mpc5xxx: Remove all references to MGT5100

We do not support a processor that never reached a real customer.

Signed-off-by: Detlev Zundel <dzu@denx.de>

10 files changed, 10 insertions, 443 deletions

diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index 06fdbcfb72..0ee0611550 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-SOBJS	= io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
+SOBJS	= io.o firmware_sc_task_bestcomm.impl.o
 COBJS	= i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \
 	  loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
 
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index edfb8282b7..b20234d32e 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -50,16 +50,10 @@ int checkcpu (void)
 {
 	ulong clock = gd->cpu_clk;
 	char buf[32];
-#ifndef CONFIG_MGT5100
 	uint svr, pvr;
-#endif
 
 	puts ("CPU:   ");
 
-#ifdef CONFIG_MGT5100
-	puts   (CPU_ID_STR);
-	printf (" (JTAG ID %08lx)", *(vu_long *)MPC5XXX_CDM_JTAGID);
-#else
 	svr = get_svr();
 	pvr = get_pvr();
 
@@ -77,7 +71,6 @@ int checkcpu (void)
 
 	printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
 		PVR_MAJ(pvr), PVR_MIN(pvr));
-#endif
 	printf (" at %s MHz\n", strmhz (buf, clock));
 	return 0;
 }
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index 560c9b311c..9daf3755ac 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -53,10 +53,6 @@ void cpu_init_f (void)
 		(struct mpc5xxx_gpt *) MPC5XXX_GPT;
 #endif /* CONFIG_WATCHDOG */
 	unsigned long addecr = (1 << 25); /* Boot_CS */
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_MGT5100)
-	addecr |= (1 << 22); /* SDRAM enable */
-#endif
 	/* Pointer is writable since we allocated a register for it */
 	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
 
@@ -136,7 +132,6 @@ void cpu_init_f (void)
 	out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG);
 #endif
 
-#if defined(CONFIG_MPC5200)
 	addecr |= 1;
 #if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE)
 	out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START));
@@ -164,14 +159,9 @@ void cpu_init_f (void)
 #if defined(CONFIG_SYS_CS_DEADCYCLE)
 	out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE);
 #endif
-#endif /* CONFIG_MPC5200 */
 
 	/* Enable chip selects */
-#if defined(CONFIG_MGT5100)
-	out_be32(&mm->addecr, addecr);
-#elif defined(CONFIG_MPC5200)
 	out_be32(&mm->ipbi_ws_ctrl, addecr);
-#endif
 	out_be32(&lpb->cs_ctrl, (1 << 24));
 
 	/* Setup pin multiplexing */
@@ -179,7 +169,6 @@ void cpu_init_f (void)
 	out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG);
 #endif
 
-#if defined(CONFIG_MPC5200)
 	/* enable timebase */
 	setbits_be32(&xlb->config, (1 << 13));
 
@@ -187,33 +176,29 @@ void cpu_init_f (void)
 	setbits_be32(&xlb->config, (1 << 15));
 	out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d);
 
-# if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 	/* Motorola reports IPB should better run at 133 MHz. */
-#  if defined(CONFIG_MGT5100)
-	setbits_be32(&mm->addecr, 1);
-#  elif defined(CONFIG_MPC5200)
 	setbits_be32(&mm->ipbi_ws_ctrl, 1);
-#  endif
 	/* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
 	addecr = in_be32(&cdm->cfg);
 	addecr &= ~0x103;
-#  if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
+# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
 	/* pci_clk_sel = 0x01 -> IPB_CLK/2 */
 	addecr |= 0x01;
-#  else
+# else
 	/* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
 	addecr |= 0x02;
-#  endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
+# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
 	out_be32(&cdm->cfg, addecr);
-# endif	/* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
+#endif	/* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
 	/* Configure the XLB Arbiter */
 	out_be32(&xlb->master_pri_enable, 0xff);
 	out_be32(&xlb->master_priority, 0x11111111);
 
-# if defined(CONFIG_SYS_XLB_PIPELINING)
+#if defined(CONFIG_SYS_XLB_PIPELINING)
 	/* Enable piplining */
 	clrbits_be32(&xlb->config, (1 << 31));
-# endif
+#endif
 
 #if defined(CONFIG_WATCHDOG)
 	/* Charge the watchdog timer - prescaler = 64k, count = 64k*/
@@ -222,8 +207,6 @@ void cpu_init_f (void)
 
 	reset_5xxx_watchdog();
 #endif /* CONFIG_WATCHDOG */
-
-#endif	/* CONFIG_MPC5200 */
 }
 
