diff options
| author | wdenk <wdenk> | 2004-02-06 23:19:44 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-02-06 23:19:44 +0000 |
| commit | ba56f625767d058b0e05a22729de13be5e0f6334 (patch) | |
| tree | 196b8fdb07802d9a64ca8e0278906a1a9279c6fe /cpu/ppc4xx/serial.c | |
| parent | a6cccaea5a4743f4e4fb93a3ae9537e7357c783b (diff) | |
Patch by Travis Sawyer, 30 Dec 2003:
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
select MDI port based on enabled EMAC device.
Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
base PrPMC board.
Diffstat (limited to 'cpu/ppc4xx/serial.c')
| -rw-r--r-- | cpu/ppc4xx/serial.c | 25 |
1 files changed, 24 insertions, 1 deletions
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c index 6b0e39a58e..2c77338f21 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/serial.c @@ -271,9 +271,15 @@ int serial_tstc () #if defined(CONFIG_440) #define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200 #define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300 +#if defined(CONFIG_440_GX) +#define CR0_MASK 0xdfffffff +#define CR0_EXTCLK_ENA 0x00800000 +#define CR0_UDIV_POS 0 +#else #define CR0_MASK 0x3fff0000 #define CR0_EXTCLK_ENA 0x00600000 #define CR0_UDIV_POS 16 +#endif /* CONFIG_440_GX */ #elif defined(CONFIG_405EP) #define UART0_BASE 0xef600300 #define UART1_BASE 0xef600400 @@ -295,9 +301,17 @@ int serial_tstc () #if defined(CONFIG_UART1_CONSOLE) #define ACTING_UART0_BASE UART1_BASE #define ACTING_UART1_BASE UART0_BASE +#if defined(CONFIG_440_GX) +#define UART0_SDR sdr_uart1 +#define UART1_SDR sdr_uart0 +#endif /* CONFIG_440_GX */ #else #define ACTING_UART0_BASE UART0_BASE #define ACTING_UART1_BASE UART1_BASE +#if defined(CONFIG_440_GX) +#define UART0_SDR sdr_uart0 +#define UART1_SDR sdr_uart1 +#endif /* CONFIG_440_GX */ #endif #if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK) @@ -416,7 +430,12 @@ int serial_init (void) unsigned long tmp; #endif +#if defined(CONFIG_440_GX) + mfsdr(UART0_SDR,reg); + reg &= ~CR0_MASK; +#else reg = mfdcr(cntrl0) & ~CR0_MASK; +#endif /* CONFIG_440_GX */ #ifdef CFG_EXT_SERIAL_CLOCK reg |= CR0_EXTCLK_ENA; udiv = 1; @@ -430,9 +449,13 @@ int serial_init (void) serial_divs (gd->baudrate, &udiv, &bdiv); #endif +#if defined(CONFIG_440_GX) + reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */ + mtsdr (UART0_SDR,reg); +#else reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */ mtdcr (cntrl0, reg); - +#endif out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */ out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */ out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */ |