diff options
| author | Masahiro Yamada <yamada.masahiro@socionext.com> | 2016-02-16 17:08:41 +0900 |
|---|---|---|
| committer | Masahiro Yamada <yamada.masahiro@socionext.com> | 2016-02-29 03:50:16 +0900 |
| commit | c231c4367ace6574e27ff0d1844d163fc471287b (patch) | |
| tree | 293c5a005ed85d2729ca1f0832822c9073d9ba8c /doc/README.uniphier | |
| parent | 569e4be172d1bf2041e97c0b65f872a7451b178a (diff) | |
ARM: uniphier: add emmcupdate command
The Boot ROM expects the boot image (SPL) in the Boot Partition 1.
So, updating images involves the hardware partition switch. It might
be a bit advanced for some users.
To be user-friendly, this commit adds a useful command to update the
images; just put SPL and U-Boot proper into the public directory of
the TFTP server and execute "run emmcupdate" from the command line.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Diffstat (limited to 'doc/README.uniphier')
| -rw-r--r-- | doc/README.uniphier | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/doc/README.uniphier b/doc/README.uniphier index c270ecb9a5..5ac52bd41f 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -78,6 +78,20 @@ directory, and then run the following command at the U-Boot command line: => run nandupdate +Burn U-Boot images to eMMC +-------------------------- + +Write two files to the Boot partition 1 of the eMMC device as follows: + - spl/u-boot-spl.bin at the offset address 0x00000000 + - u-boot.img at the offset address 0x00010000 + +If a TFTP server is available, the images can be easily updated. +Just copy the u-boot-spl-dtb.bin and u-boot-dtb.img to the TFTP public +directory, and then run the following command at the U-Boot command line: + + => run emmcupdate + + UniPhier specific commands -------------------------- |