 /*
@@ -235,11 +218,7 @@ int cpu_init_r (void)
 		(struct mpc5xxx_intr *) MPC5XXX_ICTL;
 
 	/* mask all interrupts */
-#if defined(CONFIG_MGT5100)
-	out_be32(&intr->per_mask, 0xfffffc00);
-#elif defined(CONFIG_MPC5200)
 	out_be32(&intr->per_mask, 0xffffff00);
-#endif
 	setbits_be32(&intr->main_mask, 0x0001ffff);
 	clrbits_be32(&intr->ctrl, 0x00000f00);
 	/* route critical ints to normal ints */
diff --git a/cpu/mpc5xxx/firmware_sc_task.impl.S b/cpu/mpc5xxx/firmware_sc_task.impl.S
deleted file mode 100644
index b668ee5cf8..0000000000
--- a/cpu/mpc5xxx/firmware_sc_task.impl.S
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Copyright (C) 2001, Software Center, Motorola China.
- *
- * This file contains microcode for the FEC controller of the MGT5100 CPU.
- */
-
-#include <config.h>
-
-#if defined(CONFIG_MGT5100)
-
-/* sas/sccg, gas target */
-.section	smartdmaInitData,"aw",@progbits	/* Initialized data for task variables */
-.section	smartdmaTaskTable,"aw",@progbits	/* Task tables */
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry:		/* Task 0 */
-.long	scEthernetRecv_TDT - taskTable	/* Task 0 Descriptor Table */
-.long	scEthernetRecv_TDT - taskTable + 0x000000a4
-.long	scEthernetRecv_VarTab - taskTable	/* Task 0 Variable Table */
-.long	scEthernetRecv_FDT - taskTable + 0x03	/* Task 0 Function Descriptor Table & Flags */
-.long	0x00000000
-.long	0x00000000
-.long	scEthernetRecv_CSave - taskTable	/* Task 0 context save space */
-.long	0xf0000000
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry:		/* Task 1 */
-.long	scEthernetXmit_TDT - taskTable	/* Task 1 Descriptor Table */
-.long	scEthernetXmit_TDT - taskTable + 0x000000d0
-.long	scEthernetXmit_VarTab - taskTable	/* Task 1 Variable Table */
-.long	scEthernetXmit_FDT - taskTable + 0x03	/* Task 1 Function Descriptor Table & Flags */
-.long	0x00000000
-.long	0x00000000
-.long	scEthernetXmit_CSave - taskTable	/* Task 1 context save space */
-.long	0xf0000000
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT:	/* Task 0 Descriptor Table */
-.long	0xc4c50000	/* 0000:  LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long	0x84c5e000	/* 0004:  LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long	0x10001f08	/* 0008:    DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x10000380	/* 000C:    DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x00000f88	/* 0010:    DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long	0x81980000	/* 0014:  LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long	0x10000780	/* 0018:    DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x60000000	/* 001C:    DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long	0x010c504c	/* 0020:    DRD2B1: var4 = EU1(); EU1(var1,var12)  */
-.long	0x82180349	/* 0024:  LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long	0x81c68004	/* 0028:    LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long	0x70000000	/* 002C:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long	0x018c504e	/* 0030:      DRD2B1: var6 = EU1(); EU1(var1,var14)  */
-.long	0x70000000	/* 0034:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long	0x020c504f	/* 0038:      DRD2B1: var8 = EU1(); EU1(var1,var15)  */
-.long	0x00000b88	/* 003C:      DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long	0x8000d184	/* 0040:    LCDEXT: idx1 = 0xf0003184; ; */
-.long	0xc6990452	/* 0044:    LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */
-.long	0x81486010	/* 0048:    LCD: idx3 = var2 + var16; ; idx3 += inc2 */
-.long	0x006acf88	/* 004C:      DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long	0x8000d184	/* 0050:    LCDEXT: idx1 = 0xf0003184; ; */
-.long	0x86810492	/* 0054:    LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */
-.long	0x006acf88	/* 0058:      DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long	0x8000d184	/* 005C:    LCDEXT: idx1 = 0xf0003184; ; */
-.long	0x868184d2	/* 0060:    LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */
-.long	0x000acf88	/* 0064:      DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */
-.long	0xc318839b	/* 0068:    LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */
-.long	0x80190000	/* 006C:    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long	0x04008468	/* 0070:      DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long	0xc4038358	/* 0074:    LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */
-.long	0x81c50000	/* 0078:    LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long	0x1000cb18	/* 007C:      DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x00000f18	/* 0080:      DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long	0xc4188364	/* 0084:    LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */
-.long	0x83990000	/* 0088:    LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long	0x10000c00	/* 008C:      DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x0000c800	/* 0090:      DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long	0x81988000	/* 0094:    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long	0x10000788	/* 0098:      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x60000000	/* 009C:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long	0x080c504c	/* 00A0:      DRD2B1: idx0 = EU1(); EU1(var1,var12)  */
-.long	0x000001f8	/* 00A4(:0):    NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT:	/* Task 1 Descriptor Table */
-.long	0x80014800	/* 0000:  LCDEXT: idx0 = 0xf0004800; ; */
-.long	0x85c60004	/* 0004:  LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long	0x10002308	/* 0008:    DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x10000f88	/* 000C:    DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x00000380	/* 0010:    DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long	0x81980000	/* 0014:  LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long	0x10000780	/* 0018:    DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x60000000	/* 001C:    DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long	0x024c504d	/* 0020:    DRD2B1: var9 = EU1(); EU1(var1,var13)  */
-.long	0x84980309	/* 0024:  LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long	0xc0004003	/* 0028:    LCDEXT: idx1 = 0x00000003; ; */
-.long	0x81c60004	/* 002C:    LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long	0x70000000	/* 0030:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long	0x010c504e	/* 0034:      DRD2B1: var4 = EU1(); EU1(var1,var14)  */
