Changed PPC44x startup message (cpu info, speed...) to common style:

On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.

Patch by Stefan Roese, 27 Nov 2005

1 files changed, 131 insertions, 102 deletions

diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index d721e46b5b..6c619530f4 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -38,122 +38,114 @@
 #include <ppc4xx.h>
 
 
+#if defined(CONFIG_405GP)
+#define PCI_ARBITER_ENABLED	(mfdcr(strap) & PSR_PCI_ARBIT_EN)
+#define PCI_ASYNC_ENABLED	(mfdcr(strap) & PSR_PCI_ASYNC_EN)
+#endif
+
+#if defined(CONFIG_405EP)
+#define PCI_ARBITER_ENABLED	(mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN)
+#define I2C_BOOTROM_ENABLED	(mfdcr(cpc0_boot) & CPC0_BOOT_SEP)
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define SDR0_SDSTP1_PAE		(0x80000000 >> 21)
+#define SDR0_SDSTP1_PAME	(0x80000000 >> 27)
+
+#define PCI_ARBITER_ENABLED	(mfdcr(cpc0_strp1) & SDR0_SDSTP1_PAE)
+#define PCI_ASYNC_ENABLED	(mfdcr(cpc0_strp1) & SDR0_SDSTP1_PAME)
+#endif
+
+#if defined(CONFIG_440GP)
+#define CPC0_STRP1_PAE		(0x80000000 >> 11)
+
+#define PCI_ARBITER_ENABLED	(mfdcr(cpc0_strp1) & CPC0_STRP1_PAE)
+#endif
+
+#if defined(CONFIG_440GX)
+#define SDR0_SDSTP1_PAE		(0x80000000 >> 13)
+
+#define PCI_ARBITER_ENABLED	(mfdcr(cpc0_strp1) & SDR0_SDSTP1_PAE)
+#endif
+
+#if defined(CONFIG_440)
+#define FREQ_EBC		(sys_info.freqEPB)
+#else
+#define FREQ_EBC		(sys_info.freqPLB / sys_info.pllExtBusDiv)
+#endif
+
+
 #if defined(CONFIG_440)
-static int do_chip_reset( unsigned long sys0, unsigned long sys1 );
+static int do_chip_reset(unsigned long sys0, unsigned long sys1);
 #endif
 
-/* ------------------------------------------------------------------------- */
 
 int checkcpu (void)
 {
-#if defined(CONFIG_405GP) || \
-    defined(CONFIG_405CR) || \
-    defined(CONFIG_405EP) || \
-    defined(CONFIG_440)   || \
-    defined(CONFIG_IOP480)
-	uint pvr = get_pvr();
-#endif
-#if defined(CONFIG_405GP) || \
-    defined(CONFIG_405CR) || \
-    defined(CONFIG_405EP) || \
-    defined(CONFIG_IOP480)
+#if !defined(CONFIG_405)	/* not used on Xilinx 405 FPGA implementations */
 	DECLARE_GLOBAL_DATA_PTR;
-
+	uint pvr = get_pvr();
 	ulong clock = gd->cpu_clk;
 	char buf[32];
-#endif
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP)
-	PPC405_SYS_INFO sys_info;
+#if !defined(CONFIG_IOP480)
+	sys_info_t sys_info;
 
 	puts ("CPU:   ");
 
 	get_sys_info(&sys_info);
 
-#ifdef CONFIG_405GP
-	puts ("AMCC PowerPC 405GP");
-	if (pvr == PVR_405GPR_RB) {
-		putc('r');
-	}
-	puts (" Rev. ");
-#endif
-#ifdef CONFIG_405CR
-	puts ("AMCC PowerPC 405CR Rev. ");
+	puts("AMCC PowerPC 4");
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP)
+	puts("05");
 #endif
-#ifdef CONFIG_405EP
-	puts ("AMCC PowerPC 405EP Rev. ");
+#if defined(CONFIG_440)
+	puts("40");
 #endif
+
 	switch (pvr) {
 	case PVR_405GP_RB:
-	case PVR_405GPR_RB:
-		putc('B');
+		puts("GP Rev. B");
 		break;
+
 	case PVR_405GP_RC:
-#ifdef CONFIG_405CR
-	case PVR_405CR_RC:
-#endif
-		putc('C');
+		puts("GP Rev. C");
 		break;
+
 	case PVR_405GP_RD:
-		putc('D');
+		puts("GP Rev. D");
 		break;
+
 #ifdef CONFIG_405GP
-	case PVR_405GP_RE:
-		putc('E');
+	case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */
+		puts("GP Rev. E");
 		break;
 #endif
+
 	case PVR_405CR_RA:
-		putc('A');
+		puts("CR Rev. A");
 		break;
+
 	case PVR_405CR_RB:
-	case PVR_405EP_RB:
-		putc('B');
-		break;
-	default:
-		printf ("? (PVR=%08x)", pvr);
+		puts("CR Rev. B");
 		break;
-	}
-
-	printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
-	       sys_info.freqPLB / 1000000,
-	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
-	       sys_info.freqPLB / sys_info.pllExtBusDiv / 1000000);
 
-#if defined(CONFIG_405GP)
-	if (mfdcr(strap) & PSR_PCI_ASYNC_EN) {
-		printf ("       PCI async ext clock used, ");
-	} else {
-		printf ("       PCI sync clock at %lu MHz, ",
-		       sys_info.freqPLB / sys_info.pllPciDiv / 1000000);
-	}
-	printf ("%sternal PCI arbiter enabled\n",
-		(mfdcr(strap) & PSR_PCI_ARBIT_EN) ? "in" : "ex");
-#elif defined(CONFIG_405EP)
-	printf ("       IIC Boot EEPROM %sabled\n",
-		(mfdcr(cpc0_boot) & CPC0_BOOT_SEP) ? "en" : "dis");
-	printf ("       PCI async ext clock used, ");
-	printf ("%sternal PCI arbiter enabled\n",
-		(mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN) ? "in" : "ex");
+#ifdef CONFIG_405CR
+	case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */
+		puts("CR Rev. C");
+		break;
 #endif
 
