summaryrefslogtreecommitdiff
path: root/doc/device-tree-bindings/net
diff options
context:
space:
mode:
authorMichal Simek <michal.simek@xilinx.com>2020-02-17 10:38:57 +0100
committerJoe Hershberger <joe.hershberger@ni.com>2020-03-09 18:11:25 -0500
commit9f312b3d05b5f6f37e3521f5998fd00b4da2a77d (patch)
tree67941953786f185620769fae89a12007ed60f99a /doc/device-tree-bindings/net
parent9810489ca80f22b548590b7926c211fed46ce457 (diff)
dt-bindings: net: dp83867: Remove binding doc from U-Boot tree
U-Boot is having DT which doesn't cover all options currently supported by driver. DT binding is aligned with Linux kernel version available here. https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ti,dp83867.txt Based on my talk with Grygorii Strashko better will be to remove it. Also Linux kernel bindings are being converted to yaml that's another reason to do it only at one place. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Diffstat (limited to 'doc/device-tree-bindings/net')
-rw-r--r--doc/device-tree-bindings/net/ti,dp83867.txt35
1 files changed, 0 insertions, 35 deletions
diff --git a/doc/device-tree-bindings/net/ti,dp83867.txt b/doc/device-tree-bindings/net/ti,dp83867.txt
deleted file mode 100644
index 268220964a..0000000000
--- a/doc/device-tree-bindings/net/ti,dp83867.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Texas Instruments - dp83867 Giga bit ethernet phy
-
-Required properties:
- - reg - The ID number for the phy, usually a small integer
- - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
- - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
- for applicable values
- - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
- for applicable values
- - enet-phy-lane-swap - Indicates that PHY will swap the TX/RX lanes to
- compensate for the board being designed with the lanes swapped.
- - enet-phy-no-lane-swap - Indicates that PHY will disable swap of the
- TX/RX lanes.
- - ti,clk-output-sel - Muxing option for CLK_OUT pin. See dt-bindings/net/ti-dp83867.h
- for applicable values. The CLK_OUT pin can also
- be disabled by this property. When omitted, the
- PHY's default will be left as is.
-
-Default child nodes are standard Ethernet PHY device
-nodes as described in doc/devicetree/bindings/net/ethernet.txt
-
-Example:
-
- ethernet-phy@0 {
- reg = <0>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
- ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- enet-phy-lane-no-swap;
- ti,clk-output-sel = <DP83867_CLK_O_SEL_CHN_A_TCLK>;
- };
-
-Datasheet can be found:
-http://www.ti.com/product/DP83867IR/datasheet