-.long	0x70000000	/* 0038:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long	0x014c504f	/* 003C:      DRD2B1: var5 = EU1(); EU1(var1,var15)  */
-.long	0x70000000	/* 0040:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long	0x028c5050	/* 0044:      DRD2B1: var10 = EU1(); EU1(var1,var16)  */
-.long	0x70000000	/* 0048:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long	0x018c5051	/* 004C:      DRD2B1: var6 = EU1(); EU1(var1,var17)  */
-.long	0x10000b90	/* 0050:      DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x60000000	/* 0054:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long	0x01cc50a1	/* 0058:      DRD2B1: var7 = EU1(); EU1(var2,idx1)  */
-.long	0xc2988312	/* 005C:    LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long	0x83490000	/* 0060:    LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long	0x00001b10	/* 0064:      DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long	0x8000d1a4	/* 0068:    LCDEXT: idx1 = 0xf00031a4; ; */
-.long	0x8301031c	/* 006C:    LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */
-.long	0x008ac798	/* 0070:      DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */
-.long	0x8000d1a4	/* 0074:    LCDEXT: idx1 = 0xf00031a4; ; */
-.long	0xc1430000	/* 0078:    LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long	0x82998312	/* 007C:    LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long	0x088ac790	/* 0080:      DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */
-.long	0x81988000	/* 0084:    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long	0x60000100	/* 0088:      DRD2A: EU0=0 EU1=1 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long	0x0c4c5c4d	/* 008C:      DRD2B1: *idx1 = EU1(); EU1(*idx1,var13)  */
-.long	0xc21883ad	/* 0090:    LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long	0x80190000	/* 0094:    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long	0x04008460	/* 0098:      DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long	0xc4052305	/* 009C:    LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long	0x81c98000	/* 00A0:    LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */
-.long	0x1000c718	/* 00A4:      DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x00000f18	/* 00A8:      DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long	0xc4188000	/* 00AC:    LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long	0x85190312	/* 00B0:    LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long	0x10000c00	/* 00B4:      DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x1000c400	/* 00B8:      DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x00008860	/* 00BC:      DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long	0x81988000	/* 00C0:    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long	0x10000788	/* 00C4:      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long	0x60000000	/* 00C8:      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long	0x080c504d	/* 00CC:      DRD2B1: idx0 = EU1(); EU1(var1,var13)  */
-.long	0x000001f8	/* 00D0(:0):    NOP */
-
-.align	8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab:	/* Task 0 Variable Table */
-.long	0x00000000	/* var[0] */
-.long	0x00000000	/* var[1] */
-.long	0x00000000	/* var[2] */
-.long	0x00000000	/* var[3] */
-.long	0x00000000	/* var[4] */
-.long	0x00000000	/* var[5] */
-.long	0x00000000	/* var[6] */
-.long	0x00000000	/* var[7] */
-.long	0x00000000	/* var[8] */
-.long	0xf0004800	/* var[9] */
-.long	0x00000008	/* var[10] */
-.long	0x0000000c	/* var[11] */
-.long	0x80000000	/* var[12] */
-.long	0x00000000	/* var[13] */
-.long	0x10000000	/* var[14] */
-.long	0x20000000	/* var[15] */
-.long	0x000005e4	/* var[16] */
-.long	0x0000000e	/* var[17] */
-.long	0x000005e0	/* var[18] */
-.long	0x00000004	/* var[19] */
-.long	0x00000000	/* var[20] */
-.long	0x00000000	/* var[21] */
-.long	0x00000000	/* var[22] */
-.long	0x00000000	/* var[23] */
-.long	0x00000000	/* inc[0] */
-.long	0x60000000	/* inc[1] */
-.long	0x20000001	/* inc[2] */
-.long	0x80000000	/* inc[3] */
-.long	0x40000000	/* inc[4] */
-.long	0x00000000	/* inc[5] */
-.long	0x00000000	/* inc[6] */
-.long	0x00000000	/* inc[7] */
-
-.align	8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab:	/* Task 1 Variable Table */
-.long	0x00000000	/* var[0] */
-.long	0x00000000	/* var[1] */
-.long	0x00000000	/* var[2] */
-.long	0x00000000	/* var[3] */
-.long	0x00000000	/* var[4] */
-.long	0x00000000	/* var[5] */
-.long	0x00000000	/* var[6] */
-.long	0x00000000	/* var[7] */
-.long	0x00000000	/* var[8] */
-.long	0x00000000	/* var[9] */
-.long	0x00000000	/* var[10] */
-.long	0xf0004800	/* var[11] */
-.long	0x00000000	/* var[12] */
-.long	0x80000000	/* var[13] */
-.long	0x10000000	/* var[14] */
-.long	0x08000000	/* var[15] */
-.long	0x20000000	/* var[16] */
-.long	0x0000ffff	/* var[17] */
-.long	0xffffffff	/* var[18] */
-.long	0x00000008	/* var[19] */
-.long	0x00000000	/* var[20] */
-.long	0x00000000	/* var[21] */
-.long	0x00000000	/* var[22] */
-.long	0x00000000	/* var[23] */
-.long	0x00000000	/* inc[0] */
-.long	0x60000000	/* inc[1] */
-.long	0x40000000	/* inc[2] */
-.long	0x4000ffff	/* inc[3] */
-.long	0xe0000001	/* inc[4] */
-.long	0x80000000	/* inc[5] */
-.long	0x00000000	/* inc[6] */
-.long	0x00000000	/* inc[7] */
-
-.align	8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT:	/* Task 0 Function Descriptor Table */
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x05800000	/* and(), EU# 1 */
-.long	0x05400000	/* andn(), EU# 1 */
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-
-.align	8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT:	/* Task 1 Function Descriptor Table */
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x05800000	/* and(), EU# 1 */
-.long	0x05400000	/* andn(), EU# 1 */
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-.long	0x00000000
-
-
-.align	8
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave:	/* Task 0 context save space */
-.space	256, 0x0
-
-
-.align	8
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave:	/* Task 1 context save space */
-.space	256, 0x0
-
-#endif /* CONFIG_MGT5100 */
diff --git a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
index d140c7e989..00c23121ac 100644
--- a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
+++ b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
@@ -6,8 +6,6 @@
 
