
-
-	/* Enable I/O, Mem, and Busmaster cycles */
-	out_le16((u16 *)(mbase + PCI_COMMAND),
-		 in_le16((u16 *)(mbase + PCI_COMMAND)) |
-		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	out_le16(mbase + 0x200, 0xcaad);		/* Setting vendor ID */
-	out_le16(mbase + 0x202, 0xfeed);		/* Setting device ID */
-
-	/* Set Class Code to Processor/PPC */
-	out_le32(mbase + 0x208, 0x0b200001);
-
-	attempts = 10;
-	while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
-		if (!(attempts--)) {
-			printf("PCIE%d: BME not active\n", port);
-			return -1;
-		}
-		mdelay(1000);
-	}
-
-	printf("PCIE%d: successfully set as endpoint\n", port);
-
-	return 0;
-}
-#endif /* CONFIG_440SPE && CONFIG_PCI */