Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xx

6 files changed, 95 insertions, 75 deletions

diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 0507c47e6e..63176d2841 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004,2007 Freescale Semiconductor, Inc.
  * (C) Copyright 2002, 2003 Motorola Inc.
  * Xianghua Xiao (X.Xiao@motorola.com)
  *
@@ -70,6 +70,15 @@ int checkcpu (void)
 	case SVR_8548_E:
 		puts("8548_E");
 		break;
+	case SVR_8544:
+                puts("8544");
+                break;
+        case SVR_8544_E:
+                puts("8544_E");
+                break;
+        case SVR_8568_E:
+                puts("8568_E");
+                break;
 	default:
 		puts("Unknown");
 		break;
@@ -112,7 +121,7 @@ int checkcpu (void)
 #endif
 	clkdiv = lcrr & 0x0f;
 	if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#ifdef CONFIG_MPC8548
+#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544)
 		/*
 		 * Yes, the entire PQ38 family use the same
 		 * bit-representation for twice the clock divider values.
@@ -140,16 +149,25 @@ int checkcpu (void)
 
 int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
 {
+	uint pvr;
+	uint ver;
+	pvr = get_pvr();
+	ver = PVR_VER(pvr);
+	if (ver & 1){
+	/* e500 v2 core has reset control register */
+		volatile unsigned int * rstcr;
+		rstcr = (volatile unsigned int *)(CFG_IMMR + 0xE00B0);
+		*rstcr = 0x2;           /* HRESET_REQ */
+	}else{
 	/*
 	 * Initiate hard reset in debug control register DBCR0
 	 * Make sure MSR[DE] = 1
 	 */
-	unsigned long val;
-
-	val = mfspr(DBCR0);
-	val |= 0x70000000;
-	mtspr(DBCR0,val);
-
+		unsigned long val;
+		val = mfspr(DBCR0);
+		val |= 0x70000000;
+		mtspr(DBCR0,val);
+	}
 	return 1;
 }
 
@@ -183,9 +201,9 @@ reset_85xx_watchdog(void)
 	 * Clear TSR(WIS) bit by writing 1
 	 */
 	unsigned long val;
-	val = mfspr(tsr);
-	val |= 0x40000000;
-	mtspr(tsr, val);
+	val = mfspr(SPRN_TSR);
+	val |= TSR_WIS;
+	mtspr(SPRN_TSR, val);
 }
 #endif	/* CONFIG_WATCHDOG */
 
@@ -196,6 +214,7 @@ void dma_init(void) {
 
 	dma->satr0 = 0x02c40000;
 	dma->datr0 = 0x02c40000;
+	dma->sr0 = 0xfffffff; /* clear any errors */
 	asm("sync; isync; msync");
 	return;
 }
@@ -210,6 +229,10 @@ uint dma_check(void) {
 		status = dma->sr0;
 	}
 
+	/* clear MR0[CS] channel start bit */
+	dma->mr0 &= 0x00000001;
+	asm("sync;isync;msync");
+
 	if (status != 0) {
 		printf ("DMA Error: status = %x\n", status);
 	}
@@ -245,6 +268,10 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	if (p != NULL)
 		*p = cpu_to_be32(clock);
 
+	p = ft_get_prop(blob, "/qe@e0080000/" OF_CPU "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
 	p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
 	if (p != NULL)
 		*p = cpu_to_be32(clock);
@@ -255,21 +282,41 @@ ft_cpu_setup(void *blob, bd_t *bd)
 
 #if defined(CONFIG_MPC85XX_TSEC1)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enetaddr, 6);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
+	if (p)
 		memcpy(p, bd->bi_enetaddr, 6);
 #endif
 
 #if defined(CONFIG_HAS_ETH1)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enet1addr, 6);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
+	if (p)
 		memcpy(p, bd->bi_enet1addr, 6);
 #endif
 
 #if defined(CONFIG_HAS_ETH2)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enet2addr, 6);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
+	if (p)
 		memcpy(p, bd->bi_enet2addr, 6);
 #endif
 
 #if defined(CONFIG_HAS_ETH3)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enet3addr, 6);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
+	if (p)
 		memcpy(p, bd->bi_enet3addr, 6);
 #endif
 