 #include <config.h>
 
-#if defined(CONFIG_MPC5200)
-
 /* sas/sccg, gas target */
 .section        smartdmaInitData,"aw",@progbits	/* Initialized data for task variables */
 .section        smartdmaTaskTable,"aw",@progbits	/* Task tables */
@@ -359,5 +357,3 @@ scEthernetRecv_CSave:	/* Task 0 context save space */
 .globl scEthernetXmit_CSave
 scEthernetXmit_CSave:	/* Task 1 context save space */
 .space  128, 0x0
-
-#endif /* CONFIG_MPC5200 */
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
index 225738a073..8268f8afe1 100644
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ b/cpu/mpc5xxx/pci_mpc5200.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_PCI) && defined(CONFIG_MPC5200)
+#if defined(CONFIG_PCI)
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -184,4 +184,4 @@ void pci_mpc5xxx_init (struct pci_controller *hose)
 
 	hose->last_busno = pci_hose_scan(hose);
 }
-#endif /* CONFIG_PCI && CONFIG_MPC5200 */
+#endif /* CONFIG_PCI */
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index a8a384aa58..66759887c6 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -50,8 +50,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PSC_BASE MPC5XXX_PSC2
 #elif CONFIG_PSC_CONSOLE == 3
 #define PSC_BASE MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PSC_CONSOLE must be in 1, 2 or 3
 #elif CONFIG_PSC_CONSOLE == 4
 #define PSC_BASE MPC5XXX_PSC4
 #elif CONFIG_PSC_CONSOLE == 5
@@ -73,8 +71,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define PSC_BASE2 MPC5XXX_PSC2
 #elif CONFIG_PSC_CONSOLE2 == 3
 #define PSC_BASE2 MPC5XXX_PSC3
-#elif defined(CONFIG_MGT5100)
-#error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3
 #elif CONFIG_PSC_CONSOLE2 == 4
 #define PSC_BASE2 MPC5XXX_PSC4
 #elif CONFIG_PSC_CONSOLE2 == 5
@@ -104,23 +100,14 @@ int serial_init (void)
 	psc->command = PSC_SEL_MODE_REG_1;
 
