diff options
| author | Kever Yang <kever.yang@rock-chips.com> | 2017-11-02 15:16:35 +0800 |
|---|---|---|
| committer | Philipp Tomsich <philipp.tomsich@theobroma-systems.com> | 2017-11-07 09:16:57 +0100 |
| commit | 73e6dbe855f357a8330cfd53ff3033303611c1ad (patch) | |
| tree | 3ec103fc0db9ede9bd0bfc3d64b279cebfe5e9a7 /doc/README.rockchip | |
| parent | 8f4d62b403db45dfa8b1cadb9da9096c79b7df47 (diff) | |
rockchip: doc: update U-Boot location info
Update rockchip U-Boot location to 0x4000/16384.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Diffstat (limited to 'doc/README.rockchip')
| -rw-r--r-- | doc/README.rockchip | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/doc/README.rockchip b/doc/README.rockchip index 4b7be0b715..9d5af3d53d 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -99,13 +99,13 @@ To write an image that boots from an SD card (assumed to be /dev/sdc): ./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \ firefly-rk3288/spl/u-boot-spl-dtb.bin out && \ sudo dd if=out of=/dev/sdc seek=64 && \ - sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=256 + sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=16384 This puts the Rockchip header and SPL image first and then places the U-Boot -image at block 256 (i.e. 128KB from the start of the SD card). This +image at block 16384 (i.e. 4MB from the start of the SD card). This corresponds with this setting in U-Boot: - #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256 + #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x4000 Put this SD (or micro-SD) card into your board and reset it. You should see something like: |