summaryrefslogtreecommitdiff
path: root/doc/device-tree-bindings/misc
diff options
context:
space:
mode:
authorTero Kristo <t-kristo@ti.com>2020-02-14 11:18:15 +0200
committerLokesh Vutla <lokeshvutla@ti.com>2020-03-03 13:08:14 +0530
commit344eb6d572adfadb0a11196ef8cf6508f6c704df (patch)
tree809f2e3d8a35c2997872944fa44b9e0ba74a3bca /doc/device-tree-bindings/misc
parent8cd10a494f45b4d6174ff4b070102b5241747823 (diff)
misc: k3_esm: Add support for Texas Instruments K3 ESM driver
The ESM (Error Signaling Module) is used to route error signals within the K3 SoCs somewhat similar to interrupts. The handling for these is different though, and can be routed for hardware error handling, to be handled by safety processor or just as error interrupts handled by the main processor. The u-boot level ESM driver is just used to configure the ESM signals so that they get routed to proper destination. Signed-off-by: Tero Kristo <t-kristo@ti.com>
Diffstat (limited to 'doc/device-tree-bindings/misc')
-rw-r--r--doc/device-tree-bindings/misc/esm-k3.txt25
1 files changed, 25 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/misc/esm-k3.txt b/doc/device-tree-bindings/misc/esm-k3.txt
new file mode 100644
index 0000000000..01c8b6b294
--- /dev/null
+++ b/doc/device-tree-bindings/misc/esm-k3.txt
@@ -0,0 +1,25 @@
+Texas Instruments K3 ESM Binding
+======================
+
+ESM (Error Signaling Module) is an IP block on TI K3 devices that allows
+handling of safety events somewhat similar to what interrupt controller
+would do. The safety signals have their separate paths within the SoC,
+and they are handled by the ESM, which routes them to the proper
+destination, which can be system reset, interrupt controller, etc. In
+the simplest configuration the signals are just routed to reset the
+SoC.
+
+Required properties :
+- compatible : "ti,j721e-esm"
+- ti,esm-pins : integer array of esm events IDs to route to external event
+ pin which can be used to reset the SoC. The array can
+ have arbitrary amount of event IDs listed on it.
+
+Example
+=======
+
+ main_esm: esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <344>, <345>;
+ };