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 9f4d36c1ab..9517146ed2 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -143,12 +143,10 @@ void cpu_init_f (void)
 	memctl->br1 = CFG_BR1_PRELIM;
 #endif
 
-#if !defined(CONFIG_MPC85xx)
 #if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
 	memctl->or2 = CFG_OR2_PRELIM;
 	memctl->br2 = CFG_BR2_PRELIM;
 #endif
-#endif
 
 #if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
 	memctl->or3 = CFG_OR3_PRELIM;
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 84f839ae1e..3c1a323aad 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -90,14 +90,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	pcix->powbar1  = (CFG_PCI1_MEM_PHYS >> 12) & 0x000fffff;
 	pcix->powbear1 = 0x00000000;
 	pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
-			POWAR_MEM_WRITE | POWAR_MEM_512M);
+			POWAR_MEM_WRITE | (__ilog2(CFG_PCI1_MEM_SIZE) - 1));
 
 	pcix->potar2  = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
 	pcix->potear2  = 0x00000000;
 	pcix->powbar2  = (CFG_PCI1_IO_PHYS >> 12) & 0x000fffff;
 	pcix->powbear2 = 0x00000000;
 	pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
-			POWAR_IO_WRITE | POWAR_IO_1M);
+			POWAR_IO_WRITE | (__ilog2(CFG_PCI1_IO_SIZE) - 1));
 
 	pcix->pitar1 = 0x00000000;
 	pcix->piwbar1 = 0x00000000;
@@ -175,14 +175,14 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 	pcix2->powbar1  = (CFG_PCI2_MEM_PHYS >> 12) & 0x000fffff;
 	pcix2->powbear1 = 0x00000000;
 	pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
-			POWAR_MEM_WRITE | POWAR_MEM_512M);
+			POWAR_MEM_WRITE | (__ilog2(CFG_PCI2_MEM_SIZE) - 1));
 
 	pcix2->potar2  = (CFG_PCI2_IO_BASE >> 12) & 0x000fffff;
 	pcix2->potear2  = 0x00000000;
 	pcix2->powbar2  = (CFG_PCI2_IO_PHYS >> 12) & 0x000fffff;
 	pcix2->powbear2 = 0x00000000;
 	pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
-			POWAR_IO_WRITE | POWAR_IO_1M);
+			POWAR_IO_WRITE | (__ilog2(CFG_PCI2_IO_SIZE) - 1));
 
 	pcix2->pitar1 = 0x00000000;
 	pcix2->piwbar1 = 0x00000000;
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 6da5367a70..3777f49adc 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -263,13 +263,14 @@ spd_sdram(void)
 	}
 
 	/*
-	 * Adjust DDR II IO voltage biasing.  It just makes it work.
+	 * Adjust DDR II IO voltage biasing.
+	 * Only 8548 rev 1 needs the fix
 	 */
-	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		gur->ddrioovcr = (0
-				  | 0x80000000		/* Enable */
-				  | 0x10000000		/* VSEL to 1.8V */
-				  );
+	if ((SVR_VER(get_svr()) == SVR_8548_E) &&
+			(SVR_MJREV(get_svr()) == 1) &&
+			(spd.mem_type == SPD_MEMTYPE_DDR2)) {
+		gur->ddrioovcr = (0x80000000	/* Enable */
+				  | 0x10000000);/* VSEL to 1.8V */
 	}
 
 	/*
@@ -786,14 +787,17 @@ spd_sdram(void)
 	 * Is this an ECC DDR chip?
 	 * But don't mess with it if the DDR controller will init mem.
 	 */
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+#ifdef CONFIG_DDR_ECC
 	if (spd.config == 0x02) {
+#ifndef CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 		ddr->err_disable = 0x0000000d;
+#endif
 		ddr->err_sbe = 0x00ff0000;
 	}
+
 	debug("DDR: err_disable = 0x%08x\n", ddr->err_disable);
 	debug("DDR: err_sbe = 0x%08x\n", ddr->err_sbe);
-#endif
+#endif /* CONFIG_DDR_ECC */
 
 	asm("sync;isync;msync");
 	udelay(500);
@@ -991,17 +995,24 @@ setup_laws_and_tlbs(unsigned int memsize)
 		break;
 	case 256:
 	case 512:
+		tlb_size = BOOKE_PAGESZ_256M;
+		break;
 	case 1024:
 	case 2048:
-		tlb_size = BOOKE_PAGESZ_256M;
+		if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx))
+			tlb_size = BOOKE_PAGESZ_1G;
+		else
+			tlb_size = BOOKE_PAGESZ_256M;
 		break;
 	default:
 		puts("DDR: only 16M,32M,64M,128M,256M,512M,1G and 2G are supported.\n");
 