 	/* select clock sources */
-#if defined(CONFIG_MGT5100)
-	psc->psc_clock_select = 0xdd00;
-	baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
 	psc->psc_clock_select = 0;
 	baseclk = (gd->ipb_clk + 16) / 32;
-#endif
 
 	/* switch to UART mode */
 	psc->sicr = 0;
 
 	/* configure parity, bit length and so on */
-#if defined(CONFIG_MGT5100)
-	psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#elif defined(CONFIG_MPC5200)
 	psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
-#endif
 	psc->mode = PSC_MODE_ONE_STOP;
 
 	/* set up UART divisor */
@@ -246,11 +233,7 @@ void serial_setbrg(void)
 #endif
 	unsigned long baseclk, div;
 
-#if defined(CONFIG_MGT5100)
-	baseclk = (CONFIG_SYS_MPC5XXX_CLKIN + 16) / 32;
-#elif defined(CONFIG_MPC5200)
 	baseclk = (gd->ipb_clk + 16) / 32;
-#endif
 
 	/* set up UART divisor */
 	div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index d499da5036..ba49944210 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -111,9 +111,6 @@ boot_warm:
 # if defined(CONFIG_SYS_RAMBOOT)
 #  error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
 # endif /* CONFIG_SYS_RAMBOOT */
-# if defined(CONFIG_MGT5100)
-#  error CONFIG_SYS_LOWBOOT is incompatible with MGT5100
-# endif /* CONFIG_MGT5100 */
 	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
 	lis	r3,	START_REG(CONFIG_SYS_BOOTCS_START)@h
 	ori	r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
@@ -145,14 +142,9 @@ lowboot_reentry:
 #if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
 	lis	r3, CONFIG_SYS_MBAR@h
 	ori	r3, r3, CONFIG_SYS_MBAR@l
-#if defined(CONFIG_MPC5200)
 	/* MBAR is mirrored into the MBAR SPR */
 	mtspr	MBAR,r3
 	rlwinm	r3, r3, 16, 16, 31
-#endif
-#if defined(CONFIG_MGT5100)
-	rlwinm	r3, r3, 17, 15, 31
-#endif
 	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
 	stw	r3, 0(r4)
 #endif /* CONFIG_SYS_DEFAULT_MBAR */
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
index 66a4af8d8e..7976e4df7d 100644
--- a/cpu/mpc5xxx/usb_ohci.c
+++ b/cpu/mpc5xxx/usb_ohci.c
@@ -76,13 +76,8 @@
 #define m16_swap(x) swap_16(x)
 #define m32_swap(x) swap_32(x)
 
-#ifdef CONFIG_MPC5200
 #define ohci_cpu_to_le16(x) (x)
 #define ohci_cpu_to_le32(x) (x)
-#else
-#define ohci_cpu_to_le16(x) swap_16(x)
-#define ohci_cpu_to_le32(x) swap_32(x)
-#endif
 
 /* global ohci_t */
 static ohci_t gohci;
@@ -803,9 +798,7 @@ static td_t * dl_reverse_done_list (ohci_t *ohci)
 				} else
 					td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
 			}
-#ifdef CONFIG_MPC5200
 			td_list->hwNextTD = 0;
-#endif
 		}
 
 		td_list->next_dl_td = td_rev;
diff --git a/cpu/mpc5xxx/usb_ohci.h b/cpu/mpc5xxx/usb_ohci.h
index 6eedbdd1d9..629b529a69 100644
--- a/cpu/mpc5xxx/usb_ohci.h
+++ b/cpu/mpc5xxx/usb_ohci.h
@@ -127,13 +127,8 @@ typedef struct td td_t;
 #define NUM_INTS 32	/* part of the OHCI standard */
 struct ohci_hcca {
 	__u32	int_table[NUM_INTS];	/* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
 	__u16	pad1;			/* set to 0 on each frame_no change */
 	__u16	frame_no;		/* current frame number */
-#else
-	__u16	frame_no;		/* current frame number */
-	__u16	pad1;			/* set to 0 on each frame_no change */
-#endif
 	__u32	done_head;		/* info returned for an interrupt */
 	u8		reserved_for_hc[116];
 } __attribute__((aligned(256)));