Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx

5 files changed, 279 insertions, 43 deletions

diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index 4b9dcc8180..bb96f774fe 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -29,7 +29,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  spd_sdram.o qe_io.o
+	  spd_sdram.o qe_io.o pci.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index e934ba638f..e078f27a23 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -52,13 +52,26 @@ int checkcpu(void)
 
 	immr = (immap_t *)CFG_IMMR;
 
-	if ((pvr & 0xFFFF0000) != PVR_83xx) {
-		puts("Not MPC83xx Family!!!\n");
-		return -1;
+	puts("CPU:   ");
+
+	switch (pvr & 0xffff0000) {
+		case PVR_E300C1:
+			printf("e300c1, ");
+			break;
+
+		case PVR_E300C2:
+			printf("e300c2, ");
+			break;
+
+		case PVR_E300C3:
+			printf("e300c3, ");
+			break;
+
+		default:
+			printf("Unknown core, ");
 	}
 
 	spridr = immr->sysconf.spridr;
-	puts("CPU: ");
 	switch(spridr) {
 	case SPR_8349E_REV10:
 	case SPR_8349E_REV11:
@@ -124,6 +137,18 @@ int checkcpu(void)
 	case SPR_8321_REV11:
 		puts("MPC8321, ");
 		break;
+	case SPR_8311_REV10:
+		puts("MPC8311, ");
+		break;
+	case SPR_8311E_REV10:
+		puts("MPC8311E, ");
+		break;
+	case SPR_8313_REV10:
+		puts("MPC8313, ");
+		break;
+	case SPR_8313E_REV10:
+		puts("MPC8313E, ");
+		break;
 	default:
 		puts("Rev: Unknown revision number.\nWarning: Unsupported cpu revision!\n");
 		return 0;
@@ -133,10 +158,12 @@ int checkcpu(void)
 	/* Multiple revisons of 834x processors may have the same SPRIDR value.
 	 * So use PVR to identify the revision number.
 	 */
-	printf("Rev: %02x at %s MHz\n", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock));
+	printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock));
 #else
-	printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock));
+	printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock));
 #endif
+	printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000);
+
 	return 0;
 }
 
