diff options
| author | Codrin Ciubotariu <codrin.ciubotariu@freescale.com> | 2015-01-12 14:08:33 +0200 |
|---|---|---|
| committer | York Sun <yorksun@freescale.com> | 2015-01-16 09:32:38 -0800 |
| commit | 6706b115a632ac46ff13fd457c7b8a507b922d50 (patch) | |
| tree | dfdd6fb4022f522050ca16886fa1984e0b0dec5e /doc/README.t1040-l2switch | |
| parent | 27b57569549251f65d37fe95593997004f0f69b8 (diff) | |
net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP
This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP
is integrated in Freescale T1040 and T1020 SoCs.
The L2 switch has 10 Ethernet ports: 2 internal fixed-links
(ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps.
The external ports may be connected to PHYs over QSGMII and SGMII.
Commands have also been added to enable/disable a port and to
check a port's link speed, duplexity and status. The commands are:
ethsw port <port_nr> enable|disable - enable/disable an l2 switch port
ethsw port <port_nr> show - show an l2 switch port's configuration
port_nr=0..9; use "all" for all ports
For more detailse please see doc/README.t1040-l2switch
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'doc/README.t1040-l2switch')
| -rw-r--r-- | doc/README.t1040-l2switch | 48 |
1 files changed, 48 insertions, 0 deletions
diff --git a/doc/README.t1040-l2switch b/doc/README.t1040-l2switch new file mode 100644 index 0000000000..14dbf31bf2 --- /dev/null +++ b/doc/README.t1040-l2switch @@ -0,0 +1,48 @@ +This file contains information for VSC9953, a Vitesse L2 Switch IP +which is integrated in the T1040/T1020 Freescale SoCs. + +About Device: +============= +VSC9953 is an 8-port Gigabit Ethernet switch supports the following features: + - 8192 MAC addresses + - Static Address provisioning + - Dynamic learning of MAC addresses and aging + - 4096 VLANs + - Independent and shared VLAN learning (IVL, SVL) + - Policing with storm control and MC/BC protection + - IPv4 and IPv6 multicast + - Jumbo frames (9.6 KB) + - Access Control List + - VLAN editing, translation and remarking + - RMON counters per port + +Switch interfaces: + - 8 Gigabit switch ports (ports 0 to 7) are external and are connected to external PHYs + - 2 switch ports (ports 8 and 9) of 2.5 G are connected (fixed links) + to FMan ports (FM1@DTSEC1 and FM1@DTSEC2) + +Commands Overview: +============= +Commands supported + - enable/disable a port + - check a port's link speed, duplexity and status. + +Commands syntax + ethsw port <port_nr> enable|disable - enable/disable an l2 switch port + ethsw port <port_nr> show - show an l2 switch port's configuration + + port_nr=0..9; use "all" for all ports + +=> ethsw port all show + Port Status Link Speed Duplex + 0 enabled down 10 half + 1 enabled down 10 half + 2 enabled down 10 half + 3 enabled up 1000 full + 4 disabled down - half + 5 disabled down - half + 6 disabled down - half + 7 disabled down - half + 8 enabled up 2500 full + 9 enabled up 2500 full +=> |