m68k: add basic set of devicetrees

This patch adds a basic group of devicetrees, one for each
cpu family, including actually just uart and dspi devices,
since these are the drivers supporting devicetree (support
added in this patch-set).

Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

2 files changed, 49 insertions, 0 deletions

diff --git a/doc/device-tree-bindings/serial/mcf-uart.txt b/doc/device-tree-bindings/serial/mcf-uart.txt
new file mode 100644
index 0000000000..d73f764c01
--- /dev/null
+++ b/doc/device-tree-bindings/serial/mcf-uart.txt
@@ -0,0 +1,19 @@
+Freescale ColdFire UART
+
+Required properties:
+- compatible : should be "fsl,mcf-uart"
+- reg: start address and size of the registers
+
+Example:
+
+soc {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	uart0: uart@fc060000 {
+		compatible = "fsl,mcf-uart";
+		reg = <0xfc060000 0x40>;
+		status = "disabled";
+	};
+};
diff --git a/doc/device-tree-bindings/spi/spi-mcf-dspi.txt b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt
new file mode 100644
index 0000000000..860eb8ac85
--- /dev/null
+++ b/doc/device-tree-bindings/spi/spi-mcf-dspi.txt
@@ -0,0 +1,30 @@
+Freescale ColdFire DSPI controller
+
+Required properties:
+- compatible : "fsl,mcf-dspi"
+- #address-cells: <1>, as required by generic SPI binding
+- #size-cells: <0>, also as required by generic SPI binding
+- reg : offset and length of the register set for the device
+
+Optional properties:
+- spi-max-frequency : max supported spi frequency
+- num-cs : the number of the chipselect signals
+- spi-mode: spi motorola mode, 0 to 3
+- ctar-params: CTAR0 to 7 register configuration, as an array
+  of 8 integer fields for each register, where each register
+  is defined as: <fmsz, pcssck, pasc, pdt, cssck, asc, dt, br>.
+
+Example:
+
+dspi0: dspi@fc05c000 {
+	compatible = "fsl,mcf-dspi";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0xfc05c000 0x100>;
+	spi-max-frequency = <50000000>;
+	num-cs = <4>;
+	spi-mode = <0>;
+	ctar-fields = <7, 0, 0, 0, 0, 0, 1, 6>,
+		      <7, 0, 0, 0, 0, 0, 1, 6>,
+		      <7, 0, 0, 0, 0, 0, 1, 6>;
+};