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
new file mode 100644
index 0000000000..785d6129da
--- /dev/null
+++ b/cpu/mpc83xx/pci.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2007
+ *
+ * Author: Scott Wood <scottwood@freescale.com>,
+ * with some bits from older board-specific PCI initialization.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <ft_build.h>
+#include <asm/mpc8349_pci.h>
+
+#ifdef CONFIG_83XX_GENERIC_PCI
+#define MAX_BUSES 2
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pci_controller pci_hose[MAX_BUSES];
+static int pci_num_buses;
+
+static void pci_init_bus(int bus, struct pci_region *reg)
+{
+	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile pot83xx_t *pot = immr->ios.pot;
+	volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
+	struct pci_controller *hose = &pci_hose[bus];
+	u32 dev;
+	u16 reg16;
+	int i;
+
+	if (bus == 1)
+		pot += 3;
+
+	/* Setup outbound translation windows */
+	for (i = 0; i < 3; i++, reg++, pot++) {
+		if (reg->size == 0)
+			break;
+
+		hose->regions[i] = *reg;
+		hose->region_count++;
+
+		pot->potar = reg->bus_start >> 12;
+		pot->pobar = reg->phys_start >> 12;
+		pot->pocmr = ~(reg->size - 1) >> 12;
+
+		if (reg->flags & PCI_REGION_IO)
+			pot->pocmr |= POCMR_IO;
+#ifdef CONFIG_83XX_PCI_STREAMING
+		else if (reg->flags & PCI_REGION_PREFETCH)
+			pot->pocmr |= POCMR_SE;
+#endif
+
+		if (bus == 1)
+			pot->pocmr |= POCMR_DST;
+
+		pot->pocmr |= POCMR_EN;
+	}
+
+	/* Point inbound translation at RAM */
+	pci_ctrl->pitar1 = 0;
+	pci_ctrl->pibar1 = 0;
+	pci_ctrl->piebar1 = 0;
+	pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+	                   PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+	i = hose->region_count++;
+	hose->regions[i].bus_start = 0;
+	hose->regions[i].phys_start = 0;
+	hose->regions[i].size = gd->ram_size;
+	hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_MEMORY;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	pci_setup_indirect(hose, CFG_IMMR + 0x8300 + bus * 0x80,
+	                         CFG_IMMR + 0x8304 + bus * 0x80);
+
+	pci_register_hose(hose);
+
+	/*
+	 * Write to Command register
+	 */
+	reg16 = 0xff;
+	dev = PCI_BDF(hose->first_busno, 0, 0);
+	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
+	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+	/*
+	 * Clear non-reserved bits in status register.
+	 */
+	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+	printf("PCI:   Bus Dev VenId DevId Class Int\n");
+#endif
+	/*
+	 * Hose scan.
+	 */
+	hose->last_busno = pci_hose_scan(hose);
+}
+
+/*
+ * The caller must have already set OCCR, and the PCI_LAW BARs
+ * must have been set to cover all of the requested regions.
+ *
+ * If fewer than three regions are requested, then the region
+ * list is terminated with a region of size 0.
+ */
+void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
+{
+	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	int i;
+
+	if (num_buses > MAX_BUSES) {
+		printf("%d PCI buses requsted, %d supported\n",
+		       num_buses, MAX_BUSES);
+
+		num_buses = MAX_BUSES;
+	}
+
+	pci_num_buses = num_buses;
+
+	/*
+	 * Release PCI RST Output signal.
+	 * Power on to RST high must be at least 100 ms as per PCI spec.
+	 * On warm boots only 1 ms is required.
+	 */
+	udelay(warmboot ? 1000 : 100000);
+
+	for (i = 0; i < num_buses; i++)
+		immr->pci_ctrl[i].gcr = 1;
+
+	/*
+	 * RST high to first config access must be at least 2^25 cycles
+	 * as per PCI spec.  This could be cut in half if we know we're
+	 * running at 66MHz.  This could be insufficiently long if we're
+	 * running the PCI bus at significantly less than 33MHz.
+	 */
+	udelay(1020000);
+
+	for (i = 0; i < num_buses; i++)
+		pci_init_bus(i, reg[i]);
+}
+
+#ifdef CONFIG_OF_FLAT_TREE
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	if (pci_num_buses < 1)
+		return;
+
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+	if (p) {
+		p[0] = pci_hose[0].first_busno;
+		p[1] = pci_hose[0].last_busno;
+	}
+
+	if (pci_num_buses < 2)
+		return;
+
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
+	if (p) {
+		p[0] = pci_hose[1].first_busno;
+		p[1] = pci_hose[1].last_busno;
+	}
+}
+#endif /* CONFIG_OF_FLAT_TREE */
+
+#endif /* CONFIG_83XX_GENERIC_PCI */
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index d9b8753ca0..647813f68d 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -58,8 +58,8 @@ picos_to_clk(int picos)
 	int clks;
 
 	ddr_bus_clk = gd->ddr_clk >> 1;
-	clks = picos / ((1000000000 / ddr_bus_clk) * 1000);
-	if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0)
+	clks = picos / (1000000000 / (ddr_bus_clk / 1000));
+	if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0)
 		clks++;
 
 	return clks;
@@ -624,7 +624,7 @@ long int spd_sdram()
 			 | (1 << (16 + 10))             /* DQS Differential disable */
 			 | (add_lat << (16 + 3))        /* Additive Latency in EMRS1 */
 			 | (mode_odt_enable << 16)      /* ODT Enable in EMRS1 */
-			 | ((twr_clk >> 1) << 9)        /* Write Recovery Autopre */
+			 | ((twr_clk - 1) << 9)         /* Write Recovery Autopre */
 			 | (caslat << 4)                /* caslat */
 			 | (burstlen << 0)              /* Burst length */
 			);
@@ -693,11 +693,6 @@ long int spd_sdram()
 
 #ifdef CFG_DDR_SDRAM_CLK_CNTL	/* Optional platform specific value */
 	ddr->sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
-#else
-	/* SS_EN = 0, source synchronous disable
-	 * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
-	 */
-	ddr->sdram_clk_cntl = 0x00000000;
 #endif
 	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
 
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index c75993059e..bf30616548 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -25,6 +25,7 @@
 