 		/*
 		 * The memory was not able to be mapped.
+		 * Default to a small size.
 		 */
-		return 0;
+		tlb_size = BOOKE_PAGESZ_64M;
+		memsize=64;
 		break;
 	}
 
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index ca81ee7352..12359a2d64 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -37,49 +37,21 @@ void get_sys_info (sys_info_t * sysInfo)
 {
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
-	uint plat_ratio,e500_ratio;
+	uint plat_ratio,e500_ratio,half_freqSystemBus;
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
-	switch(plat_ratio) {
-	case 0x02:
-	case 0x03:
-	case 0x04:
-	case 0x05:
-	case 0x06:
-	case 0x08:
-	case 0x09:
-	case 0x0a:
-	case 0x0c:
-	case 0x10:
-		sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
-		break;
-	default:
-		sysInfo->freqSystemBus = 0;
-		break;
-	}
-
+	sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
 	e500_ratio = (gur->porpllsr) & 0x003f0000;
 	e500_ratio >>= 16;
-	switch(e500_ratio) {
-	case 0x04:
-		sysInfo->freqProcessor = 2*sysInfo->freqSystemBus;
-		break;
-	case 0x05:
-		sysInfo->freqProcessor = 5*sysInfo->freqSystemBus/2;
-		break;
-	case 0x06:
-		sysInfo->freqProcessor = 3*sysInfo->freqSystemBus;
-		break;
-	case 0x07:
-		sysInfo->freqProcessor = 7*sysInfo->freqSystemBus/2;
-		break;
-	default:
-		sysInfo->freqProcessor = 0;
-		break;
-	}
+
+	/* Divide before multiply to avoid integer
+	 * overflow for processor speeds above 2GHz */
+	half_freqSystemBus = sysInfo->freqSystemBus/2;
+	sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
 }
 
+
 int get_clocks (void)
 {
 	sys_info_t sys_info;
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index f96a4c3f8b..20c7ebc723 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -251,13 +251,10 @@ _start_e500:
 	 */
 	bl	tlb1_entry
 	mr	r5,r0
-	li	r1,0x0020	/* max 16 TLB1 plus some TLB0 entries */
-	mtctr	r1
 	lwzu	r4,0(r5)	/* how many TLB1 entries we actually use */
+	mtctr	r4
 
-0:	cmpwi	r4,0
-	beq	1f
-	lwzu	r0,4(r5)
+0:	lwzu	r0,4(r5)
 	lwzu	r1,4(r5)
 	lwzu	r2,4(r5)
 	lwzu	r3,4(r5)
@@ -269,7 +266,6 @@ _start_e500:
 	msync
 	tlbwe
 	isync
-	addi	r4,r4,-1
 	bdnz	0b
 
 1:
@@ -301,20 +297,16 @@ _start_e500:
 
 	bl	law_entry
 	mr	r6,r0
-	li	r1,0x0007	/* 8 LAWs, but reserve one for boot-over-rio-or-pci */
-	mtctr	r1
 	lwzu	r5,0(r6)	/* how many windows we actually use */
+	mtctr	r5
 
 	li	r2,0x0c28	/* the first pair is reserved for boot-over-rio-or-pci */
 	li	r1,0x0c30
 
-0:	cmpwi	r5,0
-	beq	1f
-	lwzu	r4,4(r6)
+0:	lwzu	r4,4(r6)
 	lwzu	r3,4(r6)
 	stwx	r4,r7,r2
 	stwx	r3,r7,r1
-	addi	r5,r5,-1
 	addi	r2,r2,0x0020
 	addi	r1,r1,0x0020
 	bdnz	0b