-#if defined(CONFIG_405EP)
-	printf ("       16 kB I-Cache 16 kB D-Cache");
-#else
-	printf ("       16 kB I-Cache %d kB D-Cache",
-		((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
-#endif
-#endif  /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
+	case PVR_405GPR_RB:
+		puts("GPr Rev. B");
+		break;
 
-#ifdef CONFIG_IOP480
-	printf ("PLX IOP480 (PVR=%08x)", pvr);
-	printf (" at %s MHz:", strmhz(buf, clock));
-	printf (" %u kB I-Cache", 4);
-	printf (" %u kB D-Cache", 2);
-#endif
+	case PVR_405EP_RB:
+		puts("EP Rev. B");
+		break;
 
 #if defined(CONFIG_440)
-	puts ("AMCC PowerPC 440");
-	switch(pvr) {
 	case PVR_440GP_RB:
 		puts("GP Rev. B");
 		/* See errata 1.12: CHIP_4 */
@@ -166,40 +158,96 @@ int checkcpu (void)
 					mfdcr(cpc0_strp1) );
 		}
 		break;
+
 	case PVR_440GP_RC:
 		puts("GP Rev. C");
 		break;
+
 	case PVR_440GX_RA:
 		puts("GX Rev. A");
 		break;
+
 	case PVR_440GX_RB:
 		puts("GX Rev. B");
 		break;
+
 	case PVR_440GX_RC:
 		puts("GX Rev. C");
 		break;
+
 	case PVR_440GX_RF:
 		puts("GX Rev. F");
 		break;
+
 	case PVR_440EP_RA:
 		puts("EP Rev. A");
 		break;
+
 #ifdef CONFIG_440EP
 	case PVR_440EP_RB: /* 440EP rev B and 440GR rev A have same PVR */
 		puts("EP Rev. B");
 		break;
 #endif /*  CONFIG_440EP */
+
 #ifdef CONFIG_440GR
 	case PVR_440GR_RA: /* 440EP rev B and 440GR rev A have same PVR */
 		puts("GR Rev. A");
 		break;
 #endif /* CONFIG_440GR */
+#endif /* CONFIG_440 */
+
 	default:
 		printf (" UNKNOWN (PVR=%08x)", pvr);
 		break;
 	}
+
+	printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
+	       sys_info.freqPLB / 1000000,
+	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
+	       FREQ_EBC / 1000000);
+
+#if defined(I2C_BOOTROM_ENABLED)
+	printf ("       IIC Boot EEPROM %sabled\n", I2C_BOOTROM_ENABLED ? "en" : "dis");
+#endif
+
+#if defined(PCI_ARBITER_ENABLED)
+	printf ("       %sternal PCI arbiter enabled",
+		(PCI_ARBITER_ENABLED) ? "In" : "Ex");
+#endif
+
+#if defined(PCI_ASYNC_ENABLED)
+	if (PCI_ASYNC_ENABLED) {
+		printf (", PCI async ext clock used");
+	} else {
+		printf (", PCI sync clock at %lu MHz",
+		       sys_info.freqPLB / sys_info.pllPciDiv / 1000000);
+	}
 #endif
-	puts ("\n");
+
+#if defined(PCI_ARBITER_ENABLED) || defined(PCI_ASYNC_ENABLED)
+	putc('\n');
+#endif
+
+#if defined(CONFIG_405EP)
+	printf ("       16 kB I-Cache 16 kB D-Cache");
+#elif defined(CONFIG_440)
+	printf ("       32 kB I-Cache 32 kB D-Cache");
+#else
+	printf ("       16 kB I-Cache %d kB D-Cache",
+		((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
+#endif
+#endif /* !defined(CONFIG_IOP480) */
+
+#if defined(CONFIG_IOP480)
+	printf ("PLX IOP480 (PVR=%08x)", pvr);
+	printf (" at %s MHz:", strmhz(buf, clock));
+	printf (" %u kB I-Cache", 4);
+	printf (" %u kB D-Cache", 2);
+#endif
+
+#endif /* !defined(CONFIG_405) */
+
+	putc ('\n');
 
 	return 0;
 }
@@ -230,8 +278,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 #if defined(CONFIG_440)
-static
-int do_chip_reset (unsigned long sys0, unsigned long sys1)
+static int do_chip_reset (unsigned long sys0, unsigned long sys1)
 {
 	/* Changes to cpc0_sys0 and cpc0_sys1 require chip
 	 * reset.
@@ -252,31 +299,13 @@ int do_chip_reset (unsigned long sys0, unsigned long sys1)
  */
 unsigned long get_tbclk (void)
 {
-#if defined(CONFIG_440)
-
+#if !defined(CONFIG_IOP480)
 	sys_info_t  sys_info;
 
 	get_sys_info(&sys_info);
 	return (sys_info.freqProcessor);
-
-#elif defined(CONFIG_405GP) || \
-      defined(CONFIG_405CR) || \
-      defined(CONFIG_405) || \
-      defined(CONFIG_405EP)
-
-	PPC405_SYS_INFO sys_info;
-
-	get_sys_info(&sys_info);
-	return (sys_info.freqProcessor);
-
-#elif defined(CONFIG_IOP480)
-
-	return (66000000);
-
 #else
-
-# error get_tbclk() not implemented
-
+	return (66000000);
 #endif
 
 }