 #include <common.h>
 #include <mpc83xx.h>
+#include <command.h>
 #include <asm/processor.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -99,12 +100,14 @@ int get_clocks(void)
 	u32 lcrr;
 
 	u32 csb_clk;
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
-	u32 usbmph_clk;
 	u32 usbdr_clk;
 #endif
+#ifdef CONFIG_MPC834X
+	u32 usbmph_clk;
+#endif
 	u32 core_clk;
 	u32 i2c1_clk;
 #if !defined(CONFIG_MPC832X)
@@ -148,7 +151,7 @@ int get_clocks(void)
 
 	sccr = im->clk.sccr;
 
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
 	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
 	case 0:
 		tsec1_clk = 0;
@@ -167,6 +170,26 @@ int get_clocks(void)
 		return -4;
 	}
 
+	switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
+	case 0:
+		usbdr_clk = 0;
+		break;
+	case 1:
+		usbdr_clk = csb_clk;
+		break;
+	case 2:
+		usbdr_clk = csb_clk / 2;
+		break;
+	case 3:
+		usbdr_clk = csb_clk / 3;
+		break;
+	default:
+		/* unkown SCCR_USBDRCM value */
+		return -8;
+	}
+#endif
+
+#if defined(CONFIG_MPC834X)
 	switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
 	case 0:
 		tsec2_clk = 0;
@@ -205,24 +228,6 @@ int get_clocks(void)
 		return -7;
 	}
 
-	switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
-	case 0:
-		usbdr_clk = 0;
-		break;
-	case 1:
-		usbdr_clk = csb_clk;
-		break;
-	case 2:
-		usbdr_clk = csb_clk / 2;
-		break;
-	case 3:
-		usbdr_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_USBDRCM value */
-		return -8;
-	}
-
 	if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
 		/* if USB MPH clock is not disabled and
 		 * USB DR clock is not disabled then
@@ -230,8 +235,16 @@ int get_clocks(void)
 		 */
 		return -9;
 	}
+#elif defined(CONFIG_MPC831X)
+	tsec2_clk = tsec1_clk;
+
+	if (!(sccr & SCCR_TSEC1ON))
+		tsec1_clk = 0;
+	if (!(sccr & SCCR_TSEC2ON))
+		tsec2_clk = 0;
 #endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+
+#if !defined(CONFIG_MPC834X)
 	i2c1_clk = csb_clk;
 #endif
 #if !defined(CONFIG_MPC832X)
@@ -314,12 +327,14 @@ int get_clocks(void)
 #endif
 
 	gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
 	gd->tsec1_clk = tsec1_clk;
 	gd->tsec2_clk = tsec2_clk;
-	gd->usbmph_clk = usbmph_clk;
 	gd->usbdr_clk = usbdr_clk;
 #endif
+#if defined(CONFIG_MPC834X)
+	gd->usbmph_clk = usbmph_clk;
+#endif
 	gd->core_clk = core_clk;
 	gd->i2c1_clk = i2c1_clk;
 #if !defined(CONFIG_MPC832X)
@@ -351,11 +366,11 @@ ulong get_bus_freq(ulong dummy)
 	return gd->csb_clk;
 }
 
-int print_clock_conf(void)
+int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	printf("Clock configuration:\n");
-	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
 	printf("  Core:                %4d MHz\n", gd->core_clk / 1000000);
+	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
 #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
 	printf("  QE:                  %4d MHz\n", gd->qe_clk / 1000000);
 	printf("  BRG:                 %4d MHz\n", gd->brg_clk / 1000000);
@@ -371,11 +386,18 @@ int print_clock_conf(void)
 #if !defined(CONFIG_MPC832X)
 	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
 #endif
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
 	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
 	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
-	printf("  USB MPH:             %4d MHz\n", gd->usbmph_clk / 1000000);
 	printf("  USB DR:              %4d MHz\n", gd->usbdr_clk / 1000000);
 #endif
+#if defined(CONFIG_MPC834X)
+	printf("  USB MPH:             %4d MHz\n", gd->usbmph_clk / 1000000);
+#endif
 	return 0;
 }
+
+U_BOOT_CMD(clocks, 1, 0, do_clocks,
+	"clocks  - print clock configuration\n",
+	"    clocks\n"
+);